p PatchFirst

PatchFirst · Latest vulnerabilities

linux-oracle-5.15 vulnerabilities · Page 135

Vulnerabilities published for linux-oracle-5.15 in the last 30 days: 647. Listed in the KEV catalogue: 0.

Filter vulnerabilities
Clear filters

Vulnerabilities: 6515

  1. CVE-2026-68137

    Critical · CVSS 9.8EPSS 0.54%Fix available

    net/x25: fix use-after-free in x25_kill_by_neigh()

    In the Linux kernel, the following vulnerability has been resolved: net/x25: fix use-after-free in x25_kill_by_neigh() x25_kill_by_neigh() walks the global X.25 socket list looking for sockets attached to a terminating neighbour. x25_list_lock protects list membership while the lookup is in progress, but it does not pin a socket's lifetime after the lock is dropped. The function currently drops x25_list_lock before calling lock_sock(s). A concurrent close can run x25_release(), remove the same socket from x25_list, and drop the last socket reference in that window. The neighbour teardown path can then lock or inspect a freed struct sock/st

    • Update to 5.15.0-1114.120~20.04.1
    Published Updated
  2. CVE-2026-68136

    Critical · CVSS 9.8EPSS 0.54%Public exploitNo fix published

    net: gro: fix double aggregation of flush-marked skbs

    In the Linux kernel, the following vulnerability has been resolved: net: gro: fix double aggregation of flush-marked skbs Commit 0ab03f353d36 ("net-gro: Fix GRO flush when receiving a GSO packet.") added a flush check to skb_gro_receive(), but skb_gro_receive_list() lacks the same validation. As a result, packets marked with NAPI_GRO_CB(skb)->flush may still be re-aggregated. This allows already-GRO'd packets with existing frag_list to be re-aggregated into a new GRO session, corrupting the frag_list chain structure. When skb_segment() attempts to unpack these malformed packets, it encounters invalid state and triggers a kernel panic. Sc

    Published Updated
  3. CVE-2026-68135

    Not ratedEPSS 0.18%Fix available

    net: hip04: fix RX buffer leak on build_skb failure

    In the Linux kernel, the following vulnerability has been resolved: net: hip04: fix RX buffer leak on build_skb failure When build_skb() fails in hip04_rx_poll(), the driver jumps to the refill path without releasing the current RX buffer and its DMA mapping. Installing a replacement buffer then overwrites the slot references and leaks both resources. Keep the current slot intact and return budget so NAPI retries the same buffer. Also free a newly allocated RX fragment when dma_map_single() fails. This issue was found by an in-house static analysis tool.

    • Update to 5.15.0-1114.120~20.04.1
    Published Updated
  4. CVE-2026-68132

    Not ratedEPSS 0.18%Fix available

    super: fix emergency thaw deadlock on frozen block devices

    In the Linux kernel, the following vulnerability has been resolved: super: fix emergency thaw deadlock on frozen block devices do_thaw_all_callback() calls bdev_thaw() while holding sb->s_umount exclusively. If the block device was frozen via bdev_freeze() dropping the last block layer freeze reference calls fs_bdev_thaw() which reacquires s_umount: do_thaw_all_callback(sb) super_lock_excl(sb) # holds sb->s_umount bdev_thaw(sb->s_bdev) mutex_lock(&bdev->bd_fsfreeze_mutex) # bd_fsfreeze_count drops 1 -> 0 bd_holder_ops->thaw == fs_bdev_thaw get_bdev_super(bdev) bdev_super_loc

    • Update to 5.15.0-1116.122~20.04.1
    Published Updated
  5. CVE-2026-68131

    High · CVSS 7.5EPSS 0.52%Fix available

    rbd: Reset positive result codes to zero in object map update path

    In the Linux kernel, the following vulnerability has been resolved: rbd: Reset positive result codes to zero in object map update path In a reply message to an RBD request, a positive result code indicates a data payload, which is not allowed for writes. While rbd_osd_req_callback() already resets a positive result code for writes to zero, rbd_object_map_callback() does not. This allows a corrupted reply to an object map update to trigger the rbd_assert(*result < 0) in __rbd_obj_handle_request(). This happens, because rbd_object_map_callback() calls rbd_obj_handle_request() -> __rbd_obj_handle_request() and passes this positive result code.

    • Update to 5.15.0-1114.120~20.04.1
    Published Updated
  6. CVE-2026-68130

    Not ratedEPSS 0.22%Fix available

    ksmbd: defer destroy_previous_session() until after NTLM authentication

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer destroy_previous_session() until after NTLM authentication In ntlm_authenticate(), destroy_previous_session() is called using a user pointer resolved from the client-supplied NTLM blob username field before the NTLMv2 response is validated. An authenticated attacker can set the NTLM blob username to match a victim account and set PreviousSessionId to the victim's session ID; destroy_previous_session() destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob() subsequently rejects the request with -EPERM. Move destroy_previous_session() and the prev_i

    • Update to 5.15.0-1116.122~20.04.1
    Published Updated
  7. CVE-2026-68129

    High · CVSS 7.5EPSS 0.51%Fix available

    gve: fix Rx queue stall on alloc failure

    In the Linux kernel, the following vulnerability has been resolved: gve: fix Rx queue stall on alloc failure When the system is under extreme memory pressure, page allocations can fail during the Rx buffer refill loop. If the number of buffers posted to hardware falls below a critical low threshold and the refill loop exits due to allocation failures, the queue can stall: 1. The device drops incoming packets because there are no descriptors. 2. Since no packets are processed, no Rx completions are generated. 3. Because no completions occur, NAPI is never scheduled, preventing the refill loop from running again even after memory is freed

