p PatchFirst

PatchFirst · Latest vulnerabilities

linux-bluefield vulnerabilities · Page 140

Vulnerabilities published for linux-bluefield in the last 30 days: 523. Listed in the KEV catalogue: 0.

Filter vulnerabilities
Clear filters

Vulnerabilities: 5417

  1. CVE-2026-45866

    High · CVSS 7.8EPSS 0.16%No fix published

    serial: caif: fix use-after-free in caif_serial ldisc_close()

    In the Linux kernel, the following vulnerability has been resolved: serial: caif: fix use-after-free in caif_serial ldisc_close() There is a use-after-free bug in caif_serial where handle_tx() may access ser->tty after the tty has been freed. The race condition occurs between ldisc_close() and packet transmission: CPU 0 (close) CPU 1 (xmit) ------------- ------------ ldisc_close() tty_kref_put(ser->tty) [tty may be freed here] <-- race window --> caif_xmit() handle_tx()

    Published Updated
  2. CVE-2026-45862

    High · CVSS 7.8EPSS 0.13%No fix published

    iommu/vt-d: Flush cache for PASID table before using it

    In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush cache for PASID table before using it When writing the address of a freshly allocated zero-initialized PASID table to a PASID directory entry, do that after the CPU cache flush for this PASID table, not before it, to avoid the time window when this PASID table may be already used by non-coherent IOMMU hardware while its contents in RAM is still some random old data, not zero-initialized.

    Published Updated
  3. CVE-2026-45858

    Medium · CVSS 5.5EPSS 0.16%No fix published

    ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1

    In the Linux kernel, the following vulnerability has been resolved: ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1 When allocating initialized blocks from a large unwritten extent, or when splitting an unwritten extent during end I/O and converting it to initialized, there is currently a potential issue of stale data if the extent needs to be split in the middle. 0 A B N [UUUUUUUUUUUU] U: unwritten extent [--DDDDDDDD--] D: valid data |<- ->| ----> this range needs to be initialized ext4_split_extent() first try to split this extent at B with EXT4_EXT_DATA_ENTIRE_VALID1 and E

    Published Updated
  4. CVE-2026-45857

    Medium · CVSS 5.7EPSS 0.16%No fix published

    scsi: csiostor: Fix dereference of null pointer rn

    In the Linux kernel, the following vulnerability has been resolved: scsi: csiostor: Fix dereference of null pointer rn The error exit path when rn is NULL ends up deferencing the null pointer rn via the use of the macro CSIO_INC_STATS. Fix this by adding a new error return path label after the use of the macro to avoid the deference.

    Published Updated
  5. CVE-2026-45856

    High · CVSS 7.1EPSS 0.19%No fix published

    RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send

    In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to userspace. Additionally,

    Published Updated
  6. CVE-2026-45852

    High · CVSS 7.8EPSS 0.2%No fix published

    RDMA/rxe: Fix double free in rxe_srq_from_init

    In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix double free in rxe_srq_from_init In rxe_srq_from_init(), the queue pointer 'q' is assigned to 'srq->rq.queue' before copying the SRQ number to user space. If copy_to_user() fails, the function calls rxe_queue_cleanup() to free the queue, but leaves the now-invalid pointer in 'srq->rq.queue'. The caller of rxe_srq_from_init() (rxe_create_srq) eventually calls rxe_srq_cleanup() upon receiving the error, which triggers a second rxe_queue_cleanup() on the same memory, leading to a double free. The call trace looks like this: kmem_cache_free+0x.../0x... rxe

    Published Updated
  7. CVE-2026-45850

    High · CVSS 8.8EPSS 0.16%No fix published

    ipvs: skip ipv6 extension headers for csum checks

    In the Linux kernel, the following vulnerability has been resolved: ipvs: skip ipv6 extension headers for csum checks Protocol checksum validation fails for IPv6 if there are extension headers before the protocol header. iph->len already contains its offset, so use it to fix the problem.

    Published Updated
  8. CVE-2026-45848

    Medium · CVSS 5.7EPSS 0.16%No fix published

    apparmor: fix NULL sock in aa_sock_file_perm

    In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL sock in aa_sock_file_perm Deal with the potential that sock and sock-sk can be NULL during socket setup or teardown. This could lead to an oops. The fix for NULL pointer dereference in __unix_needs_revalidation shows this is at least possible for af_unix sockets. While the fix for af_unix sockets applies for newer mediation this is still the fall back path for older af_unix mediation and other sockets, so ensure it is covered.

    Published Updated
  9. CVE-2025-71304

    Medium · CVSS 5.5EPSS 0.16%No fix published

    smack: /smack/doi: accept previously used values

    In the Linux kernel, the following vulnerability has been resolved: smack: /smack/doi: accept previously used values Writing to /smack/doi a value that has ever been written there in the past disables networking for non-ambient labels. E.g. # cat /smack/doi 3 # netlabelctl -p cipso list Configured CIPSO mappings (1) DOI value : 3 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (3) domain: "_" (IPv4) protocol: UNLABELED domain: DEFAULT (IPv4) protocol: CIPSO, DOI = 3 domain: DEFAULT (IPv6) protocol: UNLABELED # cat /smack/a

