btrfs: fix extent map leak in NOCOW direct I/O write
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix extent map leak in NOCOW direct I/O write
btrfs_dio_iomap_begin() calls btrfs_get_extent(), which returns an
extent map reference that must be dropped on all exit paths.
For direct writes into a NOCOW range, btrfs_get_blocks_direct_write()
keeps using that extent map and asks btrfs_create_dio_extent() to
allocate the ordered extent. If that fails, for example because
btrfs_alloc_ordered_extent() fails, the function returns the error
without dropping the input extent map. The PREALLOC path avoided this by
dropping the input extent map before replacing it with the
audit: avoid dropping live tree ref on fsnotify rule autoremove
In the Linux kernel, the following vulnerability has been resolved:
audit: avoid dropping live tree ref on fsnotify rule autoremove
audit_del_rule() is used for both netlink deletion templates and internal
fsnotify autoremove. The former passes a parsed template which owns a
temporary tree reference; the latter passes the installed entry itself.
The unconditional audit_put_tree() at the end of audit_del_rule() assumes
the template case. For mixed AUDIT_DIR plus AUDIT_EXE rules, an fsnotify
autoremove event therefore drops the installed rule's live tree reference.
Repeating this across rules sharing the same tree can free the tree while
a
cifs: call pagecache_isize_extended() in cifs_setsize() when extending
In the Linux kernel, the following vulnerability has been resolved:
cifs: call pagecache_isize_extended() in cifs_setsize() when extending
cifs_setsize() calls truncate_pagecache() but skips
pagecache_isize_extended() on extension. truncate_setsize() shows
the correct pattern:
i_size_write(inode, newsize);
if (newsize > oldsize)
pagecache_isize_extended(inode, oldsize, newsize);
truncate_pagecache(inode, newsize);
pagecache_isize_extended() zeroes the tail of the page straddling old
EOF. Without it, dirty bytes in that region can be written back to
the server, exposing stale data in the newly extended range.
cifs: fix loff_t underflow in cifs_remap_file_range() when len == 0
In the Linux kernel, the following vulnerability has been resolved:
cifs: fix loff_t underflow in cifs_remap_file_range() when len == 0
With len == 0 (clone to EOF), the effective length is computed as:
len = src_inode->i_size - off;
If off > i_size, this is a negative loff_t, corrupting the ByteCount
in the FSCTL_DUPLICATE_EXTENTS_TO_FILE request and inverting the range
in filemap_write_and_wait_range(). The existing off >= i_size check
fires only after the ioctl has already been sent.
Snapshot i_size_read() once for both the bounds check and the length
calculation, eliminating the TOCTOU and 32-bit torn-read risk. Reject
off > sr
smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions
In the Linux kernel, the following vulnerability has been resolved:
smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions
When a file has the setuid or setgid bit set and is written to, the VFS
strips those bits and issues a setattr with ATTR_KILL_SUID/ATTR_KILL_SGID
together with an ATTR_MODE carrying the already-cleared mode.
Both cifs_setattr_unix() and cifs_setattr_nounix() unconditionally dropped
ATTR_MODE in that case:
/* skip mode change if it's just for clearing setuid/setgid */
if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID))
attrs->ia_valid &= ~ATTR_MODE;
This is fine for the default
smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2
When a valid primary TRANSACT2 response has been received (mid->resp_buf
set, mid->multiRsp true) and a subsequent secondary response causes
cifs_check_trans2() to return false -- either because the SMB header is
invalid (malformed != 0) or because check2ndT2() rejects the PDU --
handle_mid() overwrites mid->resp_buf with the new buffer (leaking the
primary buffer) and, because mid->multiRsp is set, skips the
server->smallbuf/bigbuf NULL-out. When the user thread frees
mid->resp_buf, ser
In the Linux kernel, the following vulnerability has been resolved:
smb: client: clear ce->tgthint in free_tgts()
When free_tgts() frees all structures in ce->tlist, ce->tgthint
is left pointing to one of the freed cache_dfs_tgt structures.
If ce->tgthint is not reset before it is used later, it results
in a use-after-free.
Set ce->tgthint to NULL in free_tgts() after the elements are
freed to reflect that no elements remain.
Critical · CVSS 9.8EPSS 0.55%Public exploitNo fix published
smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2()
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2()
coalesce_t2() computes data pointers directly from server-supplied
DataOffset fields with no validation against buffer bounds:
data_area_of_tgt = (char *)&pSMBt->hdr.Protocol +
get_unaligned_le16(&pSMBt->t2_rsp.DataOffset);
data_area_of_src = (char *)&pSMBs->hdr.Protocol +
get_unaligned_le16(&pSMBs->t2_rsp.DataOffset);
data_area_of_tgt += total_in_tgt;
...
memcpy(data_area_of_tgt, data_area_of_src, total_in_src);
A small DataOffset can push a po
smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr()
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr()
reparse_buf_ptr() reads buf->ReparseDataLength before checking that
count covers the full fixed header:
buf = (struct reparse_data_buffer *)((u8 *)io + off);
len = sizeof(*buf); /* 8 bytes */
rdlen = le16_to_cpu(buf->ReparseDataLength); /* offset 4, 2 bytes */
if (count < len || count < rdlen + len) /* check comes after */
struct reparse_data_buffer has ReparseDataLength at offset 4. If a
server returns OutputCount < 6, the read at offset 4-5 reaches
smb: client: reject a tree connect response whose byte count is too small
In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject a tree connect response whose byte count is too small
CIFSTCon() bounds its strnlen() over the byte area with the server's
ByteCount minus two, which for ByteCount 0 or 1 goes negative as an int
and converts to a huge size_t. The later subtraction wraps the __u16
bytes_left, and that is what bounds cifs_strndup_from_utf16(): a bound of
up to 65535 against a ~16 KB cifs_req_poolp object runs off the end of the
slab object, and the bytes reach userspace through tcon->nativeFileSystem
in /proc/fs/cifs/DebugData.
Reject a byte area too small for what the p
HID: picolcd: clamp eeprom debugfs read to bytes actually received
In the Linux kernel, the following vulnerability has been resolved:
HID: picolcd: clamp eeprom debugfs read to bytes actually received
picolcd_debug_eeprom_read() trusts resp->raw_data[2] -- a length byte
supplied by the device in its REPORT_EE_DATA reply -- clamped only to
the caller's read() count:
ret = resp->raw_data[2];
if (ret > s)
ret = s;
if (copy_to_user(u, resp->raw_data+3, ret))
It never checks resp->raw_size, the number of bytes picolcd_raw_event()
actually copied into the 64-byte raw_data[] of the kmalloc'd struct
picolcd_pending. A device (or a spoofed picoLCD) returning a length byte
of 0xff, read with a count >= 255,
HID: roccat: free buffered reports when destroying device
In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: free buffered reports when destroying device
roccat_report_event() duplicates each report with kmemdup() and stores
the allocation in a circular-buffer slot. The allocation is released only
when that slot is reused.
The device destruction paths free struct roccat_device without releasing
reports still stored in cbuf[]. This makes those allocations unreachable
and leaks up to ROCCAT_CBUF_SIZE report buffers per device.
Add a small destructor that frees every buffered report before freeing the
device, and use it in both paths that can destroy a registered devic
HID: sensor: custom: Fix field sysfs group cleanup on failure
In the Linux kernel, the following vulnerability has been resolved:
HID: sensor: custom: Fix field sysfs group cleanup on failure
hid_sensor_custom_add_attributes() creates one sysfs group for each
custom sensor field. If sysfs_create_group() fails after some groups
have already been created, the function returns the error without
removing the previously created groups.
Add a local unwind path to remove the groups that were already created.
With enable_sensor exposed only after the field attributes are ready,
this path can free sensor_inst->fields without leaving enable_sensor
able to access pointers into that array.
HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind
In the Linux kernel, the following vulnerability has been resolved:
HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind
For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer:
ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB
completion ghl_magic_poke_cb() re-arms the timer with mod_timer().
sony_remove() drained the timer with timer_delete_sync() and then freed
the URB with usb_free_urb():
timer_delete_sync(&sc->ghl_poke_timer);
usb_free_urb(sc->ghl_urb);
timer_delete_sync() does not block re-arming, and while the URB is in
flight the timer is not pending, so the sync delete is a no-op.
In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: stop device IO before hid_hw_stop
Quiesce device IO at the start of the devm cleanup callback
mcp2221_hid_unregister() so that incoming HID reports cannot race with
hardware teardown during probe failure or device removal, addressing a
potential use-after-free.
Guard the call to hid_device_io_stop() with io_started. On normal
removal hid_device_remove() has already cleared io_started before the
devres group is released, so an unconditional call would otherwise hit
the !io_started path and emit a spurious "io already stopped" warning
on every removal. The guar
HID: mcp2221: clear rxbuf after I2C/SMBus transfer completes
In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: clear rxbuf after I2C/SMBus transfer completes
mcp_i2c_smbus_read() stores the caller-supplied buffer pointer in
mcp->rxbuf for the duration of a transfer but never clears it when the
transfer finishes or times out. Once the caller frees or reuses the
buffer, mcp->rxbuf becomes a dangling pointer. A delayed or spurious
MCP2221_I2C_GET_DATA report can then drive mcp2221_raw_event() to
memcpy device data into the freed memory, causing a write
use-after-free.
Route all return paths through a single exit point that clears
mcp->rxbuf and mcp->rxbuf_size, so that t
HID: mcp2221: validate report size in mcp2221_raw_event()
In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: validate report size in mcp2221_raw_event()
mcp2221_raw_event() never validates the size of incoming HID reports.
In the MCP2221_I2C_GET_DATA path it trusts the device-supplied data[3]
as the copy length without checking that 4 + data[3] bytes actually
exist in the received report. A malicious or misbehaving USB device can
send a short report with a large data[3], causing the memcpy to read
past the valid report data in the HID transfer buffer and leak
uninitialized kernel memory back to userspace through the I2C/SMBus
read path.
Add a minimum size check at e
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate dirty page table on log replay
Each DIR_PAGE_ENTRY ends in a page_lcns[] array whose length is the on-disk
lcns_follow field. check_rstbl() validates the table bookkeeping but never
checks that this array fits in the entry, so a crafted lcns_follow lets the
v0->v1 conversion memmove and later replay passes run off the entry.
Add check_dp_table() to reject, right after check_rstbl(), any entry larger
than its size claims via struct_size() (the same expression used to allocate
these entries, so the check is overflow-safe by construction). All consumers
can
fs/ntfs3: fix info-leak on partial LZNT decompress in ni_read_frame()
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix info-leak on partial LZNT decompress in ni_read_frame()
ni_read_frame() decompresses an LZNT $DATA frame into the vmapped target
pages and then trusts decompress_lznt()'s return value:
unc_size = decompress_lznt(frame_ondisk, ondisk_size, frame_mem,
frame_size);
if ((ssize_t)unc_size < 0) err = unc_size;
else if (!unc_size || unc_size > frame_size) err = -EINVAL;
decompress_lznt() stops as soon as the compressed stream is exhausted
(e.g. a zero chunk header) and returns the number of bytes it actually
wrote, which m
fs/ntfs3: bound page_lcns[] index by the log record
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: bound page_lcns[] index by the log record
The copy_lcns loop and the redo shorten loop index page_lcns[] at j + i,
where i runs up to the log record's lcns_follow. That count is checked only
against the record's own length, not the target entry, so check_dp_table()
(which validates the entry's lcns_follow) does not cover it: the copy_lcns
entry may even be freshly allocated after that check, and find_dp() bounds j
but not i. A crafted record thus overflows page_lcns[] of an otherwise valid
entry.
Add dp_range_ok() and reject, before each loop, any record whose ru