    • Update to 5.15.0-1114.120~20.04.1
    Published Updated
  8. CVE-2026-68127

    Critical · CVSS 9.8EPSS 0.54%Fix available

    ila: reload IPv6 header after pskb_may_pull in checksum adjust

    In the Linux kernel, the following vulnerability has been resolved: ila: reload IPv6 header after pskb_may_pull in checksum adjust ila_csum_adjust_transport() caches ip6h = ipv6_hdr(skb) before calling pskb_may_pull(). On a non-linear skb whose transport header sits in a page fragment, pskb_may_pull() can call __pskb_pull_tail() / pskb_expand_head() and free the old skb head, leaving ip6h dangling; the following get_csum_diff(ip6h, p) then reads freed memory. ila_update_ipv6_locator() uses ip6h (and the iaddr derived from it) again after the csum-adjust call and additionally writes the new locator through that pointer. Impact: a remote IPv

    • Update to 5.15.0-1114.120~20.04.1
    Published Updated
  9. CVE-2026-68125

    High · CVSS 8.8EPSS 0.32%Fix available

    mac802154: llsec: reject frames shorter than the authentication tag

    In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: reject frames shorter than the authentication tag llsec_do_decrypt_auth() computes the associated-data length for the AEAD request as assoclen += datalen - authlen; where datalen is the number of bytes after the MAC header and authlen (4, 8 or 16) is the length of the authentication tag. Nothing verifies that the frame actually carries at least authlen payload bytes. A secured frame whose payload is shorter than the tag makes datalen - authlen negative; assoclen is then passed to aead_request_set_ad() as an unsigned value close to 4 GiB, so crypto_aead_

    • Update to 5.15.0-1114.120~20.04.1
    Published Updated
  10. CVE-2026-68123

    Critical · CVSS 9.8EPSS 0.55%Fix available

    openvswitch: fix GSO userspace truncation underflow

    In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix GSO userspace truncation underflow OVS_ACTION_ATTR_TRUNC currently stores a delta from the original skb length in OVS_CB(skb)->cutlen. When a later userspace action segments a GSO skb, queue_gso_packets() reuses that delta for each smaller segment. A segment can then reach queue_userspace_packet() with cutlen greater than skb->len, underflowing the length passed to skb_zerocopy(). Store the maximum preserved length instead and bound each consumer against the current skb length. Use U32_MAX as the no-truncation sentinel so the value remains valid if skb geo

    • Update to 5.15.0-1114.120~20.04.1
    Published Updated
  11. CVE-2026-68121

    High · CVSS 7.8EPSS 0.37%Public exploitFix available

    pppoe: reload header pointer after dev_hard_header()

    In the Linux kernel, the following vulnerability has been resolved: pppoe: reload header pointer after dev_hard_header() pppoe_sendmsg() saves a pointer to the PPPoE header before calling dev_hard_header(). Device header callbacks are allowed to reallocate the skb head, invalidating pointers into it. This can happen when a send is blocked in copy_from_user() while the first non-Ethernet port is added to an empty team device. The team's delegated GRE header callback then expands the skb head. PPPoE subsequently writes six bytes through the stale pointer into the freed head. Reload the PPPoE header through the skb's network-header offset af

    • Update to 5.15.0-1114.120~20.04.1
    Published Updated
  12. CVE-2026-68118

    High · CVSS 8.2EPSS 0.4%No fix published

    tcp: challenge ACK for non-exact RST in SYN-RECEIVED

    In the Linux kernel, the following vulnerability has been resolved: tcp: challenge ACK for non-exact RST in SYN-RECEIVED The SYN-RECEIVED request-socket path in tcp_check_req() accepts an in-window RST without requiring SEG.SEQ to exactly match RCV.NXT. A non-exact RST therefore removes the request instead of eliciting a challenge ACK. RFC 9293 section 3.10.7.4 applies the RFC 5961 reset check in SYN-RECEIVED: an exact RST resets the connection, while a non-exact in-window RST must trigger a challenge ACK and be dropped. Apply that check before the ACK-field validation, following the RFC sequence-number, RST, then ACK processing order.

    Published Updated
  13. CVE-2026-68117

    Critical · CVSS 9.8EPSS 0.53%Fix available

    tipc: clear sock->sk on the failed-insert path in tipc_sk_create()

    In the Linux kernel, the following vulnerability has been resolved: tipc: clear sock->sk on the failed-insert path in tipc_sk_create() When tipc_sk_create() fails to insert the new socket (tipc_sk_insert() returns non-zero), its error path frees the sk with sk_free() but leaves sock->sk pointing at the freed object: if (tipc_sk_insert(tsk)) { sk_free(sk); pr_warn("Socket create failed; port number exhausted\n"); return -EINVAL; } This is harmless for plain socket(): the syscall layer clears sock->ops before releasing, so tipc_release() is never called. It is not harmless on the accept() path. tipc_accept() creates the pre-allocate

    • Update to 5.15.0-1114.120~20.04.1
    Published Updated
  14. CVE-2026-68115

    Not ratedEPSS 0.18%Fix available

    drm/amdgpu/gfx10: replace BUG_ON() with WARN_ON()

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx10: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit ac6f00beb658239bced4aaed9efbb04a35348d48)

    • Update to 5.15.0-1114.120~20.04.1
    Published Updated
  15. CVE-2026-68111

    Not ratedEPSS 0.18%Fix available

    drm/amdgpu/gfx9: replace BUG_ON() with WARN_ON()

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx9: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054)

    • Update to 5.15.0-1114.120~20.04.1
    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →