linux-fips vulnerabilities · Page 200

wifi: cfg80211: Lock wiphy in cfg80211_get_station

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Lock wiphy in cfg80211_get_station Wiphy should be locked before calling rdev_get_station() (see lockdep assert in ieee80211_get_station()). This fixes the following kernel NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000

• Update to 4.4.0-1111.118

ax25: Fix refcount imbalance on inbound connections

In the Linux kernel, the following vulnerability has been resolved: ax25: Fix refcount imbalance on inbound connections When releasing a socket in ax25_release(), we call netdev_put() to decrease the refcount on the associated ax.25 device. However, the execution path for accepting an incoming connection never calls netdev_hold(). This imbalance leads to refcount errors, and ultimately to kernel crashes. A typical call trace for the above situation will start with one of the following errors: refcount_t: decrement hit 0; leaking memory. refcount_t: underflow; use-after-free. And will then have a trace like: Call Trace: <

• Update to 4.4.0-1111.118

ipv6: fix possible race in __fib6_drop_pcpu_from()

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible race in __fib6_drop_pcpu_from() syzbot found a race in __fib6_drop_pcpu_from() [1] If compiler reads more than once (*ppcpu_rt), second read could read NULL, if another cpu clears the value in rt6_get_pcpu_route(). Add a READ_ONCE() to prevent this race. Also add rcu_read_lock()/rcu_read_unlock() because we rely on RCU protection while dereferencing pcpu_rt. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] C

USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages

In the Linux kernel, the following vulnerability has been resolved: USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% i

jfs: xattr: fix buffer overflow for invalid xattr

In the Linux kernel, the following vulnerability has been resolved: jfs: xattr: fix buffer overflow for invalid xattr When an xattr size is not what is expected, it is printed out to the kernel log in hex format as a form of debugging. But when that xattr size is bigger than the expected size, printing it out can cause an access off the end of the buffer. Fix this all up by properly restricting the size of the debug hex dump in the kernel log.

• Update to 4.4.0-1105.112

vmci: prevent speculation leaks by sanitizing event in event_deliver()

In the Linux kernel, the following vulnerability has been resolved: vmci: prevent speculation leaks by sanitizing event in event_deliver() Coverity spotted that event_msg is controlled by user-space, event_msg->event_data.event is passed to event_deliver() and used as an index without sanitization. This change ensures that the event index is sanitized to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Only compile tested, no access to HW.

ima: Fix use-after-free on a dentry's dname.name

In the Linux kernel, the following vulnerability has been resolved: ima: Fix use-after-free on a dentry's dname.name ->d_name.name can change on rename and the earlier value can be freed; there are conditions sufficient to stabilize it (->d_lock on dentry, ->d_lock on its parent, ->i_rwsem exclusive on the parent's inode, rename_lock), but none of those are met at any of the sites. Take a stable snapshot of the name instead.

• Update to 4.4.0-1106.113

bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()

In the Linux kernel, the following vulnerability has been resolved: bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set() In function bond_option_arp_ip_targets_set(), if newval->string is an empty string, newval->string+1 will point to the byte after the string, causing an out-of-bound read. BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418 Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107 CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inl

• Update to 4.4.0-1106.113

mmc: davinci: Don't strip remove function when driver is builtin

In the Linux kernel, the following vulnerability has been resolved: mmc: davinci: Don't strip remove function when driver is builtin Using __exit for the remove function results in the remove callback being discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g. using sysfs or hotplug), the driver is just removed without the cleanup being performed. This results in resource leaks. Fix it by compiling in the remove callback unconditionally. This also fixes a W=1 modpost warning: WARNING: modpost: drivers/mmc/host/davinci_mmc: section mismatch in reference: davinci_mmcsd_driver+0x10 (section: .data) -> davinci_mmcsd_remov

• Update to 4.4.0-1104.111

kdb: Fix buffer overflow during tab-complete

In the Linux kernel, the following vulnerability has been resolved: kdb: Fix buffer overflow during tab-complete Currently, when the user attempts symbol completion with the Tab key, kdb will use strncpy() to insert the completed symbol into the command buffer. Unfortunately it passes the size of the source buffer rather than the destination to strncpy() with predictably horrible results. Most obviously if the command buffer is already full but cp, the cursor position, is in the middle of the buffer, then we will write past the end of the supplied buffer. Fix this by replacing the dubious strncpy() calls with memmove()/memcpy() calls plus

CVE-2023-52340

The IPv6 implementation in the Linux kernel before 6.3 has a net/ipv6/route.c max_size threshold that can be consumed easily, e.g., leading to a denial of service (network is unreachable errors) when IPv6 packets are sent in a loop via a raw socket.

UBUNTU-CVE-2024-39362

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors The error handling in nilfs_empty_dir() when a directory folio/page read fails is incorrect, as in the old ext2 implementation, and if the folio/page cannot be read or nilfs_check_folio() fails, it will falsely determine the directory as empty and corrupt the file system. In addition, since nilfs_empty_dir() does not immediately return on a failed folio/page read, but continues to loop, this can cause a long loop with I/O if i_size of the directory's inode is also corrupted, causing the log writer thread

f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode() syzbot reports a kernel bug as below: F2FS-fs (loop0): Mounted with checkpoint version = 48b305e4 ================================================================== BUG: KASAN: slab-out-of-bounds in f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline] BUG: KASAN: slab-out-of-bounds in current_nat_addr fs/f2fs/node.h:213 [inline] BUG: KASAN: slab-out-of-bounds in f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600 Read of size 1 at addr ffff88807a58c76c by task syz-executor280/5076 CPU: 1 PID: 5076 Comm: syz-executor

net/9p: fix uninit-value in p9_client_rpc()

In the Linux kernel, the following vulnerability has been resolved: net/9p: fix uninit-value in p9_client_rpc() Syzbot with the help of KMSAN reported the following error: BUG: KMSAN: uninit-value in trace_9p_client_res include/trace/events/9p.h:146 [inline] BUG: KMSAN: uninit-value in p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 trace_9p_client_res include/trace/events/9p.h:146 [inline] p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_g

• Update to 4.4.0-1108.115

nilfs2: fix potential kernel bug due to lack of writeback flag waiting

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential kernel bug due to lack of writeback flag waiting Destructive writes to a block device on which nilfs2 is mounted can cause a kernel bug in the folio/page writeback start routine or writeback end routine (__folio_start_writeback in the log below): kernel BUG at mm/page-writeback.c:3070! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI ... RIP: 0010:__folio_start_writeback+0xbaa/0x10e0 Code: 25 ff 0f 00 00 0f 84 18 01 00 00 e8 40 ca c6 ff e9 17 f6 ff ff e8 36 ca c6 ff 4c 89 f7 48 c7 c6 80 c0 12 84 e8 e7 b3 0f 00 90 <0f> 0b e8 1f ca c6 ff 4

fpga: manager: add owner module and take its refcount

In the Linux kernel, the following vulnerability has been resolved: fpga: manager: add owner module and take its refcount The current implementation of the fpga manager assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the manager if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_manager struct and use it to take the module's refcount. Modify the functions for registering the manager to take an additi

um: Add winch to winch_handlers before registering winch IRQ

In the Linux kernel, the following vulnerability has been resolved: um: Add winch to winch_handlers before registering winch IRQ Registering a winch IRQ is racy, an interrupt may occur before the winch is added to the winch_handlers list. If that happens, register_winch_irq() adds to that list a winch that is scheduled to be (or has already been) freed, causing a panic later in winch_cleanup(). Avoid the race by adding the winch to the winch_handlers list before registering the IRQ, and rolling back if um_request_irq() fails.

• Update to 4.4.0-1104.111

enic: Validate length of nl attributes in enic_set_vf_port

In the Linux kernel, the following vulnerability has been resolved: enic: Validate length of nl attributes in enic_set_vf_port enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE is of length PORT_PROFILE_MAX and that the nl attributes IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX. These attributes are validated (in the function do_setlink in rtnetlink.c) using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation using the policy is for the max size of the

serial: max3100: Lock port->lock when calling uart_handle_cts_change()

In the Linux kernel, the following vulnerability has been resolved: serial: max3100: Lock port->lock when calling uart_handle_cts_change() uart_handle_cts_change() has to be called with port lock taken, Since we run it in a separate work, the lock may not be taken at the time of running. Make sure that it's taken by explicitly doing that. Without it we got a splat: WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0 ... Workqueue: max3100-0 max3100_work [max3100] RIP: 0010:uart_handle_cts_change+0xa6/0xb0 ... max3100_handlerx+0xc5/0x110 [max3100] max3100_work+0x12a/0x340 [max310