linux-azure-5.15 vulnerabilities · Page 190

drm/atmel-hlcdc: fix memory leak from the atomic_destroy_state callback

In the Linux kernel, the following vulnerability has been resolved: drm/atmel-hlcdc: fix memory leak from the atomic_destroy_state callback After several commits, the slab memory increases. Some drm_crtc_commit objects are not freed. The atomic_destroy_state callback only put the framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function to put all the objects that are no longer needed. It has been seen after hours of usage of a graphics application or using kmemleak: unreferenced object 0xc63a6580 (size 64): comm "egt_basic", pid 171, jiffies 4294940784 hex dump (first 32 bytes): 40 50 34 c5 01 00 00 00 ff ff ff ff 8

• Update to 5.15.0-1117.126~20.04.1

hfsplus: pretend special inodes as regular files

In the Linux kernel, the following vulnerability has been resolved: hfsplus: pretend special inodes as regular files Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()") requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/ S_IFIFO/S_IFSOCK type, use S_IFREG for special inodes.

• Update to 5.15.0-1117.126~20.04.1

EFI/CPER: don't go past the ARM processor CPER record buffer

In the Linux kernel, the following vulnerability has been resolved: EFI/CPER: don't go past the ARM processor CPER record buffer There's a logic inside GHES/CPER to detect if the section_length is too small, but it doesn't detect if it is too big. Currently, if the firmware receives an ARM processor CPER record stating that a section length is big, kernel will blindly trust section_length, producing a very long dump. For instance, a 67 bytes record with ERR_INFO_NUM set 46198 and section length set to 854918320 would dump a lot of data going a way past the firmware memory-mapped area. Fix it by adding a logic to prevent it to go past the

• Update to 5.15.0-1117.126~20.04.1

fbdev: of: display_timing: fix refcount leak in of_get_display_timings()

In the Linux kernel, the following vulnerability has been resolved: fbdev: of: display_timing: fix refcount leak in of_get_display_timings() of_parse_phandle() returns a device_node with refcount incremented, which is stored in 'entry' and then copied to 'native_mode'. When the error paths at lines 184 or 192 jump to 'entryfail', native_mode's refcount is not decremented, causing a refcount leak. Fix this by changing the goto target from 'entryfail' to 'timingfail', which properly calls of_node_put(native_mode) before cleanup.

• Update to 5.15.0-1117.126~20.04.1

gfs2: fiemap page fault fix

In the Linux kernel, the following vulnerability has been resolved: gfs2: fiemap page fault fix In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode glock. This can lead to recursive glock taking if the fiemap buffer is memory mapped to the same inode and accessing it triggers a page fault. Fix by disabling page faults for iomap_fiemap() and faulting in the buffer by hand if necessary. Fixes xfstest generic/742.

• Update to 5.15.0-1117.126~20.04.1

arm64: Add support for TSV110 Spectre-BHB mitigation

In the Linux kernel, the following vulnerability has been resolved: arm64: Add support for TSV110 Spectre-BHB mitigation The TSV110 processor is vulnerable to the Spectre-BHB (Branch History Buffer) attack, which can be exploited to leak information through branch prediction side channels. This commit adds the MIDR of TSV110 to the list for software mitigation.

• Update to 5.15.0-1117.126~20.04.1

media: cx88: Add missing unmap in snd_cx88_hw_params()

In the Linux kernel, the following vulnerability has been resolved: media: cx88: Add missing unmap in snd_cx88_hw_params() In error path, add cx88_alsa_dma_unmap() to release resource acquired by cx88_alsa_dma_map().

• Update to 5.15.0-1117.126~20.04.1

wifi: libertas: fix WARNING in usb_tx_block

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix WARNING in usb_tx_block The function usb_tx_block() submits cardp->tx_urb without ensuring that any previous transmission on this URB has completed. If a second call occurs while the URB is still active (e.g. during rapid firmware loading), usb_submit_urb() detects the active state and triggers a warning: 'URB submitted while active'. Fix this by enforcing serialization: call usb_kill_urb() before submitting the new request. This ensures the URB is idle and safe to reuse.

• Update to 5.15.0-1117.126~20.04.1

iommu/amd: move wait_on_sem() out of spinlock

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: move wait_on_sem() out of spinlock With iommu.strict=1, the existing completion wait path can cause soft lockups under stressed environment, as wait_on_sem() busy-waits under the spinlock with interrupts disabled. Move the completion wait in iommu_completion_wait() out of the spinlock. wait_on_sem() only polls the hardware-updated cmd_sem and does not require iommu->lock, so holding the lock during the busy wait unnecessarily increases contention and extends the time with interrupts disabled.

HID: prodikeys: Check presence of pm->input_ep82

In the Linux kernel, the following vulnerability has been resolved: HID: prodikeys: Check presence of pm->input_ep82 Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, pm->input_ep82 stays NULL, which leads to a crash later. This does not happen with the real device, but can be provoked by imposing as one.

• Update to 5.15.0-1117.126~20.04.1

usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()

In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke() The ChipIdea UDC driver can encounter "not page aligned sg buffer" errors when a USB device is reconnected after being disconnected during an active transfer. This occurs because _ep_nuke() returns requests to the gadget layer without properly unmapping DMA buffers or cleaning up scatter-gather bounce buffers. Root cause: When a disconnect happens during a multi-segment DMA transfer, the request's num_mapped_sgs field and sgt.sgl pointer remain set with stale values. The request is returned to the gadget driver with

9p/xen: protect xen_9pfs_front_free against concurrent calls

In the Linux kernel, the following vulnerability has been resolved: 9p/xen: protect xen_9pfs_front_free against concurrent calls The xenwatch thread can race with other back-end change notifications and call xen_9pfs_front_free() twice, hitting the observed general protection fault due to a double-free. Guard the teardown path so only one caller can release the front-end state at a time, preventing the crash. This is a fix for the following double-free: [ 27.052347] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 27.052357] CPU: 0 UID: 0 PID: 32 Comm: xenwatc

media: i2c/tw9906: Fix potential memory leak in tw9906_probe()

In the Linux kernel, the following vulnerability has been resolved: media: i2c/tw9906: Fix potential memory leak in tw9906_probe() In one of the error paths in tw9906_probe(), the memory allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that by calling v4l2_ctrl_handler_free() on the handler in that error path.

• Update to 5.15.0-1117.126~20.04.1

kcm: fix zero-frag skb in frag_list on partial sendmsg error

In the Linux kernel, the following vulnerability has been resolved: kcm: fix zero-frag skb in frag_list on partial sendmsg error Syzkaller reported a warning in kcm_write_msgs() when processing a message with a zero-fragment skb in the frag_list. When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb, it allocates a new skb (tskb) and links it into the frag_list before copying data. If the copy subsequently fails (e.g. -EFAULT from user memory), tskb remains in the frag_list with zero fragments: head skb (msg being assembled, NOT yet in sk_write_queue) +-----------+ | frags[17] | (MAX_SKB_FRAGS, all filled with data)

soc: ti: k3-socinfo: Fix regmap leak on probe failure

In the Linux kernel, the following vulnerability has been resolved: soc: ti: k3-socinfo: Fix regmap leak on probe failure The mmio regmap allocated during probe is never freed. Switch to using the device managed allocator so that the regmap is released on probe failures (e.g. probe deferral) and on driver unbind.

• Update to 5.15.0-1117.126~20.04.1

ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access

In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS, This patch protects against invalid index out of bounds access to mw_sizes When invalid access print message to user that configuration is not valid.

• Update to 5.15.0-1117.126~20.04.1

smb: client: prevent races in ->query_interfaces()

In the Linux kernel, the following vulnerability has been resolved: smb: client: prevent races in ->query_interfaces() It was possible for two query interface works to be concurrently trying to update the interfaces. Prevent this by checking and updating iface_last_update under iface_lock.

drm/atmel-hlcdc: fix use-after-free of drm_crtc_commit after release

In the Linux kernel, the following vulnerability has been resolved: drm/atmel-hlcdc: fix use-after-free of drm_crtc_commit after release The atmel_hlcdc_plane_atomic_duplicate_state() callback was copying the atmel_hlcdc_plane state structure without properly duplicating the drm_plane_state. In particular, state->commit remained set to the old state commit, which can lead to a use-after-free in the next drm_atomic_commit() call. Fix this by calling __drm_atomic_helper_duplicate_plane_state(), which correctly clones the base drm_plane_state (including the ->commit pointer). It has been seen when closing and re-opening the device node while

• Update to 5.15.0-1117.126~20.04.1

team: avoid NETDEV_CHANGEMTU event when unregistering slave

In the Linux kernel, the following vulnerability has been resolved: team: avoid NETDEV_CHANGEMTU event when unregistering slave syzbot is reporting unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3 ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline] netdev_hold include/linux/netdevice.h:4429 [inline] inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286 inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_mtu net/core/dev.c:2318 [inlin

netfilter: nf_conntrack_h323: fix OOB read in decode_choice()

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: fix OOB read in decode_choice() In decode_choice(), the boundary check before get_len() uses the variable `len`, which is still 0 from its initialization at the top of the function: unsigned int type, ext, len = 0; ... if (ext || (son->attr & OPEN)) { BYTE_ALIGN(bs); if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */ return H323_ERROR_BOUND; len = get_len(bs); /* OOB read */ When the bitstream is exactly consumed (bs->cur == bs->end), the check nf_h323_error_boun

• Update to 5.15.0-1117.126~20.04.1