drm/amd/display: Fix dangling pointer in CRTC reset function
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in CRTC reset function
amdgpu_dm_crtc_reset_state() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next]
mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug
In the Linux kernel, the following vulnerability has been resolved:
mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug
We miss a failed allocation check for pgdat->per_cpu_nodestats, which
results in a NULL deref when we offset into the per-cpu area.
Propagate -ENOMEM up the stack and leave per_cpu_nodestats pointing
at boot_nodestats so a later online can retry the allocation.
hotadd_init_pgdat() returns NULL on failure, which __try_online_node()
already maps to -ENOMEM.
On failure nothing needs to be unwound:
- the node is never marked online
- per_cpu_nodestats is left pointing at boot_nodestats
- __add_memor
dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers
Fix a race condition in AXIDMA and MCDMA irq handlers where the channel
could be incorrectly marked as idle and attempt spurious transfers when
descriptors are still being processed.
The issue occurs when:
1. Multiple descriptors are queued and active.
2. An interrupt fires after completing some descriptors.
3. xilinx_dma_complete_descriptor() moves completed descriptors to
done_list.
4. Channel is marked idle and start_transfer() is called even though
active_list still conta
dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout
Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a
condition that is never fulfilled, the CPU busy-waits for prolonged time
and the timeout triggers only with a massive delay causing a CPU stall.
This happens due to a huge underestimation of wall clock time in
poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use
timekeeping in read_poll_timeout_atomic()") changed the behavior to no
longer use ktime_get at the expense of underestimation of wall clock
time which appears to be very l
In the Linux kernel, the following vulnerability has been resolved:
hwrng: core - fix rng list on registration error
hwrng_register(rng) does the following:
1. Checks if rng has name and read methods set
2. Checks if the name already exists
3. Adds rng to global rng_list
4. May try to set rng to current_rng
If step 4 fails, it returns an error. However, it does not remove the
rng from rng_list, causing a dangling reference which can result in
use-after-free if the caller frees rng, since registration failed.
Add a list_del_init() cleanup step.
crypto: atmel-ecc - reject hardware ECDH without a public key
In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-ecc - reject hardware ECDH without a public key
The hardware ECDH path in atmel_ecdh_compute_shared_secret() uses the
private key stored in the device. However, the public key is cached only
after atmel_ecdh_set_secret() successfully generated that private key
for the current tfm.
atmel_ecdh_generate_public_key() already rejects requests when no public
key is cached. Add the same check to atmel_ecdh_compute_shared_secret()
to prevent the device from using a private key that was not generated
for the current tfm.
nvmet-rdma: fix response resource leak on queue teardown
In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: fix response resource leak on queue teardown
When an nvme target with rdma transport is removed while I/Os are in
flight, a response can be posted but its send completion is never
delivered before the connection is torn down. As a result
nvmet_rdma_send_done() and nvmet_rdma_release_rsp() are never called for
the response, and this leaks the allocated RDMA read/write context and
request SGLs.
These leaks are recreated by running blktests nvme/061 with the rdma
transport and the siw driver. Kernel kmemleak feature reports them as
follows:
unreferenced object
clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister()
In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister()
gdsc_unregister() removes the OF provider entry and tears down the
parent/subdomain wiring, but never calls pm_genpd_remove() on the
individual generic_pm_domain structures registered by gdsc_init():
void gdsc_unregister(struct gdsc_desc *desc)
{
struct device *dev = desc->dev;
size_t num = desc->num;
gdsc_pm_subdomain_remove(desc, num);
of_genpd_del_provider(dev->of_node);
}
That leaves dangling entries on the global gpd_list. After a provider
unbind/rebind cycle (deferred-probe replay during e
usb: gadget: r8a66597: avoid double free of ep0_req in probe error path
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: r8a66597: avoid double free of ep0_req in probe error path
If usb_add_gadget_udc() fails, r8a66597_probe() jumps to err_add_udc
and frees ep0_req, then falls through to clean_up2 where ep0_req is
freed again when it is non-NULL.
Remove the redundant free from err_add_udc and keep the cleanup in
clean_up2 so the request is released exactly once.
Issue found using a prototype static analysis tool
and confirmed by code review.
udf: Mark LVID buffer as uptodate before marking it dirty
In the Linux kernel, the following vulnerability has been resolved:
udf: Mark LVID buffer as uptodate before marking it dirty
When an I/O error occurs while writing the Logical Volume Integrity
Descriptor (LVID) buffer to the block device, the block layer's completion
handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the
buffer. However, the buffer still contains valid LVID data in memory. If
the filesystem is subsequently remounted read-write or synced,
`udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call
`mark_buffer_dirty()`. This triggers a spurious
`WARN_ON_ONCE(!buffer_uptodate(bh))` warning in
usb: gadget: configfs: fix out-of-bounds read of qw_sign
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: configfs: fix out-of-bounds read of qw_sign
os_desc_qw_sign_show() passes OS_STRING_QW_SIGN_LEN as the input
length to utf16s_to_utf8s(), but that argument counts UTF-16 code
units while OS_STRING_QW_SIGN_LEN (14) is the byte size of qw_sign[].
The array holds only OS_STRING_QW_SIGN_LEN / 2 (7) code units, so the
conversion reads up to 7 units (14 bytes) past the end of qw_sign[]
into the following members of struct gadget_info when the stored
signature fills the array without a NUL terminator, exposing those
bytes through the configfs attribute.
The store pat
usb: fix UAF when probe runs concurrent to dyn ID removal
In the Linux kernel, the following vulnerability has been resolved:
usb: fix UAF when probe runs concurrent to dyn ID removal
Dynamic IDs are only guaranteed to be valid when usb_dynids_lock is held,
as remove_id_store can free the node. Thus, make a copy in
usb_probe_interface. Clarify the documentation that the id parameter is
only valid during the probe.
USB serial has the same pattern, but it does not need fixing as the IDs
cannot be removed via sysfs.
RDMA/ipoib: Drain RCU callbacks during module teardown
In the Linux kernel, the following vulnerability has been resolved:
RDMA/ipoib: Drain RCU callbacks during module teardown
IPoIB reclamation completions can be signaled from inside an RCU callback.
Teardown can wake before the callback returns and unload ib_ipoib while its
code is still executing.
Client registration failure can also remove already-added devices and queue
callbacks. Wait after client and workqueue teardown.
esp: do not unref managed frag pages in esp_ssg_unref()
In the Linux kernel, the following vulnerability has been resolved:
esp: do not unref managed frag pages in esp_ssg_unref()
esp_ssg_unref() releases the page references held on the source
scatterlist after the AEAD operation completes. It calls
skb_page_unref() on every frag page for an out-of-place transform
(req->src != req->dst), and in the error path of esp_output_tail()
(already_unref == true) on the request's own scatterlist.
This is wrong when the skb carries managed frags
(SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf
and the skb does not hold a per-frag page reference; io_uring SEND_ZC
with a registered bu
RDMA/rvt: Return NULL after port allocation failure
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rvt: Return NULL after port allocation failure
rvt_alloc_device() deallocates the IB device when its port array cannot
be allocated but then returns the pointer to the released allocation.
Callers treat any non-NULL value as valid and dereference it, resulting
in a use-after-free.
Return NULL immediately after deallocation so callers can propagate the
allocation failure.
fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()
In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()
A struct rdtgroup is reference counted via rdtgroup::waitcount. Callers that
need the structure to remain valid across a sleep (while waiting on acquiring
rdtgroup_mutex) take a reference with rdtgroup_kn_get() and release it with
rdtgroup_kn_put().
The release path is intended to serve as the fallback freer: if the count
drops to zero and the group has already been marked RDT_DELETED,
rdtgroup_kn_put() frees the structure.
The bulk teardown paths free_all_child_rdtgrp() and rmdir_all_sub() resulting
from a resctrl d
fs/resctrl: Fix UAF from worker threads when domains are removed
In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix UAF from worker threads when domains are removed
The mbm_handle_overflow() and cqm_handle_limbo() workers read event counters
and may sleep while doing so. They are scheduled via delayed_work embedded in
struct rdt_l3_mon_domain. Architecture allocates and frees these domains from
CPU hotplug callbacks under cpus_write_lock(), and the workers acquire
cpus_read_lock() to keep the domain alive across their access.
A use-after-free can occur when a worker is blocked waiting for
cpus_read_lock() while the hotplug core holds cpus_write_lock(): the
architecture f
hfsplus: validate thread record before delete key rebuild
In the Linux kernel, the following vulnerability has been resolved:
hfsplus: validate thread record before delete key rebuild
hfsplus_delete_cat() is called with str == NULL when the last open
reference to an unlinked HFS+ hardlink backing inode is closed. In that
case, the function finds the catalog thread by CNID and rebuilds the
catalog key from thread.nodeName.
That reconstruction path reads thread.nodeName.length directly from the
catalog B-tree into fd.search_key and then copies length * 2 bytes into
fd.search_key->cat.name.unicode. It does not first check that the found
record is a thread record or that its size matches the thread n
irqchip/renesas-irqc: Fix generic interrupt chip leak on remove
In the Linux kernel, the following vulnerability has been resolved:
irqchip/renesas-irqc: Fix generic interrupt chip leak on remove
The driver allocates domain generic chips probe. However, on driver
removal, the generic chips are not automatically freed when the interrupt
domain is removed because the domain flags do not include
IRQ_DOMAIN_FLAG_DESTROY_GC.
This causes both the domain generic chips structure and the associated
generic chips to be leaked. Additionally, the generic chips remain on the
global list and may later be accessed by generic interrupt chip suspend,
resume, or shutdown callbacks after the driver has been removed,
pote
gpu: host1x: Avoid stack over-read in debug output helpers
In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Avoid stack over-read in debug output helpers
host1x_debug_output() and host1x_debug_cont() used vsnprintf(), which
returns the length the formatted string would have reached with an
unbounded buffer. That return value was passed straight to o->fn as
the number of bytes to emit.
This could cause a read past end of the output buffer if a call to
host1x_debug_* produced a string longer than 256 bytes. This only
affected the debugfs files as the printk debug sink ignores the
number of bytes. In practice, this is very unlikely to occur.
Fix by switching to vscnpr