p PatchFirst

PatchFirst · Latest vulnerabilities

linux-oracle vulnerabilities · Page 169

Vulnerabilities published for linux-oracle in the last 30 days: 485. Listed in the KEV catalogue: 0.

RSS ↗ JSON ↗
Filter vulnerabilities
Clear filters

Vulnerabilities: 5344

  1. CVE-2025-71091

    High · CVSS 7.8EPSS 0.14%No fix published

    team: fix check for port enabled in team_queue_override_port_prio_changed()

    In the Linux kernel, the following vulnerability has been resolved: team: fix check for port enabled in team_queue_override_port_prio_changed() There has been a syzkaller bug reported recently with the following trace: list_del corruption, ffff888058bea080->prev is LIST_POISON2 (dead000000000122) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:59! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 3 UID: 0 PID: 21246 Comm: syz.0.2928 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:__list_del_entry_valid_or_report+0x13e/

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  2. CVE-2025-71089

    High · CVSS 7.8EPSS 0.16%No fix published

    iommu: disable SVA when CONFIG_X86 is set

    In the Linux kernel, the following vulnerability has been resolved: iommu: disable SVA when CONFIG_X86 is set Patch series "Fix stale IOTLB entries for kernel address space", v7. This proposes a fix for a security vulnerability related to IOMMU Shared Virtual Addressing (SVA). In an SVA context, an IOMMU can cache kernel page table entries. When a kernel page table page is freed and reallocated for another purpose, the IOMMU might still hold stale, incorrect entries. This can be exploited to cause a use-after-free or write-after-free condition, potentially leading to privilege escalation or data corruption. This solution introduces a d

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  3. CVE-2025-71087

    Medium · CVSS 5.5EPSS 0.14%No fix published

    iavf: fix off-by-one issues in iavf_config_rss_reg()

    In the Linux kernel, the following vulnerability has been resolved: iavf: fix off-by-one issues in iavf_config_rss_reg() There are off-by-one bugs when configuring RSS hash key and lookup table, causing out-of-bounds reads to memory [1] and out-of-bounds writes to device registers. Before commit 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS"), the loop upper bounds were: i <= I40E_VFQF_{HKEY,HLUT}_MAX_INDEX which is safe since the value is the last valid index. That commit changed the bounds to: i <= adapter->rss_{key,lut}_size / 4 where `rss_{key,lut}_size / 4` is the number of dwords, so the last valid index is `(rss_{

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  4. CVE-2025-71086

    High · CVSS 7.8EPSS 0.15%No fix published

    net: rose: fix invalid array index in rose_kill_by_device()

    In the Linux kernel, the following vulnerability has been resolved: net: rose: fix invalid array index in rose_kill_by_device() rose_kill_by_device() collects sockets into a local array[] and then iterates over them to disconnect sockets bound to a device being brought down. The loop mistakenly indexes array[cnt] instead of array[i]. For cnt < ARRAY_SIZE(array), this reads an uninitialized entry; for cnt == ARRAY_SIZE(array), it is an out-of-bounds read. Either case can lead to an invalid socket pointer dereference and also leaks references taken via sock_hold(). Fix the index to use i.

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  5. CVE-2025-71085

    High · CVSS 7.5EPSS 0.3%No fix published

    ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr()

    In the Linux kernel, the following vulnerability has been resolved: ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr() There exists a kernel oops caused by a BUG_ON(nhead < 0) at net/core/skbuff.c:2232 in pskb_expand_head(). This bug is triggered as part of the calipso_skbuff_setattr() routine when skb_cow() is passed headroom > INT_MAX (i.e. (int)(skb_headroom(skb) + len_delta) < 0). The root cause of the bug is due to an implicit integer cast in __skb_cow(). The check (headroom > skb_headroom(skb)) is meant to ensure that delta = headroom - skb_headroom(skb) is never negative, otherwise we will trigger a BUG_ON in pskb

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  6. CVE-2025-71083

    Medium · CVSS 5.7EPSS 0.14%No fix published

    drm/ttm: Avoid NULL pointer deref for evicted BOs

    In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Avoid NULL pointer deref for evicted BOs It is possible for a BO to exist that is not currently associated with a resource, e.g. because it has been evicted. When devcoredump tries to read the contents of all BOs for dumping, we need to expect this as well -- in this case, ENODATA is recorded instead of the buffer contents.

