linux-riscv-5.15 vulnerabilities · Page 185

usb: renesas_usbhs: fix use-after-free in ISR during device removal

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: fix use-after-free in ISR during device removal In usbhs_remove(), the driver frees resources (including the pipe array) while the interrupt handler (usbhs_interrupt) is still registered. If an interrupt fires after usbhs_pipe_remove() but before the driver is fully unbound, the ISR may access freed memory, causing a use-after-free. Fix this by calling devm_free_irq() before freeing resources. This ensures the interrupt handler is both disabled and synchronized (waits for any running ISR to complete) before usbhs_pipe_remove() is called.

• Update to 5.15.0-1106.110~20.04.1

usb: image: mdc800: kill download URB on timeout

In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: kill download URB on timeout mdc800_device_read() submits download_urb and waits for completion. If the timeout fires and the device has not responded, the function returns without killing the URB, leaving it active. A subsequent read() resubmits the same URB while it is still in-flight, triggering the WARN in usb_submit_urb(): "URB submitted while active" Check the return value of wait_event_timeout() and kill the URB if it indicates timeout, ensuring the URB is complete before its status is inspected or the URB is resubmitted. Similar to - commit

• Update to 5.15.0-1106.110~20.04.1

usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically managed and tied to userspace configuration via ConfigFS. It can be NULL if the USB host sends requests before the nexus is fully established or immediately after it is dropped. Currently, functions like `bot_submit_command()` and the data transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately dereference `tv_nexus->tvn_se_sess` without any validation. If a malicious or misconfigured USB host sends a BOT (Bulk-Only Transport)

usb: gadget: f_ncm: Fix net_device lifecycle with device_move

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Fix net_device lifecycle with device_move The network device outlived its parent gadget device during disconnection, resulting in dangling sysfs links and null pointer dereference problems. A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1] was reverted due to power management ordering concerns and a NO-CARRIER regression. A subsequent attempt to defer net_device allocation to bind [2] broke 1:1 mapping between function instance and network device, making it impossible for configfs to report the resolved interface name. This results

ceph: fix i_nlink underrun during async unlink

In the Linux kernel, the following vulnerability has been resolved: ceph: fix i_nlink underrun during async unlink During async unlink, we drop the `i_nlink` counter before we receive the completion (that will eventually update the `i_nlink`) because "we assume that the unlink will succeed". That is not a bad idea, but it races against deletions by other clients (or against the completion of our own unlink) and can lead to an underrun which emits a WARNING like this one: WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68 Modules linked in: CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-a

• Update to 5.15.0-1106.110~20.04.1

ceph: fix memory leaks in ceph_mdsc_build_path()

In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leaks in ceph_mdsc_build_path() Add __putname() calls to error code paths that did not free the "path" pointer obtained by __getname(). If ownership of this pointer is not passed to the caller via path_info.path, the function must free it before returning.

powerpc, perf: Check that current->mm is alive before getting user callchain

In the Linux kernel, the following vulnerability has been resolved: powerpc, perf: Check that current->mm is alive before getting user callchain It may happen that mm is already released, which leads to kernel panic. This adds the NULL check for current->mm, similarly to commit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain"). I was getting this panic when running a profiling BPF program (profile.py from bcc-tools): [26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0) [26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588 [26215.051952]

scsi: qla2xxx: Completely fix fcport double free

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Completely fix fcport double free In qla24xx_els_dcmd_iocb() sp->free is set to qla2x00_els_dcmd_sp_free(). When an error happens, this function is called by qla2x00_sp_release(), when kref_put() releases the first and the last reference. qla2x00_els_dcmd_sp_free() frees fcport by calling qla2x00_free_fcport(). Doing it one more time after kref_put() is a bad idea.

• Update to 5.15.0-1105.109~20.04.1

scsi: hisi_sas: Fix NULL pointer exception during user_scan()

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Fix NULL pointer exception during user_scan() user_scan() invokes updated sas_user_scan() for channel 0, and if successful, iteratively scans remaining channels (1 to shost->max_channel) via scsi_scan_host_selected() in commit 37c4e72b0651 ("scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans"). However, hisi_sas supports only one channel, and the current value of max_channel is 1. sas_user_scan() for channel 1 will trigger the following NULL pointer exception: [ 441.554662] Unable to handle kernel NULL pointer dereference at virtual addre

tipc: fix divide-by-zero in tipc_sk_filter_connect()

In the Linux kernel, the following vulnerability has been resolved: tipc: fix divide-by-zero in tipc_sk_filter_connect() A user can set conn_timeout to any value via setsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When a SYN is rejected with TIPC_ERR_OVERLOAD and the retry path in tipc_sk_filter_connect() executes: delay %= (tsk->conn_timeout / 4); If conn_timeout is in the range [0, 3], the integer division yields 0, and the modulo operation triggers a divide-by-zero exception, causing a kernel oops/panic. Fix this by clamping conn_timeout to a minimum of 4 at the point of use in tipc_sk_filter_connect(). Oops: divide

