In the Linux kernel, the following vulnerability has been resolved:
crypto: mxs-dcp - fix source scatterlist length access
mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source
scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid
and could return zero or a stale DMA length, causing encryption and
decryption to process the wrong number of bytes when
CONFIG_NEED_SG_DMA_LENGTH=y.
Use the original scatterlist length instead.
In the Linux kernel, the following vulnerability has been resolved:
usb: core: Add lock to usb_wakeup_notification()
Add a spin lock to usb_wakeup notification to prevent a race condition
with dereferencing freed memory. This could be hit by the xHCI driver as
it calls this function from an IRQ and could race with the
hub_disconnect() function, which properly grabs this lock to protect the
state of the device.
ALSA: usb-audio: fix OOB write in snd_usbmidi_novation_output()
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix OOB write in snd_usbmidi_novation_output()
snd_usbmidi_novation_output() lays out a two-byte header at
transfer_buffer[0..1] and passes &transfer_buffer[2] together with a
length of ep->max_transfer - 2 to snd_rawmidi_transmit():
count = snd_rawmidi_transmit(ep->ports[0].substream,
&transfer_buffer[2],
ep->max_transfer - 2);
ep->max_transfer comes from the output endpoint's wMaxPacketSize via
usb_maxpacket(). A malformed or malicious device can advertise a bulk
OUT endpoint with a wMaxPacketSize of 1 - the USB core only clamps this
ALSA: usb-audio: Complete cleanup after system-resume errors
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Complete cleanup after system-resume errors
A failed system resume can leave the card unusable until reboot.
usb_audio_resume() jumps to err_out when snd_usb_pcm_resume() or
snd_usb_mixer_resume() fails. The error path skips the out: block, which
restores D0 and decrements chip->num_suspended_intf.
The card stays in SNDRV_CTL_POWER_D3hot, so later control access blocks in
snd_power_ref_and_wait(). USB core logs an interface resume callback error.
It does not retry that callback, so a later callback cannot complete the
skipped cleanup.
usb_audio_suspend()
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: option: fix slab OOB read in interrupt URB callback
The interrupt URB buffer is allocated in setup_port_interrupt_in() based
on the endpoint's wMaxPacketSize:
buffer_size = usb_endpoint_maxp(epd);
port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
When a USB device declares wMaxPacketSize = 8 on its interrupt IN
endpoint, the buffer is allocated from kmalloc-8 cache (exactly
8 bytes).
If the device sends a short packet (actual_length < wMaxPacketSize),
the URB completes with status == 0 and the callback proceeds to read:
data[sizeof(s
USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
In the Linux kernel, the following vulnerability has been resolved:
USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
When TD creation fails for the last packet of an isochronous URB,
c67x00_add_iso_urb() gives the URB back before updating the endpoint
scheduling state.
c67x00_giveback_urb() frees the URB private data, and the completion
callback may release the final URB reference. The following accesses to
urbp->ep_data, urb->interval, and urbp->cnt can therefore use freed
memory.
Update next_frame and cnt before giving back the failed final packet,
making the giveback the last operation that uses the URB and its private
data.
nfc: st21nfca: validate ATR_REQ length against the received frame
In the Linux kernel, the following vulnerability has been resolved:
nfc: st21nfca: validate ATR_REQ length against the received frame
st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at
least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length
is at least sizeof(struct st21nfca_atr_req), but never checks that
atr_req->length does not exceed the actual received length (skb->len).
st21nfca_tm_send_atr_res() then trusts the declared length:
gb_len = atr_req->length - sizeof(struct st21nfca_atr_req);
...
memcpy(atr_res->gbi, atr_req->gbi, gb_len);
so an RF peer that sends a short frame but sets atr_req
Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept
rfcomm_sock_recvmsg() completes a deferred setup by calling
rfcomm_dlc_accept() without holding any RFCOMM lock:
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
return 0;
}
and rfcomm_dlc_accept() dereferences the session on its first line:
struct sock *sk = d->session->sock->sk;
Every other path that touches d->session runs under rfcomm_mutex:
rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(),
rfcomm_dlc_send_rpn(), and the RFCOMM thread through
rfcomm_proc
rndis_host: add overflow check in rndis_rx_fixup()
In the Linux kernel, the following vulnerability has been resolved:
rndis_host: add overflow check in rndis_rx_fixup()
Add an overflow check to ensure that data_offset + data_len + 8 does not
wrap, which would enable an OOB read of the USB data buffer.
In the Linux kernel, the following vulnerability has been resolved:
ALSA: dummy: Check card index validity at probe
snd_dummy_probe() blindly trusts that the given devptr->id value is
within the proper card index range. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
ocfs2: fix missing metadata reservation for large xattrs
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix missing metadata reservation for large xattrs
[BUG]
lsetxattr() panics the kernel when setting a large xattr value on a
fragmented filesystem where the file already has an external xattr
block.
[CAUSE]
ocfs2_calc_xattr_set_need() never reserves metadata blocks for a new
xattr value's extent tree when the file already has an external xattr
block. The not_found path leaves meta_add at zero, so meta_ac is NULL
when ocfs2_xattr_extend_allocation() runs.
A new value root has room for a single extent record. On a fragmented
filesystem, the allocator cannot satisfy th
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: reject invalid block index in GC ioctl
Syzbot reported list corruption caused by a double list_add_tail() call on
bh->b_assoc_buffers within nilfs_lookup_dirty_data_buffers().
Analysis revealed that the root cause was the insertion of a page/folio
with a page index of ULONG_MAX into the page cache via the GC ioctl.
filemap_get_folios_tag(), called by nilfs_lookup_dirty_data_buffers(),
repeatedly detects a dirty folio with a page index of ULONG_MAX due to
index wrap-around, leading to duplicate processing of dirty buffers.
As a preparatory step, the GC ioctl loads
nfc: digital: clamp SENSF_RES length to the destination buffer
In the Linux kernel, the following vulnerability has been resolved:
nfc: digital: clamp SENSF_RES length to the destination buffer
digital_in_recv_sensf_res() memcpy()s resp->len bytes from a remote
NFC-F device response into the NFC_SENSF_RES_MAXSIZE-byte target.sensf_res
field without an upper-bound check. A nearby malicious NFC-F device can
send an oversized SENSF_RES response to overflow the stack-local struct
nfc_target.
Clamp resp->len to NFC_SENSF_RES_MAXSIZE before the copy.
Found by 0sec automated security-research tooling (https://0sec.ai).
nfc: fdp: bound the device-reported read length and fix an skb leak
In the Linux kernel, the following vulnerability has been resolved:
nfc: fdp: bound the device-reported read length and fix an skb leak
fdp_nci_i2c_read() takes the next packet length from two device-supplied
bytes and never validates it. The value is a u16 used as the
i2c_master_recv() count into a 261-byte on-stack buffer: a malicious,
counterfeit or malfunctioning controller (or an i2c bus interposer) can
drive it far past the buffer for a stack out-of-bounds write that
clobbers the canary and return address, or below the minimum frame size
(directly, or by truncating the computed sum) so the header/LRC strip
and the next length read run
In the Linux kernel, the following vulnerability has been resolved:
nfc: microread: validate target discovery payload lengths
microread_target_discovered() parses target discovery payloads from
skb->data according to the HCI gate. The fixed field offsets and UID
copies were checked only against the destination nfc_target buffers, not
against the actual skb length.
Validate that each gate-specific payload contains the fixed fields and
UID bytes before reading or copying them.
nfc: llcp: bound the connect_sn TLV walk to the skb
In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: bound the connect_sn TLV walk to the skb
Commit 27256cdb290e ("nfc: llcp: bound SNL TLV parsing to the skb and
add length checks") fixed the unbounded TLV walk in nfc_llcp_recv_snl(),
and commit d8bd2dedbde5 ("nfc: llcp: fix OOB read and u8 offset wrap in
TLV parsers") subsequently bounded nfc_llcp_parse_gb_tlv() and
nfc_llcp_parse_connection_tlv(). One sibling parser sharing the same
pattern remains unbounded: nfc_llcp_connect_sn().
nfc_llcp_connect_sn() walks a TLV list, reading a two-byte header
(type, length) followed by length bytes of value, without checki
nfc: llcp: reject PDUs shorter than the LLCP header
In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: reject PDUs shorter than the LLCP header
Every LLCP PDU begins with a two-byte header (DSAP/SSAP + PTYPE), but the
receive path never checked that a frame is at least LLCP_HEADER_SIZE bytes
before parsing it.
nfc_llcp_rx_skb() reads the header via nfc_llcp_ptype()/nfc_llcp_dsap()/
nfc_llcp_ssap(), which dereference pdu->data[0] and pdu->data[1], and a
CONNECT or CC PDU then computes
tlv_array_len = skb->len - LLCP_HEADER_SIZE;
as a size_t and hands it to the TLV walk. When the frame is shorter than
the header the subtraction wraps to a huge value and the walk
In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: purge fragmented skbs during cleanup
pn53x_common_clean() purges resp_q before freeing the common PN533 state,
but it leaves fragment_skb untouched. The fragmentation helpers queue
transmit fragments there while sending large initiator or target-mode
frames, and those skbs remain owned by the driver until they are sent or
discarded.
If the device is removed while fragments are still queued, the common
cleanup path frees the PN533 state without releasing the queued fragment
skbs, leaking them.
Purge fragment_skb during cleanup alongside resp_q.
nfc: nci: add data_len bound checks to activation parameter extractors
In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: add data_len bound checks to activation parameter extractors
nci_extract_activation_params_iso_dep() and
nci_extract_activation_params_nfc_dep() read an inner length byte from
the NCI RF_INTF_ACTIVATED_NTF payload and use it to memcpy() into fixed
kernel buffers, but neither function receives the caller-validated
activation_params_len. A crafted NCI notification with
activation_params_len=1 and an inner length byte of up to 20 (NFC-A) or
50 (NFC-B) causes memcpy() to read that many bytes past the one valid
byte in the activation params region -- a slab out-of-bou
nfc: nci: fix out-of-bounds write in nci_target_auto_activated()
In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix out-of-bounds write in nci_target_auto_activated()
nci_target_auto_activated() appends a target to the fixed-size array
ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets
without first checking the array is full; unlike its sibling
nci_add_new_target(), which bails out when n_targets already equals
NCI_MAX_DISCOVERED_TARGETS.
ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC
that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters
NCI_DISCOVERY without clearing the target list) and reports an
auto-activate