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  7. CVE-2025-71082

    High · CVSS 7.8EPSS 0.14%No fix published

    Bluetooth: btusb: revert use of devm_kzalloc in btusb

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: revert use of devm_kzalloc in btusb This reverts commit 98921dbd00c4e ("Bluetooth: Use devm_kzalloc in btusb.c file"). In btusb_probe(), we use devm_kzalloc() to allocate the btusb data. This ties the lifetime of all the btusb data to the binding of a driver to one interface, INTF. In a driver that binds to other interfaces, ISOC and DIAG, this is an accident waiting to happen. The issue is revealed in btusb_disconnect(), where calling usb_driver_release_interface(&btusb_driver, data->intf) will have devm free the data that is also being used by the othe

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  8. CVE-2025-71081

    Medium · CVSS 5.5EPSS 0.13%No fix published

    ASoC: stm32: sai: fix OF node leak on probe

    In the Linux kernel, the following vulnerability has been resolved: ASoC: stm32: sai: fix OF node leak on probe The reference taken to the sync provider OF node when probing the platform device is currently only dropped if the set_sync() callback fails during DAI probe. Make sure to drop the reference on platform probe failures (e.g. probe deferral) and on driver unbind. This also avoids a potential use-after-free in case the DAI is ever reprobed without first rebinding the platform driver.

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  9. CVE-2025-71079

    Medium · CVSS 5.5EPSS 0.11%No fix published

    net: nfc: fix deadlock between nfc_unregister_device and rfkill_fop_write

    In the Linux kernel, the following vulnerability has been resolved: net: nfc: fix deadlock between nfc_unregister_device and rfkill_fop_write A deadlock can occur between nfc_unregister_device() and rfkill_fop_write() due to lock ordering inversion between device_lock and rfkill_global_mutex. The problematic lock order is: Thread A (rfkill_fop_write): rfkill_fop_write() mutex_lock(&rfkill_global_mutex) rfkill_set_block() nfc_rfkill_set_block() nfc_dev_down() device_lock(&dev->dev) <- waits for device_lock Thread B (nfc_unregister_device): nfc_unregister_device() device_lock(&dev->dev)

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  10. CVE-2025-71078

    High · CVSS 7.8EPSS 0.11%No fix published

    powerpc/64s/slb: Fix SLB multihit issue during SLB preload

    In the Linux kernel, the following vulnerability has been resolved: powerpc/64s/slb: Fix SLB multihit issue during SLB preload On systems using the hash MMU, there is a software SLB preload cache that mirrors the entries loaded into the hardware SLB buffer. This preload cache is subject to periodic eviction — typically after every 256 context switches — to remove old entry. To optimize performance, the kernel skips switch_mmu_context() in switch_mm_irqs_off() when the prev and next mm_struct are the same. However, on hash MMU systems, this can lead to inconsistencies between the hardware SLB and the software preload cache. If an SLB entry

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  11. CVE-2025-71077

    Medium · CVSS 5.5EPSS 0.15%No fix published

    tpm: Cap the number of PCR banks

    In the Linux kernel, the following vulnerability has been resolved: tpm: Cap the number of PCR banks tpm2_get_pcr_allocation() does not cap any upper limit for the number of banks. Cap the limit to eight banks so that out of bounds values coming from external I/O cause on only limited harm.

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  12. CVE-2025-71075

    High · CVSS 7.8EPSS 0.15%No fix published

    scsi: aic94xx: fix use-after-free in device removal path

    In the Linux kernel, the following vulnerability has been resolved: scsi: aic94xx: fix use-after-free in device removal path The asd_pci_remove() function fails to synchronize with pending tasklets before freeing the asd_ha structure, leading to a potential use-after-free vulnerability. When a device removal is triggered (via hot-unplug or module unload), race condition can occur. The fix adds tasklet_kill() before freeing the asd_ha structure, ensuring all scheduled tasklets complete before cleanup proceeds.

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  13. CVE-2025-71074

    High · CVSS 7.8EPSS 0.13%No fix published

    functionfs: fix the open/removal races

    In the Linux kernel, the following vulnerability has been resolved: functionfs: fix the open/removal races ffs_epfile_open() can race with removal, ending up with file->private_data pointing to freed object. There is a total count of opened files on functionfs (both ep0 and dynamic ones) and when it hits zero, dynamic files get removed. Unfortunately, that removal can happen while another thread is in ffs_epfile_open(), but has not incremented the count yet. In that case open will succeed, leaving us with UAF on any subsequent read() or write(). The root cause is that ffs->opened is misused; atomic_dec_and_test() vs. atomic_add_return() i