• Update to 5.15.0-1106.110~20.04.1

firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled

In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled When the Remote System Update (RSU) isn't enabled in the First Stage Boot Loader (FSBL), the driver encounters a NULL pointer dereference when excute svc_normal_to_secure_thread() thread, resulting in a kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ... Data abort info: ... [0000000000000008] user address but active_mm is swapper Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 79 Comm: svc_smc_

kprobes: avoid crash when rmmod/insmod after ftrace killed

In the Linux kernel, the following vulnerability has been resolved: kprobes: avoid crash when rmmod/insmod after ftrace killed After we hit ftrace is killed by some errors, the kernel crash if we remove modules in which kprobe probes. BUG: unable to handle page fault for address: fffffbfff805000d PGD 817fcc067 P4D 817fcc067 PUD 817fc8067 PMD 101555067 PTE 0 Oops: Oops: 0000 [#1] SMP KASAN PTI CPU: 4 UID: 0 PID: 2012 Comm: rmmod Tainted: G W OE Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE RIP: 0010:kprobes_module_callback+0x89/0x790 RSP: 0018:ffff88812e157d30 EFLAGS: 00010a02 RAX: 1ffffffff805000d RBX: dffffc0000000000 RCX

libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply() This patch fixes an out-of-bounds access in ceph_handle_auth_reply() that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In ceph_handle_auth_reply(), the value of the payload_len field of such a message is stored in a variable of type int. A value greater than INT_MAX leads to an integer overflow and is interpreted as a negative value. This leads to decrementing the pointer address by this value and subsequently accessing it because ceph_decode_need() only checks that the memory access does

• Update to 5.15.0-1105.109~20.04.1

libceph: prevent potential out-of-bounds reads in process_message_header()

In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in process_message_header() If the message frame is (maliciously) corrupted in a way that the length of the control segment ends up being less than the size of the message header or a different frame is made to look like a message frame, out-of-bounds reads may ensue in process_message_header(). Perform an explicit bounds check before decoding the message header.

• Update to 5.15.0-1105.109~20.04.1

libceph: Use u32 for non-negative values in ceph_monmap_decode()

In the Linux kernel, the following vulnerability has been resolved: libceph: Use u32 for non-negative values in ceph_monmap_decode() This patch fixes unnecessary implicit conversions that change signedness of blob_len and num_mon in ceph_monmap_decode(). Currently blob_len and num_mon are (signed) int variables. They are used to hold values that are always non-negative and get assigned in ceph_decode_32_safe(), which is meant to assign u32 values. Both variables are subsequently used as unsigned values, and the value of num_mon is further assigned to monmap->num_mon, which is of type u32. Therefore, both variables should be of type u32. Thi

• Update to 5.15.0-1106.110~20.04.1

staging: rtl8723bs: properly validate the data in rtw_get_ie_ex()

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: properly validate the data in rtw_get_ie_ex() Just like in commit 154828bf9559 ("staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser"), we don't trust the data in the frame so we should check the length better before acting on it

• Update to 5.15.0-1106.110~20.04.1

staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie The current code checks 'i + 5 < in_len' at the end of the if statement. However, it accesses 'in_ie[i + 5]' before that check, which can lead to an out-of-bounds read. Move the length check to the beginning of the conditional to ensure the index is within bounds before accessing the array.

• Update to 5.15.0-1106.110~20.04.1

net/tcp-md5: Fix MAC comparison to be constant-time

In the Linux kernel, the following vulnerability has been resolved: net/tcp-md5: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this.

• Update to 5.15.0-1105.109~20.04.1

batman-adv: Avoid double-rtnl_lock ELP metric worker

In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid double-rtnl_lock ELP metric worker batadv_v_elp_get_throughput() might be called when the RTNL lock is already held. This could be problematic when the work queue item is cancelled via cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case, an rtnl_lock() would cause a deadlock. To avoid this, rtnl_trylock() was used in this function to skip the retrieval of the ethtool information in case the RTNL lock was already held. But for cfg80211 interfaces, batadv_get_real_netdev() was called - which also uses rtnl_lock(). The approach for __et

• Update to 5.15.0-1106.110~20.04.1

nouveau/dpcd: return EBUSY for aux xfer if the device is asleep

In the Linux kernel, the following vulnerability has been resolved: nouveau/dpcd: return EBUSY for aux xfer if the device is asleep If we have runtime suspended, and userspace wants to use /dev/drm_dp_* then just tell it the device is busy instead of crashing in the GSP code. WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy) Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024 RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] This is a simple fix to

• Update to 5.15.0-1106.110~20.04.1