sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
In the Linux kernel, the following vulnerability has been resolved:
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
When a listening SCTP server processes a COOKIE_ECHO chunk, the cached
peer INIT chunk embedded after the cookie is parsed and its parameters
are later walked by sctp_process_init() using sctp_walk_params().
However, the chunk header length of this cached INIT chunk was not
validated against the remaining buffer in the COOKIE_ECHO payload. If
the length field is inflated, the parameter walk can run beyond the
actual received data, leading to out-of-bounds reads and potential
memory corruption during lat
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
In the Linux kernel, the following vulnerability has been resolved:
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
In mrp_pdu_parse_vecattr(), vector attribute events are encoded three
per byte and valen tracks the number of events left to process.
The parser decrements valen after processing the first and second events
from each event byte, but not after processing the third one. When valen
is exactly a multiple of three, the loop continues after the last valid
event and consumes the next byte as a new event byte, applying a
spurious event to the MRP applicant state.
Additionally, when valen is zero the parser uncondi
netlabel: validate unlabeled address and mask attribute lengths
In the Linux kernel, the following vulnerability has been resolved:
netlabel: validate unlabeled address and mask attribute lengths
netlbl_unlabel_addrinfo_get() used the address attribute length to
determine whether the attribute data could be read as an IPv4 or IPv6
address, but did not independently validate the corresponding mask
attribute length. A crafted Generic Netlink request could therefore
provide a valid IPv4/IPv6 address attribute with a shorter mask
attribute, which would later be read as a full struct in_addr or
struct in6_addr.
NLA_BINARY policy lengths are maximum lengths by default, so use
NLA_POLICY_EXACT_LEN() for the
In the Linux kernel, the following vulnerability has been resolved:
tcp: restrict SO_ATTACH_FILTER to priv users
This patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP sockets
to users with CAP_NET_ADMIN capability.
This blocks potential side-channel attack where an unprivileged application
attaches a filter to leak TCP sequence/acknowledgment numbers.
net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list
mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using
the PF's log_max_current_uc/mc_list capabilities. When querying a VF
vport with a larger configured max (via devlink), the firmware response
can overflow this buffer:
BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385
CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT
Hardware name: QEMU Standard PC (Q35
ipv6: sit: reload inner IPv6 header after GSO offloads
In the Linux kernel, the following vulnerability has been resolved:
ipv6: sit: reload inner IPv6 header after GSO offloads
ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function
entry and continues using it after iptunnel_handle_offloads().
For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone().
When the skb header is cloned, skb_header_unclone() can call
pskb_expand_head(), which may move the skb head. The pskb_expand_head()
contract requires pointers into the skb header to be reloaded after the
call.
If the later skb_realloc_headroom() branch is not taken, SIT uses the
stale iph6 pointer to read the inner hop
net: openvswitch: fix possible kfree_skb of ERR_PTR
In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix possible kfree_skb of ERR_PTR
After the patch in the "Fixes" tag, the allocation of the "reply" skb
can happen either before or after locking the ovs_mutex.
However, error cleanups still follow the classical reversed order,
assuming "reply" is allocated before locking: it is freed after unlocking.
If "reply" allocation happens after locking the mutex and it fails,
"reply" is left with an ERR_PTR, and execution jumps to the correspondent
cleanup stage which will try to free an invalid pointer.
Fix this by setting the pointer to NULL after having save
sctp: fix uninit-value in __sctp_rcv_asconf_lookup()
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix uninit-value in __sctp_rcv_asconf_lookup()
__sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF
chunk can hold the ADDIP header and a parameter header, then calls
af->from_addr_param(), which reads the full address (16 bytes for IPv6)
trusting the parameter's declared length.
An unauthenticated peer can send a truncated trailing ASCONF chunk that
declares an IPv6 address parameter but stops after the 4-byte parameter
header; reached from the no-association lookup path, from_addr_param() then
reads uninitialized bytes past the parameter.
Imp
sctp: validate embedded INIT chunk and address list lengths in cookie
In the Linux kernel, the following vulnerability has been resolved:
sctp: validate embedded INIT chunk and address list lengths in cookie
sctp_unpack_cookie() only checked that the embedded INIT chunk length
did not exceed the remaining cookie payload, but did not ensure that the
INIT chunk is large enough to contain a complete INIT header.
A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose
length field is smaller than sizeof(struct sctp_init_chunk). Later,
sctp_process_init() accesses INIT parameters unconditionally, which may
lead to out-of-bounds reads.
In addition, raw_addr_list_len is not fully validated agains
ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup()
In the Linux kernel, the following vulnerability has been resolved:
ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup()
In vti6_tnl_lookup(), when an exact match for a tunnel fails,
the code falls back to searching for wildcard tunnels:
- Tunnels matching the packet's local address, with any remote address
wildcard remote).
- Tunnels matching the packet's remote address, with any local address
(wildcard local).
However, vti6 stores all these different types of tunnels in the same
hash table (ip6n->tnls_r_l) prone to hash collisions.
The bug is that the fallback search loops in vti6_tnl_lookup() were
missing checks to ensure
In the Linux kernel, the following vulnerability has been resolved:
netfilter: revalidate bridge ports
ebt_redirect_tg() dereferences br_port_get_rcu() return without a
NULL check, causing a kernel panic when the bridge port has been
removed between the original hook invocation and an NFQUEUE
reinject.
A mere NULL check isn't sufficient, however. As sashiko review
points out userspace can not only remove the port from the bridge,
it could also place the device in a different virtual device, e.g.
macvlan.
If this happens, we must drop the packet, there is no way for us to
reinject it into the bridge path.
Switch to _upper API, we don't n
In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: avoid leaking percpu counter pointers
The native and compat get-entries paths copy the fixed rule entry header
from the kernelized rule blob to userspace before overwriting the entry's
counter fields with a sanitized counter snapshot.
On SMP kernels, entry->counters.pcnt contains the percpu allocation
address used by x_tables rule counters. A caller can provide a userspace
buffer that faults during the initial fixed-header copy after pcnt has
been copied but before the later sanitized counter copy runs. The syscall
then returns -EFAULT while leaving th
Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR
signaling packets up to the channel MTU and dispatches each command
without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer
within radio range can send a fixed-channel CID 0x0001 packet that is
larger than MTUsig and contains many L2CAP_ECHO_REQ commands before
pairing. In a real-radio stock-kernel run, one 681-byte signaling
packet containing 168 zero-length ECHO_REQ commands made the target
transmit 168 ECHO_RSP frames over about 220 ms
hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf
In the Linux kernel, the following vulnerability has been resolved:
hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf
netvsc_copy_to_send_buf() copies page buffer entries into the VMBus
send buffer using phys_to_virt() on the entry PFN. Entries for the
RNDIS header and the skb linear data come from kmalloc'd memory and
are always in the kernel direct map, but entries for skb fragments
reference page cache or user pages, which on 32-bit x86 with
CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page
phys_to_virt() returns an address outside the direct map and the
subsequent memcpy() faults on the transmit softirq path,
USB: serial: io_ti: fix heap overflow in get_manuf_info()
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in get_manuf_info()
get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the
device I2C EEPROM into a buffer allocated with kmalloc_obj(), which
is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes.
The Size field comes from the device and is only validated (in
check_i2c_image()) to make sure the descriptor fits within
TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size.
A malicious USB device can therefore set Size to any value up to 16377,
causing a heap overflow of up to 16367 bytes when plugged into a h
USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()
build_i2c_fw_hdr() allocates a fixed-size buffer of
(16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then
copies le16_to_cpu(img_header->Length) bytes into it without
validating that Length fits within the available space after the
firmware record header.
img_header->Length is a __le16 from the firmware file and can be
up to 65535. check_fw_sanity() validates the total firmware size
but not img_header->Length specifically.
Fix by rejecting images where img_header->Length exceeds the
available destinati
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: kl5kusb105: fix bulk-out buffer overflow
klsi_105_prepare_write_buffer() is called by the generic write path
with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It
stores a two-byte length header at the start of the buffer and copies
the payload from the write fifo starting at buf + KLSI_HDR_LEN, but
passes the full buffer size as the number of bytes to copy:
count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN,
size, &port->lock);
When the fifo holds at least size bytes, size bytes are copied starting
two b
RDMA/srp: bound SRP_RSP sense copy by the received length
In the Linux kernel, the following vulnerability has been resolved:
RDMA/srp: bound SRP_RSP sense copy by the received length
srp_process_rsp() copies sense data from rsp->data + resp_data_len,
where resp_data_len is the full 32-bit value supplied by the SRP target
and is never checked against the number of bytes actually received
(wc->byte_len). The copy length is bounded to SCSI_SENSE_BUFFERSIZE, so
at most 96 bytes are copied, but the source offset is not bounded.
A malicious or compromised SRP target on the InfiniBand/RoCE fabric that
the initiator has logged into can return an SRP_RSP with
SRP_RSP_FLAG_SNSVALID set and a large resp_da
vsock/vmci: fix sk_ack_backlog leak on failed handshake
In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: fix sk_ack_backlog leak on failed handshake
When vmci_transport_recv_connecting_server() returns an error,
vmci_transport_recv_listen() calls vsock_remove_pending() but never
calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented
permanently.
Repeated handshake failures (malformed packets, queue pair alloc
failure, event subscribe failure) cause sk_ack_backlog to climb
toward sk_max_ack_backlog. Once it reaches the limit the listener
permanently refuses all new connections with -ECONNREFUSED, a
silent denial of service requiring a process restart to
IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN
In the Linux kernel, the following vulnerability has been resolved:
IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN
In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done()
computes the login request payload length as wc->byte_len minus
ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int.
A remote iSER initiator can post a login Send work request carrying
fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows
and login_req_len becomes negative.
isert_rx_login_req() then reads that negative length back into a signed
int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the