gpio: pch: use raw_spinlock_t for the register lock
In the Linux kernel, the following vulnerability has been resolved:
gpio: pch: use raw_spinlock_t for the register lock
pch_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
This was confirmed on a PREEMPT_RT kernel with lockdep
(PROVE_RAW_LOCK_NESTING and DEBUG_ATOMIC_SLE
In the Linux kernel, the following vulnerability has been resolved:
s390/qeth: Check CAP_NET_ADMIN for private ioctls
Gate the SIOCDEVPRIVATE ioctl commands SIOC_QETH_ADP_SET_SNMP_CONTROL,
SIOC_QETH_GET_CARD_TYPE and SIOC_QETH_QUERY_OAT with CAP_NET_ADMIN
capable check to ensure unprivileged users cannot invoke them.
net: openvswitch: fix potential UAF on meter attach failure
In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix potential UAF on meter attach failure
While attaching a newly created meter attach_meter() function makes
the new meter visible to other CPUs but can still fail afterwards.
On failure, it detaches the meter back and returns an error.
However, this is an unexpected behavior for the ovs_meter_cmd_set()
that uses a plain kfree(meter) on attach failure without waiting for
RCU readers to stop using it, assuming it was never visible.
This is never a problem for ovs-vswitchd as it always creates meters
before creating any flows that use them. But the UAF c
net: openvswitch: fix skb leak on flow key update failure during ct
In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix skb leak on flow key update failure during ct
ovs_ct_execute() always steals or frees the skb on failure while
ovs_flow_key_update() does not. So, if it fails and we return right
away, the skb ends up leaked.
Fix that by breaking instead and letting the common error handling
code at the bottom of the loop to free the skb properly.
This is a very unlikely scenario as it requires the packet to become
unparseable by applying a set of actions on a previously parseable skb,
but should be fixed nevertheless.
Reported by Sashiko.
i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock
In the Linux kernel, the following vulnerability has been resolved:
i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock
Fix a severe AB/BA deadlock between the Common Clock Framework (CCF)
and the I2C adapter lock, which triggers when an I2C-controlled clock
generator client (like the Si5351) is registered or modified under the CCF.
During an i2c client clock (generator) frequency change, the CCF acquires its global
'prepare_lock' mutex and the driver calls i2c_transfer() to update the client's
chip registers, stalling for the adapter's I2C bus lock.
Concurrently, an independent, parallel transfer on the same
i2c: imx: Cancel hrtimer before clearing slave pointer
In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: Cancel hrtimer before clearing slave pointer
In i2c_imx_unreg_slave(), the slave pointer is set to NULL after
disabling interrupts. However, a pending interrupt might already
have started the hrtimer (i2c_imx_slave_timeout) before the pointer
was cleared. If the hrtimer fires after i2c_imx->slave is set to
NULL, the timer callback i2c_imx_slave_finish_op() will call
i2c_imx_slave_event() with a NULL slave pointer, which results in a
use-after-free / NULL pointer dereference.
Fix by canceling the hrtimer and waiting for it to complete after
disabling interrupts,
In the Linux kernel, the following vulnerability has been resolved:
can: ems_usb: validate CPC message lengths
ems_usb_read_bulk_callback() walks CPC messages packed in one USB
receive buffer.
Check that each declared message fits in the URB payload. Also require the
type-specific payload to cover the fields used by the CAN, state, error and
overrun handlers.
can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents
In the Linux kernel, the following vulnerability has been resolved:
can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents
The wait and bulk receive paths walk variable-length commands from a
USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be
dispatched, and the wait path copies a matching command into a fixed
caller-owned struct kvaser_cmd using the device-provided length.
Reject nonzero commands that do not contain the fixed header or that
extend beyond the current USB buffer item. In the wait path, also reject
a matching command that exceeds the destination before copying it.
can: peak_usb: add bounds check for USB channel index
In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: add bounds check for USB channel index
The channel control index ctrl_idx is derived from rx->len which comes
directly from a device USB payload. The mask 0x0f allows values 0-15, but
the array size of usb_if->dev[] is only 2. Values 2-15 cause heap
out-of-bounds read, eventually causing kernel panic in the IRQ context.
Add bounds checking for ctrl_idx before the array access in both
pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error().
can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error
In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error
In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc()
and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also
frees the transfer buffer.
If usb_submit_urb() fails, the error path frees the buffer explicitly with
kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set,
usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double
free of the transfer buffer.
BUG: KASAN: double-free in usb_free_urb.part.0+0
can: peak_usb: validate uCAN receive record lengths
In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: validate uCAN receive record lengths
pcan_usb_fd_decode_buf() walks uCAN records packed in one USB
receive buffer.
Require each record to contain the fixed header for its type, and verify
CAN payload bytes before copying them into the skb.
drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size
vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB
binner BO, but writes the size of the whole BO to BPOS. On every binner
out-of-memory event the PTB is therefore authorized to write tile lists
across all the other slots (which may hold the tile state, tile alloc and
overflow memory of in-flight jobs) and, for any slot but the first, past
the end of the binner BO into unrelated CMA memory.
Since CMA pages are recycled into page cache and user allocations, this
is arbitrary memory co
drm/vc4: Zero the tile state data array before each BIN job
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Zero the tile state data array before each BIN job
The binner BO is a single 16MB buffer split into 512KB slots that are
handed out to jobs at submission time and recycled as jobs complete,
without ever being cleared. Each slot holds the job's Tile State Data
Array (TSDA) at its start, followed by the tile allocation pool.
While the tile allocation pool is only walked by the render thread
through branches the binner generated during the current job, the
TSDA is the PTB's own per-tile bookkeeping and is consumed by the
hardware itself. Although the kernel sets the
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: fix pptable use-after-free
amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
A concurrent pp_table write can replace and free the allocation during the
copy, causing a use-after-free.
Change the DPM interface to copy into caller-provided storage while the mutex
is held. Keep the size-only query for attribute discovery without exposing
the driver-owned pointer.
(cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631)
drm/vmwgfx: reject DX_BIND_QUERY without a DX context
In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: reject DX_BIND_QUERY without a DX context
vmw_cmd_dx_bind_query() unconditionally dereferences
sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer
dereference from any render-node fd by submitting an execbuf with
dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY
opcode in the command stream: dx_ctx_node is left NULL and the kernel
oopses on the assignment. The same NULL is then re-read in
vmw_resources_reserve() via vmw_context_get_dx_query_mob().
All sibling DX handlers fail-close on a missing dx_ctx_node using
VMW_GET_CTX
drm/vmwgfx: validate DRAW_PRIMITIVES header size before division
In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate DRAW_PRIMITIVES header size before division
vmw_cmd_draw() computes
maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl);
where header->size is u32 and is taken straight from the user-supplied
command stream. When header->size is less than sizeof(cmd->body) the
unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum.
Any user-controlled cmd->body.numVertexDecls then passes the bound and
the loop dereferences decl[i] far past the end of the kernel command
bounce buffer, producing an out-of-bounds read of kernel memory.
Reject unde
drm/vmwgfx: bound DMA command body size against suffix pointer
In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: bound DMA command body size against suffix pointer
vmw_cmd_dma() locates the DMA suffix at
(unsigned long) &cmd->body + header->size - sizeof(*suffix)
without checking that header->size is large enough to contain both
cmd->body and the suffix. An undersized header makes the suffix
pointer underflow back into the previous command in the bounce
buffer. The verifier later writes suffix->maximumOffset, clobbering
verified fields of an already-relocated earlier command -- a TOCTOU
on the device-visible command stream that lets one command rewrite
another's GMR i
usb: typec: ucsi: Fix race condition and ordering in port unregistration
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Fix race condition and ordering in port unregistration
A synchronization issue exists during port unregistration where pending
partner work items can race against workqueue destruction, leading to
use-after-free conditions:
cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__queue_work+0x83/0x4a0
Call Trace:
<IRQ>
__cfi_delayed_work_timer_fn+0x10/0x10
run_timer_softirq+0x3b6/0xbd0
sched_clock_cpu+0xc/0x110
irq_exit_rcu+0x18d/0x330
fr
crypto: sun4i-ss - Remove insecure and unused rng_alg
In the Linux kernel, the following vulnerability has been resolved:
crypto: sun4i-ss - Remove insecure and unused rng_alg
Remove sun4i_ss_rng, as it is insecure and unused:
- It has multiple vulnerabilities. sun4i_ss_prng_seed() is missing
locking and has a buffer overflow. sun4i_ss_prng_generate() fails to
fill the entire buffer with cryptographic random bytes, because it
rounds the destination length down and also doesn't actually wait for
the hardware to be ready before pulling bytes from it.
- No user of this code is known. It's usable only theoretically via the
"rng" algorithm type of AF_ALG. But userspace actually just
rxrpc: serialize kernel accept preallocation with socket teardown
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: serialize kernel accept preallocation with socket teardown
rxrpc_kernel_charge_accept() reads rx->backlog without any
socket/backlog synchronization and passes that raw pointer into
rxrpc_service_prealloc_one(). A concurrent rxrpc_discard_prealloc()
sets rx->backlog = NULL and frees the backlog rings, so a kernel
preallocation worker can keep using a freed struct rxrpc_backlog
while updating *_backlog_head/tail and array slots.
Serialize the state check and backlog lookup with the socket lock,
and reject kernel preallocation once teardown has disabled
listening or d