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  14. CVE-2025-71073

    High · CVSS 7.8EPSS 0.18%No fix published

    Input: lkkbd - disable pending work before freeing device

    In the Linux kernel, the following vulnerability has been resolved: Input: lkkbd - disable pending work before freeing device lkkbd_interrupt() schedules lk->tq via schedule_work(), and the work handler lkkbd_reinit() dereferences the lkkbd structure and its serio/input_dev fields. lkkbd_disconnect() and error paths in lkkbd_connect() free the lkkbd structure without preventing the reinit work from being queued again until serio_close() returns. This can allow the work handler to run after the structure has been freed, leading to a potential use-after-free. Use disable_work_sync() instead of cancel_work_sync() to ensure the reinit work ca

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  15. CVE-2025-71069

    Medium · CVSS 5.3EPSS 0.21%No fix published

    f2fs: invalidate dentry cache on failed whiteout creation

    In the Linux kernel, the following vulnerability has been resolved: f2fs: invalidate dentry cache on failed whiteout creation F2FS can mount filesystems with corrupted directory depth values that get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT operations are performed on such directories, f2fs_rename performs directory modifications (updating target entry and deleting source entry) before attempting to add the whiteout entry via f2fs_add_link. If f2fs_add_link fails due to the corrupted directory structure, the function returns an error to VFS, but the partial directory modifications have already been committed to disk. VFS

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  16. CVE-2025-71064

    Not ratedEPSS 0.23%No fix published

    net: hns3: using the num_tqps in the vf driver to apply for resources

    In the Linux kernel, the following vulnerability has been resolved: net: hns3: using the num_tqps in the vf driver to apply for resources Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller than hdev->num_tqps, which causes some hdev->htqp[i] to remain uninitialized in hclgevf_knic_setup(). Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps, ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent and that all elements are properly initialize

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  17. CVE-2025-68822

    High · CVSS 7.8EPSS 0.18%No fix published

    Input: alps - fix use-after-free bugs caused by dev3_register_work

    In the Linux kernel, the following vulnerability has been resolved: Input: alps - fix use-after-free bugs caused by dev3_register_work The dev3_register_work delayed work item is initialized within alps_reconnect() and scheduled upon receipt of the first bare PS/2 packet from an external PS/2 device connected to the ALPS touchpad. During device detachment, the original implementation calls flush_workqueue() in psmouse_disconnect() to ensure completion of dev3_register_work. However, the flush_workqueue() in psmouse_disconnect() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work i

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  18. CVE-2025-68819

    High · CVSS 7.8EPSS 0.15%No fix published

    media: dvb-usb: dtv5100: fix out-of-bounds in dtv5100_i2c_msg()

    In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb: dtv5100: fix out-of-bounds in dtv5100_i2c_msg() rlen value is a user-controlled value, but dtv5100_i2c_msg() does not check the size of the rlen value. Therefore, if it is set to a value larger than sizeof(st->data), an out-of-bounds vuln occurs for st->data. Therefore, we need to add proper range checking to prevent this vuln.

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  19. CVE-2025-68818

    High · CVSS 8.8EPSS 0.33%No fix published

    scsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path"

    In the Linux kernel, the following vulnerability has been resolved: scsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path" This reverts commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9. The commit being reverted added code to __qla2x00_abort_all_cmds() to call sp->done() without holding a spinlock. But unlike the older code below it, this new code failed to check sp->cmd_type and just assumed TYPE_SRB, which results in a jump to an invalid pointer in target-mode with TYPE_TGT_CMD: qla2xxx [0000:65:00.0]-d034:8: qla24xx_do_nack_work create sess success 0000000009f7a79b qla2xxx [0000:65:00.0]-5003:8: ISP System Er

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

  20. CVE-2025-68816

    High · CVSS 7EPSS 0.24%No fix published

    net/mlx5: fw_tracer, Validate format string parameters

    In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fw_tracer, Validate format string parameters Add validation for format string parameters in the firmware tracer to prevent potential security vulnerabilities and crashes from malformed format strings received from firmware. The firmware tracer receives format strings from the device firmware and uses them to format trace messages. Without proper validation, bad firmware could provide format strings with invalid format specifiers (e.g., %s, %p, %n) that could lead to crashes, or other undefined behavior. Add mlx5_tracer_validate_params() to validate that all form

    linux-oracleOperating systems
    Published Updated
    Source advisory 1 ↗Source advisory 2 ↗Source advisory 3 ↗

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →