media: uvcvideo: Handle cameras with invalid descriptors
In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Handle cameras with invalid descriptors
If the source entity does not contain any pads, do not create a link.
scsi: snic: Fix possible memory leak if device_add() fails
In the Linux kernel, the following vulnerability has been resolved:
scsi: snic: Fix possible memory leak if device_add() fails
If device_add() returns error, the name allocated by dev_set_name() needs
be freed. As the comment of device_add() says, put_device() should be used
to give up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanp().
cassini: Fix a memory leak in the error handling path of cas_init_one()
In the Linux kernel, the following vulnerability has been resolved:
cassini: Fix a memory leak in the error handling path of cas_init_one()
cas_saturn_firmware_init() allocates some memory using vmalloc(). This
memory is freed in the .remove() function but not it the error handling
path of the probe.
Add the missing vfree() to avoid a memory leak, should an error occur.
In the Linux kernel, the following vulnerability has been resolved:
net: add vlan_get_protocol_and_depth() helper
Before blamed commit, pskb_may_pull() was used instead
of skb_header_pointer() in __vlan_get_protocol() and friends.
Few callers depended on skb->head being populated with MAC header,
syzbot caught one of them (skb_mac_gso_segment())
Add vlan_get_protocol_and_depth() to make the intent clearer
and use it where sensible.
This is a more generic fix than commit e9d3f80935b6
("net/af_packet: make sure to pull mac header") which was
dealing with a similar issue.
kernel BUG at include/linux/skbuff.h:2655 !
invalid opcode: 0000 [#1
firewire: net: fix use after free in fwnet_finish_incoming_packet()
In the Linux kernel, the following vulnerability has been resolved:
firewire: net: fix use after free in fwnet_finish_incoming_packet()
The netif_rx() function frees the skb so we can't dereference it to
save the skb->len.
scsi: ses: Handle enclosure with just a primary component gracefully
In the Linux kernel, the following vulnerability has been resolved:
scsi: ses: Handle enclosure with just a primary component gracefully
This reverts commit 3fe97ff3d949 ("scsi: ses: Don't attach if enclosure
has no components") and introduces proper handling of case where there are
no detected secondary components, but primary component (enumerated in
num_enclosures) does exist. That fix was originally proposed by Ding Hui
<[email protected]>.
Completely ignoring devices that have one primary enclosure and no
secondary one results in ses_intf_add() bailing completely
scsi 2:0:0:254: enclosure has no enumerated components
sc
btrfs: don't check PageError in __extent_writepage
In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't check PageError in __extent_writepage
__extent_writepage currenly sets PageError whenever any error happens,
and the also checks for PageError to decide if to call error handling.
This leads to very unclear responsibility for cleaning up on errors.
In the VM and generic writeback helpers the basic idea is that once
I/O is fired off all error handling responsibility is delegated to the
end I/O handler. But if that end I/O handler sets the PageError bit,
and the submitter checks it, the bit could in some cases leak into the
submission context for fast enough I/O
Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times
device_add shall not be called multiple times as stated in its
documentation:
'Do not call this routine or device_register() more than once for
any device structure'
Syzkaller reports a bug as follows [1]:
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:33!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[...]
Call Trace:
<TASK>
__list_add include/linux/list.h:69 [inline]
list_add_tail include/linux/list.h:102 [inline]
kobj_kset_join lib/kobject.c:164 [inline]
kobject_add_interna
parisc: led: Fix potential null-ptr-deref in start_task()
In the Linux kernel, the following vulnerability has been resolved:
parisc: led: Fix potential null-ptr-deref in start_task()
start_task() calls create_singlethread_workqueue() and not checked the
ret value, which may return NULL. And a null-ptr-deref may happen:
start_task()
create_singlethread_workqueue() # failed, led_wq is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL.
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
In the Linux kernel, the following vulnerability has been resolved:
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
fcoe_init() calls fcoe_transport_attach(&fcoe_sw_transport), but when
fcoe_if_init() fails, &fcoe_sw_transport is not detached and leaves freed
&fcoe_sw_transport on fcoe_transports list. This causes panic when
reinserting module.
BUG: unable to handle page fault for address: fffffbfff82e2213
RIP: 0010:fcoe_transport_attach+0xe1/0x230 [libfcoe]
Call Trace:
<TASK>
do_one_initcall+0xd0/0x4e0
load_module+0x5eee/0x7210
...
ACPICA: Fix error code path in acpi_ds_call_control_method()
In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix error code path in acpi_ds_call_control_method()
A use-after-free in acpi_ps_parse_aml() after a failing invocaion of
acpi_ds_call_control_method() is reported by KASAN [1] and code
inspection reveals that next_walk_state pushed to the thread by
acpi_ds_create_walk_state() is freed on errors, but it is not popped
from the thread beforehand. Thus acpi_ds_get_current_walk_state()
called by acpi_ps_parse_aml() subsequently returns it as the new
walk state which is incorrect.
To address this, make acpi_ds_call_control_method() call
acpi_ds_pop_walk_state() to pop
NFSD: Protect against send buffer overflow in NFSv2 READ
In the Linux kernel, the following vulnerability has been resolved:
NFSD: Protect against send buffer overflow in NFSv2 READ
Since before the git era, NFSD has conserved the number of pages
held by each nfsd thread by combining the RPC receive and send
buffers into a single array of pages. This works because there are
no cases where an operation needs a large RPC Call message and a
large RPC Reply at the same time.
Once an RPC Call has been received, svc_process() updates
svc_rqst::rq_res to describe the part of rq_pages that can be
used for constructing the Reply. This means that the send buffer
(rq_res) shrinks when the received RPC reco
wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()
In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()
> ret = brcmf_proto_tx_queue_data(drvr, ifp->ifidx, skb);
may be schedule, and then complete before the line
> ndev->stats.tx_bytes += skb->len;
[ 46.912801] ==================================================================
[ 46.920552] BUG: KASAN: use-after-free in brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac]
[ 46.928673] Read of size 4 at addr ffffff803f5882e8 by task systemd-resolve/328
[ 46.935991]
[ 46.937514] CPU: 1 PID: 328 Comm: systemd-resolve Tainted: G O 5.4.199-[RE
net/tunnel: wait until all sk_user_data reader finish before releasing the sock
In the Linux kernel, the following vulnerability has been resolved:
net/tunnel: wait until all sk_user_data reader finish before releasing the sock
There is a race condition in vxlan that when deleting a vxlan device
during receiving packets, there is a possibility that the sock is
released after getting vxlan_sock vs from sk_user_data. Then in
later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got
NULL pointer dereference. e.g.
#0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757
#1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d
#2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48
#3 [ffffa25ec6978b60] oops
drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
In the Linux kernel, the following vulnerability has been resolved:
drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
Check the return value of md_bitmap_get_counter() in case it returns
NULL pointer, which will result in a null pointer dereference.
v2: update the check to include other dereference
nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
In the Linux kernel, the following vulnerability has been resolved:
nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
On error situation `clp->cl_cb_conn.cb_xprt` should not be given
a reference to the xprt otherwise both client cleanup and the
error handling path of the caller call to put it. Better to
delay handing over the reference to a later branch.
[ 72.530665] refcount_t: underflow; use-after-free.
[ 72.531933] WARNING: CPU: 0 PID: 173 at lib/refcount.c:28 refcount_warn_saturate+0xcf/0x120
[ 72.533075] Modules linked in: nfsd(OE) nfsv4(OE) nfsv3(OE) nfs(OE) lockd(OE) compat_nfs_ssc(OE) nfs_acl(OE) rpcsec_gss_k
In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: Fix Oops by 9.1 surround channel names
get_line_out_pfx() may trigger an Oops by overflowing the static array
with more than 8 channels. This was reported for MacBookPro 12,1 with
Cirrus codec.
As a workaround, extend for the 9.1 channels and also fix the
potential Oops by unifying the code paths accessing the same array
with the proper size check.
modpost: fix off by one in is_executable_section()
In the Linux kernel, the following vulnerability has been resolved:
modpost: fix off by one in is_executable_section()
The > comparison should be >= to prevent an out of bounds array
access.
In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer
ACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5
According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode.
When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed.
=============================================================
UBSAN: array-index-out-of-b
shmem: use ramfs_kill_sb() for kill_sb method of ramfs-based tmpfs
In the Linux kernel, the following vulnerability has been resolved:
shmem: use ramfs_kill_sb() for kill_sb method of ramfs-based tmpfs
As the ramfs-based tmpfs uses ramfs_init_fs_context() for the
init_fs_context method, which allocates fc->s_fs_info, use ramfs_kill_sb()
to free it and avoid a memory leak.