    Published Updated
  10. CVE-2026-45844

    Medium · CVSS 5.5EPSS 0.13%No fix published

    netfilter: arp_tables: fix IEEE1394 ARP payload parsing

    In the Linux kernel, the following vulnerability has been resolved: netfilter: arp_tables: fix IEEE1394 ARP payload parsing Weiming Shi says: "arp_packet_match() unconditionally parses the ARP payload assuming two hardware addresses are present (source and target). However, IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address field, and arp_hdr_len() already accounts for this by returning a shorter length for ARPHRD_IEEE1394 devices. As a result, on IEEE1394 interfaces arp_packet_match() advances past a nonexistent target hardware address and reads the wrong bytes for both the target device address comparison and the target

    Published Updated
  11. CVE-2026-45843

    High · CVSS 8.2EPSS 0.4%No fix published

    slip: bound decode() reads against the compressed packet length

    In the Linux kernel, the following vulnerability has been resolved: slip: bound decode() reads against the compressed packet length slhc_uncompress() parses a VJ-compressed TCP header by advancing a pointer through the packet via decode() and pull16(). Neither helper bounds-checks against isize, and decode() masks its return with & 0xffff so it can never return the -1 that callers test for -- those error paths are dead code. A short compressed frame whose change byte requests optional fields lets decode() read past the end of the packet. The over-read bytes are folded into the cached cstate and reflected into subsequent reconstructed packe

    Published Updated
  12. CVE-2026-45842

    Medium · CVSS 6.8EPSS 0.13%No fix published

    slip: reject VJ receive packets on instances with no rstate array

    In the Linux kernel, the following vulnerability has been resolved: slip: reject VJ receive packets on instances with no rstate array slhc_init() accepts rslots == 0 as a valid configuration, with the documented meaning of 'no receive compression'. In that case the allocation loop in slhc_init() is skipped, so comp->rstate stays NULL and comp->rslot_limit stays 0 (from the kzalloc of struct slcompress). The receive helpers do not defend against that configuration. slhc_uncompress() dereferences comp->rstate[x] when the VJ header carries an explicit connection ID, and slhc_remember() later assigns cs = &comp->rstate[...] after only comparin

    Published Updated
  13. CVE-2026-45841

    Medium · CVSS 5.5EPSS 0.13%No fix published

    netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULO

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULO nf_osf_match_one() computes ctx->window % f->wss.val in the OSF_WSS_MODULO branch with no guard for f->wss.val == 0. A CAP_NET_ADMIN user can add such a fingerprint via nfnetlink; a subsequent matching TCP SYN divides by zero and panics the kernel. Reject the bogus fingerprint in nfnl_osf_add_callback() above the per-option for-loop. f->wss is per-fingerprint, not per-option, so the check must run regardless of f->opt_num (including 0). Also reject wss.wc >= OSF_WSS_MAX; nf_osf_match_one() already treats that a

    Published Updated
  14. CVE-2026-45840

    Medium · CVSS 6.8EPSS 0.13%No fix published

    openvswitch: cap upcall PID array size and pre-size vport replies

    In the Linux kernel, the following vulnerability has been resolved: openvswitch: cap upcall PID array size and pre-size vport replies The vport netlink reply helpers allocate a fixed-size skb with nlmsg_new(NLMSG_DEFAULT_SIZE, ...) but serialize the full upcall PID array via ovs_vport_get_upcall_portids(). Since ovs_vport_set_upcall_portids() accepts any non-zero multiple of sizeof(u32) with no upper bound, a CAP_NET_ADMIN user can install a PID array large enough to overflow the reply buffer, causing nla_put() to fail with -EMSGSIZE and hitting BUG_ON(err < 0). On systems with unprivileged user namespaces enabled (e.g., Ubuntu default),

    Published Updated
  15. CVE-2026-45839

    High · CVSS 7.8EPSS 0.14%No fix published

    bpf: reject negative CO-RE accessor indices in bpf_core_parse_spec()

    In the Linux kernel, the following vulnerability has been resolved: bpf: reject negative CO-RE accessor indices in bpf_core_parse_spec() CO-RE accessor strings are colon-separated indices that describe a path from a root BTF type to a target field, e.g. "0:1:2" walks through nested struct members. bpf_core_parse_spec() parses each component with sscanf("%d"), so negative values like -1 are silently accepted. The subsequent bounds checks (access_idx >= btf_vlen(t)) only guard the upper bound and always pass for negative values because C integer promotion converts the __u16 btf_vlen result to int, making the comparison (int)(-1) >= (int)(N)

    Published Updated
  16. CVE-2026-45838

    Medium · CVSS 5.5EPSS 0.13%No fix published

    bpf: fix end-of-list detection in cgroup_storage_get_next_key()

    In the Linux kernel, the following vulnerability has been resolved: bpf: fix end-of-list detection in cgroup_storage_get_next_key() list_next_entry() never returns NULL -- when the current element is the last entry it wraps to the list head via container_of(). The subsequent NULL check is therefore dead code and get_next_key() never returns -ENOENT for the last element, instead reading storage->key from a bogus pointer that aliases internal map fields and copying the result to userspace. Replace it with list_entry_is_head() so the function correctly returns -ENOENT when there are no more entries.

    Published Updated
  17. CVE-2026-43503

    High · CVSS 8.8EPSS 1.99%Public exploitFix available

    net: skbuff: propagate shared-frag marker through frag-transfer helpers

    In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a referen

    • Update to 5.4.0-1120.127
    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →