p PatchFirst

PatchFirst · Latest vulnerabilities

linux-bluefield vulnerabilities · Page 26

Vulnerabilities published for linux-bluefield in the last 30 days: 468. Listed in the KEV catalogue: 0.

Filter vulnerabilities
Clear filters

Vulnerabilities: 5459

  1. CVE-2026-98077

    Not ratedEPSS 0.22%No fix published

    netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace()

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace() sip_skip_whitespace() returns dptr unchanged when its own loop exhausts the buffer (dptr == limit), instead of NULL like its sibling sip_follow_continuation() returns on its own "no more data" path. ct_sip_get_header() only checks for NULL after calling it: dptr = sip_skip_whitespace(dptr, limit); if (dptr == NULL) break; if (*dptr != ':' || ++dptr >= limit) break; so a recognized header name followed only by spaces/tabs running to the exact end of the SIP payload, with no colon,

    Published Updated
  2. CVE-2026-98076

    Not ratedEPSS 0.22%No fix published

    tracing/probes: Fix use-after-free on field name/type of events with multiple probes

    In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Fix use-after-free on field name/type of events with multiple probes The fields of a probe-based dynamic event (kprobe, uprobe, eprobe and fprobe events) are created in traceprobe_define_arg_fields() by handing the probe_arg name/type strings to trace_define_field(), which only stores the pointers without copying. Those strings are owned by the trace_probe and are freed when that probe is removed. An event can have several probes attached. The field list is defined only once, by the first probe that registers the event, but it is kept alive by any surviving

    Published Updated
  3. CVE-2026-98074

    Not ratedEPSS 0.18%No fix published

    bonding: do not clear curr_active_slave prematurely when releasing all slaves

    In the Linux kernel, the following vulnerability has been resolved: bonding: do not clear curr_active_slave prematurely when releasing all slaves When releasing all slaves during bond destruction (all == true), __bond_release_one() unconditionally clears bond->curr_active_slave to NULL in every iteration. If a backup slave is released before the active slave, bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(), which increments the active slave dev promiscuity counter and sets bond_info->primary_is_promisc = 1. Because bond->curr_active_slave was prematurely cleared to NULL when releasing the backup slave, the subsequent

    Published Updated
  4. CVE-2026-98072

    Not ratedEPSS 0.18%No fix published

    net/rds: use wq_has_sleeper() in release_in_xmit()

    In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in release_in_xmit() release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then checks waitqueue_active() to decide whether anyone needs waking. clear_bit_unlock() is only a release operation: it orders the critical section before the bit clear, but does not order the subsequent plain load of the wait queue head after it. The waiter side does the mirror image - it adds itself to the wait queue and then tests the bit. That is the classic store-buffering pattern: the releasing CPU can read the wait queue as empty while the waiting CP

    Published Updated
  5. CVE-2026-98071

    Not ratedEPSS 0.18%No fix published

    net/rds: clear cp_flags bits individually in rds_conn_path_reset()

    In the Linux kernel, the following vulnerability has been resolved: net/rds: clear cp_flags bits individually in rds_conn_path_reset() rds_conn_path_reset() wipes the whole flag word with a plain cp->cp_flags = 0 store. Every other accessor of that word uses atomic bitops, and some of them can run concurrently with the reset: RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the transport completion paths, neither of which holds anything that excludes the shutdown worker. A plain store racing an atomic read-modify-write on the same word is a data race, and whichever side loses has its update silently discarded. Clear the two

    Published Updated
  6. CVE-2026-98070

    High · CVSS 8.1EPSS 0.47%No fix published

    net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks()

    In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks() rds_tcp_reset_callbacks() quiesces the transmit path by setting the path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to be sampled clear before swapping the underlying socket and calling rds_send_path_reset(). Sampling the bit clear is not the same as owning it: rds_send_xmit() can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its state recheck after taking the lock is a store-buffering pattern (the resetter writes the state and reads the bit, the sender writes the bit and reads the

    Published Updated
  7. CVE-2026-98069

    High · CVSS 8.1EPSS 0.56%No fix published

    net/rds: acquire the fastpath locks in rds_conn_shutdown()

    In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire the fastpath locks in rds_conn_shutdown() rds_conn_shutdown() quiesces the transmit and receive-refill paths by waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and then runs the transport shutdown and rds_conn_path_reset(). Sampling the bits clear is not the same as owning them: the moment after the wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run concurrently with the teardown. The sender does recheck the connection state after taking the lock, but that rech

    Published Updated
  8. CVE-2026-98068

    Not ratedEPSS 0.18%No fix published

    net/rds: don't let rds_conn_shutdown() consume a concurrent drop

    In the Linux kernel, the following vulnerability has been resolved: net/rds: don't let rds_conn_shutdown() consume a concurrent drop rds_conn_shutdown() finishes by moving the path from RDS_CONN_DISCONNECTING to RDS_CONN_DOWN, and also accepts RDS_CONN_ERROR as the starting state of that final transition, so that a FIN processed in softirq context during the teardown does not derail the shutdown into a noisy error path. But consuming that RDS_CONN_ERROR also consumes the shutdown pass that came with it: rds_conn_path_drop() sets RDS_CONN_ERROR and then queues cp_down_w, and a pass that starts on a path already in RDS_CONN_DOWN is a no-op.

    Published Updated
  9. CVE-2026-98056

    High · CVSS 7.5EPSS 0.61%No fix published

    nvme: remove stale namespaces by NSID range during scan

    In the Linux kernel, the following vulnerability has been resolved: nvme: remove stale namespaces by NSID range during scan nvme_scan_ns_list() drops the stale namespaces in each gap in the reported NSID list one NSID at a time. Every iteration calls nvme_find_get_ns() to look the namespace up and removes it if it is present. The loop runs once per NSID in the gap rather than once per namespace actually present. NSIDs are 32-bit, so a target with a sparse NSID space can make a single gap spin the loop billions of times with nothing to remove. watchdog: BUG: soft lockup - CPU#4 stuck for 26s! Workqueue: nvme-wq nvme_scan_work [nvme_cor

    Published Updated
  10. CVE-2026-98030

    High · CVSS 7EPSS 0.12%No fix published

    net: dsa: bcm_sf2: bound the CFP rule dump by the caller's buffer size

    In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: bound the CFP rule dump by the caller's buffer size bcm_sf2_cfp_rule_get_all() walks the whole cfp.unique bitmap into rule_locs[] without consulting nfc->rule_cnt, which is how many entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed CFP rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it.

    Published Updated
  11. CVE-2026-98027

    High · CVSS 7EPSS 0.12%No fix published

    net: dsa: mv88e6xxx: bound the policy rule dump by the caller's buffer size

    In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: bound the policy rule dump by the caller's buffer size mv88e6xxx_get_rxnfc() uses rxnfc->rule_cnt as the write index while dumping the policy IDR, clobbering the input value before it has been looked at. That input is the number of entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed policy rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer point

    Published Updated
  12. CVE-2026-98026

    Medium · CVSS 5.8EPSS 0.17%No fix published

    net: bridge: mcast: properly convert mglist to rcu

    In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: properly convert mglist to rcu Sashiko reported a bug [1] that br_multicast_del_port_group unlists the port group not using proper rcu helper that preserves the next pointer and after that immediately frees the port group without waiting for rcu grace period. The only rcu walker of mglist is br_multicast_list_adjacent() and it turns out that function has always been buggy because mglist was never properly converted to RCU. Fix it by converting it to rcu and moving its initialization after eth_addr's. Initializing p->next can use RCU_INIT_POINTER because

    Published Updated
  13. CVE-2026-98025

    Not ratedEPSS 0.24%No fix published

    net: usb: cx82310_eth: drop URB after 0xffff reboot sentinel to prevent partial_data heap overflow

    In the Linux kernel, the following vulnerability has been resolved: net: usb: cx82310_eth: drop URB after 0xffff reboot sentinel to prevent partial_data heap overflow The 0xffff length sentinel detects a router reboot and schedules re-enabling of ethernet mode, but then falls through to the rest of the loop body. The next check is } else if (len > CX82310_MTU) { which is the else of the just-matched if -- it never fires for len == 0xffff. The MTU bound that normally caps the incomplete-packet save path is silently bypassed. With 0xffff > skb->len always true (rx_urb_size is 4096), the incomplete-packet branch saves dev->partial_len =

    Published Updated
  14. CVE-2026-98022

    Not ratedEPSS 0.18%No fix published

    net: cap tx_queue_len at S16_MAX to prevent oversized ring allocations

    In the Linux kernel, the following vulnerability has been resolved: net: cap tx_queue_len at S16_MAX to prevent oversized ring allocations Several subsystems allocate ring buffers sized by dev->tx_queue_len with no upper bound. An unprivileged user (via unshare -Urn) can set a huge tx_queue_len and exhaust global memory with ring allocations: - pfifo_fast: pfifo_fast_init() and pfifo_fast_change_tx_queue_len() allocate 3 skb_array rings of tx_queue_len entries each. - tun: tun_queue_resize() and the queue-attach path resize ptr_rings to tx_queue_len on the NETDEV_CHANGE_TX_QUEUE_LEN notifier. - tap (macvtap/ipvtap): tap_queue_resize()

    Published Updated
  15. CVE-2026-98021

    Medium · CVSS 6.8EPSS 0.18%No fix published

    net: reject oversized tx_queue_len at netlink parse time

    In the Linux kernel, the following vulnerability has been resolved: net: reject oversized tx_queue_len at netlink parse time rtnl_create_link() assigns IFLA_TXQLEN directly to dev->tx_queue_len without going through netif_change_tx_queue_len(), so a device created with "ip link add ... txqueuelen 500000" bypasses the S16_MAX cap and still triggers the oversized ring allocations in pfifo_fast, tun and tap. The veth peer nest (rtnl_nla_parse_ifinfomsg()) and the RTM_NEWLINK-on-existing-device path reach the same sinks. Enforce the cap in ifla_policy instead: IFLA_TXQLEN becomes NLA_POLICY_FULL_RANGE(NLA_U32, &txqlen_range) with txqlen_range

    Published Updated
  16. CVE-2026-98019

    High · CVSS 8.4EPSS 0.17%No fix published

    bpf: mark a NULL call argument precise

    In the Linux kernel, the following vulnerability has been resolved: bpf: mark a NULL call argument precise check_func_arg() allows bpf_register_is_null() for nullable arguments w/o marking the underlying scalar register precise. Hence a checkpoint created on such a path would prune against arbitrary scalar value. check_helper_call() enforces second parameter of the bpf_get_local_storage() to be zero, w/o marking the underlying scalar register precise. Hence a checkpoint created on such a path would prune against arbitrary scalar value. Grouping these two into one patch, as they share the same fixes tag.

    Published Updated
  17. CVE-2026-98017

    High · CVSS 7.8EPSS 0.13%No fix published

    net/sched: defer qdisc freeing after failed creation

    In the Linux kernel, the following vulnerability has been resolved: net/sched: defer qdisc freeing after failed creation An RTM_NEWQDISC request can make clsact bind a populated shared ingress block during ->init(), publishing an embedded mini_Qdisc to lockless readers. If the same request has an invalid TCA_RATE, estimator setup fails after ->init(); the unwind removes the pointer but synchronously frees its containing qdisc while tc_run() may still hold it. Retire failed qdiscs through the same RCU helper as normal destruction. Inline the synchronous free into the callback now that no direct callers remain.

    Published Updated
  18. CVE-2026-98015

    Not ratedEPSS 0.18%No fix published

    net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put

    In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put In mlx5_eswitch_termtbl_put(), the zero-ref cleanup check reads tt->ref_count after termtbl_mutex has been released. Two concurrent callers on the same mlx5_termtbl_handle race: one decrements ref_count to zero, removes the hash entry, and calls kfree(tt) while the other has already dropped the mutex and is about to evaluate if (!tt->ref_count), producing a use-after-free. Fix this by capturing the result of the decrement into a stack-local last variable before dropping the mutex. The cleanup decision is

    Published Updated
  19. CVE-2026-98011

    Not ratedEPSS 0.18%No fix published

    net/sched: hhf: clamp quantum in change and init paths

    In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: clamp quantum in change and init paths hhf_change() accepts any quantum from userspace, including 1. With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 makes the deficit-refill loop spin ~2^31 times under the qdisc lock (a soft lockup / denial of service). Add max(256U, ...) in hhf_change() matching fq_codel_change(). Clamp hhf_init() to [256, 1<<20] matching the siblings, and remove the old fallback that only set quantum=256 on overflow. Conditions to recreate the bug: CONFIG_NET_SCH_HHF=y. Requires CAP_NET_ADMIN (namespace-local via

    Published Updated
  20. CVE-2026-98010

    Not ratedEPSS 0.18%No fix published

    net/sched: drr: clamp quantum in change class

    In the Linux kernel, the following vulnerability has been resolved: net/sched: drr: clamp quantum in change class drr_change_class() rejects explicit quantum==0 but falls back to psched_mtu() with no floor. With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 (or a zero psched_mtu on a headerless device) makes the deficit-refill loop spin under the qdisc lock. Add clamp_t(u32, quantum, 256, 1<<20) after the zero reject and on the fallback path. The explicit-zero reject is preserved. Conditions to recreate the bug: CONFIG_NET_SCH_DRR=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add

    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →