scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path
qla2x00_status_entry() filters out non-TYPE_SRB entries and the
SRB_NVME_CMD, SRB_BIDI_CMD and SRB_TM_CMD types, then falls through to a
SCSI fast path that assumes the command is an SRB_SCSI_CMD. The first
thing on that path, qla_chk_edif_rx_sa_delete_pending(), and the
subsequent handling both evaluate GET_CMD_SP(sp), i.e. sp->u.scmd.cmd.
The srb u union overlays the SCSI command pointer with other command
layouts (bsg_job, iocb_cmd). If firmware delivers an unexpected
STATUS_TYPE IOCB for a non-SCSI handle, sp-
scsi: qla2xxx: Quiesce response IRQ before freeing request queue
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Quiesce response IRQ before freeing request queue
qla2xxx_delete_qpair() deletes the request queue before the response
queue. qla25xx_delete_req_que() frees the request queue memory
(kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is
only released later, in qla25xx_free_rsp_que(). In that window the
response interrupt can still fire, qla2xxx_msix_rsp_q() queues
qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue()
dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the
status path), a use-after-free.
The cancel
scsi: qla2xxx: Avoid double completion in async IOCB timeout
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Avoid double completion in async IOCB timeout
qla2x00_async_iocb_timeout() tries to abort a timed-out async IOCB. When
qla24xx_async_abort_cmd() fails, both the SRB_LOGIN_CMD path and the
SRB_CTRL_VP/default path scan outstanding_cmds[] for the SRB and then
call sp->done(sp, QLA_FUNCTION_TIMEOUT) unconditionally, without checking
whether the SRB was actually found and removed.
If the response ISR completes the same handle first, it removes the SRB
under qp_lock_ptr and runs sp->done() -> complete(sp->comp). The
submitter qla24xx_control_vp() wakes from wait_
scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read
In qla2x00_status_entry(), the FWI2 status path advances sense_data and
shrinks par_sense_len by rsp_info_len:
if (IS_FWI2_CAPABLE(ha)) {
sense_data += rsp_info_len;
par_sense_len -= rsp_info_len;
}
rsp_info_len is a 32-bit value taken directly from the target's FCP
response (sf.rsp_data_len), while par_sense_len is the IOCB data area
size (28 bytes for 24xx, 60 bytes for 29xx). A hostile or buggy target
reporting an rsp_info_len larger than par_sense_len makes the unsigned
subtraction underflow to a hug
scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry()
qla2x00_error_entry() reads ha->req_q_map[que] twice: once for the NULL
check and again when assigning it to req. The map slot is cleared by
qla25xx_free_req_que() (ha->req_q_map[que_id] = NULL under mq_lock)
during queue teardown, while the response-queue interrupt that drives
qla2x00_error_entry() is still registered (the IRQ is released later in
qla25xx_free_rsp_que()). If the slot is set to NULL between the two
reads, req becomes NULL and is dereferenced.
Read the slot once into req and NULL-check the
scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak
Several bsg handlers stage their request/reply in an uninitialized 256-byte
on-stack buffer (uint8_t bsg[DMA_POOL_SIZE]) and fill it via
sg_copy_to_buffer(), which only copies as many bytes as the user-supplied
request payload. When the request is shorter than the structure, the
remainder of the buffer is left holding stale stack data.
qla2x00_read_fru_status() and qla2x00_read_i2c() then copy the full
structure back to the reply payload with sg_copy_from_buffer(), leaking the
uninitialized stack bytes to user s
In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate MOVE_RANGE destination size
F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end
before updating i_size. A source hole can expose this: __clone_blkaddrs()
skips NULL_ADDR entries and returns success, so the caller can still extend
the destination inode with unchecked pos_out + len.
Reject destination overflow and use inode_newsize_ok() before extending
the destination inode.
f2fs: limit recovery filename logging to stored length
In the Linux kernel, the following vulnerability has been resolved:
f2fs: limit recovery filename logging to stored length
F2FS stores recovery filenames as a length plus a fixed-size i_name
buffer. The buffer is not NUL-terminated, but recover_inode() and
recover_dentry() print it with %s.
For a 255-byte filename, recovery logging can read past i_name into the
following raw inode fields.
Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN.
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix dentry folio leak in find_in_level
find_in_level() gets a dentry folio with f2fs_find_data_folio() before
calling find_in_block(). If find_in_block() returns an error, the
function stores the error in res_folio and breaks out of the loop without
dropping the dentry folio.
This leaks the folio reference on the find_in_block() error path. Drop
the dentry folio before returning the error to the caller.
f2fs: avoid NULL checkpoint thread access in sysfs
In the Linux kernel, the following vulnerability has been resolved:
f2fs: avoid NULL checkpoint thread access in sysfs
checkpoint_merge can be enabled even when no checkpoint merge thread is
running. A read-only mount is one case: f2fs does not start
f2fs_issue_ckpt there, but ckpt_thread_ioprio is still writable through
sysfs.
The ckpt_thread_ioprio store path updates the saved ioprio value and,
when checkpoint_merge is enabled, calls set_task_ioprio() for the
checkpoint thread. If cprc->f2fs_issue_ckpt is NULL, that dereferences a
NULL task pointer.
Protect ckpt_thread_ioprio sysfs writes with s_umount as well, so the
checkpoint thread
f2fs: fix to migrate all curseg types during free_segment_range
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to migrate all curseg types during free_segment_range
In free_segment_range(), the curseg evacuation loop only iterates up to
NR_CURSEG_PERSIST_TYPE (0..5), missing non-persistent in-memory curseg
types such as CURSEG_COLD_DATA_PINNED and CURSEG_ALL_DATA_ATGC.
Even though these in-memory curseg types are not saved in the on-disk
checkpoint header, they still occupy active physical segments at runtime.
If an active in-memory curseg happens to be allocated within the segment
range being truncated during filesystem shrink, failing to evacuate it
will cause subsequen
f2fs: fix to avoid potential deadloop in f2fs_fsync_node_pages()
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid potential deadloop in f2fs_fsync_node_pages()
There is potential deadloop in race condition:
Thread A Thread B
- fsync
- f2fs_do_sync_file
- f2fs_fsync_node_pages
- last_fsync_dnode
- folio_get(last_folio)
- f2fs_setattr
- f2fs_truncate
- f2fs_truncate_blocks
- f2fs_do_truncate_blocks
- f2fs_truncate_inode_blocks
- truncate_dnode
- truncate_node
- invalidate_mapping_pages
- folio->mapping = NULL
- is_node_folio alwasy return false
- atomic && !marked is al
f2fs: fix to clear dirty flag on folio in error path
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to clear dirty flag on folio in error path
If node block is corrupted due to chksum mismatch or inconsistent
footer info, it needs to drop clear flag of node folio, in order
to persist inconsistent node data to storage.
drm/panel-edp: fix i2c adapter leak on probe failure
In the Linux kernel, the following vulnerability has been resolved:
drm/panel-edp: fix i2c adapter leak on probe failure
Make sure to drop the i2c adapter reference on probe failure (e.g.
probe deferral) and on driver unbind also if a devicetree redundantly
uses the 'ddc-i2c-bus' property to point to the aux ddc bus.
drm: fix race between partial drm_dev_register() failure and ioctl
In the Linux kernel, the following vulnerability has been resolved:
drm: fix race between partial drm_dev_register() failure and ioctl
If drm_dev_register() fails after registering a minor (e.g. render minor
registered, primary minor fails), userspace could have opened the first
minor and entered a drm_dev_enter() critical section. Since the
unplugged flag was never set, the ioctl proceeds while the error path
tears down device resources.
Fix this by introducing drm_dev_synchronize_unplug(), which sets the
unplugged flag and waits for the SRCU barrier, ensuring all in-flight
drm_dev_enter() critical sections complete before cleanup proceed
drm/i915: Guard against NULL driver_data in i915_pci_probe()
In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Guard against NULL driver_data in i915_pci_probe()
pci_match_device() can return the dummy pci_device_id_any entry
when a device is force-bound via sysfs driver_override, in which
case ->driver_data is unset (NULL). i915_pci_probe() casts it to
struct intel_device_info * unconditionally and dereferences
intel_info->require_force_probe, causing a NULL-ptr-deref.
(cherry picked from commit 2727922084672cc274ecea726ea00363c2893731)
drm/amd/display: avoid divide-by-zero in __is_lut_linear()
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: avoid divide-by-zero in __is_lut_linear()
__is_lut_linear() computes the expected value of each entry with
expected = i * MAX_DRM_LUT_VALUE / (size - 1);
If it is ever called with a single-entry LUT, size - 1 is zero and the
kernel takes a divide error (#DE). A LUT with fewer than two entries
cannot describe a linear mapping anyway, so return false early instead
of dividing by zero.
drm/gud: NUL-terminate TV mode names read from the device
In the Linux kernel, the following vulnerability has been resolved:
drm/gud: NUL-terminate TV mode names read from the device
gud_connector_add_tv_mode() reads a buffer of fixed-size mode names from
the USB device and passes pointers into it to
drm_mode_create_tv_properties_legacy(), which calls strlen() on each one.
Nothing guarantees the device NUL-terminates a name, so strlen() can run
past the end of a slot and, for the last mode, past the end of the
allocation.
Terminate each name at the end of its slot before use.
drm: Fix drm_crtc_commit leak if signaled when PAGE_FLIP_EVENT is used
In the Linux kernel, the following vulnerability has been resolved:
drm: Fix drm_crtc_commit leak if signaled when PAGE_FLIP_EVENT is used
Commit 1c6ceeee6ebb ("drm/atomic: Fix memleak on ERESTARTSYS during
non-blocking commits") fixed a very similar issue when the event was
allocated by drm_atomic_helper_setup_commit() itself.
However, if the event is allocated in prepare_signaling(), it will also be
set to NULL in complete_signaling(), which prevents drm_crtc_commit from
being put in __drm_atomic_helper_crtc_destroy_state().
Dropping the reference when the event is set to NULL at
complete_signaling() fixes the leak.
The leak can be rep
drm/amdgpu: force complete the KIQ ring fences on reset
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: force complete the KIQ ring fences on reset
Like the MES scheduler ring, the KIQ ring sets no_scheduler = true and uses a
polling fence, so it is skipped by the force-completion loop in
amdgpu_device_pre_asic_reset(). Its hw fence value lives in wb (GTT) memory and
survives a MODE1 reset while fence_drv.sync_seq keeps advancing, so after a
reset the first KIQ submission can poll forever on a seq that is never written
back.
Force complete the KIQ ring fences too so their hw fence is realigned to
sync_seq.