linux-fips vulnerabilities · Page 94

l2tp: Drop large packets with UDP encap

In the Linux kernel, the following vulnerability has been resolved: l2tp: Drop large packets with UDP encap syzbot reported a WARN on my patch series [1]. The actual issue is an overflow of 16-bit UDP length field, and it exists in the upstream code. My series added a debug WARN with an overflow check that exposed the issue, that's why syzbot tripped on my patches, rather than on upstream code. syzbot's repro: r0 = socket$pppl2tp(0x18, 0x1, 0x1) r1 = socket$inet6_udp(0xa, 0x2, 0x0) connect$inet6(r1, &(0x7f00000000c0)={0xa, 0x0, 0x0, @loopback, 0xfffffffc}, 0x1c) connect$pppl2tp(r0, &(0x7f0000000240)=@pppol2tpin6={0x18, 0x1, {0x0, r1, 0x4,

ocfs2: validate inline data i_size during inode read

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline data i_size during inode read When reading an inode from disk, ocfs2_validate_inode_block() performs various sanity checks but does not validate the size of inline data. If the filesystem is corrupted, an inode's i_size can exceed the actual inline data capacity (id_count). This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data buffer, triggering a use-after-free when accessing directory entries from freed memory. In the syzbot report: - i_size was 1099511627576 bytes (~1TB) - Actual inline data capacity (id_count) is typicall

ocfs2: fix out-of-bounds write in ocfs2_write_end_inline

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix out-of-bounds write in ocfs2_write_end_inline KASAN reports a use-after-free write of 4086 bytes in ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on a loop device. The actual bug is an out-of-bounds write past the inode block buffer, not a true use-after-free. The write overflows into an adjacent freed page, which KASAN reports as UAF. The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk id_count field to determine whether a write fits in inline da

x86-64: rename misleadingly named '__copy_user_nocache()' function

In the Linux kernel, the following vulnerability has been resolved: x86-64: rename misleadingly named '__copy_user_nocache()' function This function was a masterclass in bad naming, for various historical reasons. It claimed to be a non-cached user copy. It is literally _neither_ of those things. It's a specialty memory copy routine that uses non-temporal stores for the destination (but not the source), and that does exception handling for both source and destination accesses. Also note that while it works for unaligned targets, any unaligned parts (whether at beginning or end) will not use non-temporal stores, since only words and quad

dcache: Limit the minimal number of bucket to two

In the Linux kernel, the following vulnerability has been resolved: dcache: Limit the minimal number of bucket to two There is an OOB read problem on dentry_hashtable when user sets 'dhash_entries=1': BUG: unable to handle page fault for address: ffff888b30b774b0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP PTI RIP: 0010:__d_lookup+0x56/0x120 Call Trace: d_lookup.cold+0x16/0x5d lookup_dcache+0x27/0xf0 lookup_one_qstr_excl+0x2a/0x180 start_dirop+0x55/0xa0 simple_start_creating+0x8d/0xa0 debugfs_start_creating+0x8c/0x180 debugfs_create_

• Update to 4.4.0-1128.135

ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal()

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal() There's issue as follows: ... EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 w

xfs: close crash window in attr dabtree inactivation

In the Linux kernel, the following vulnerability has been resolved: xfs: close crash window in attr dabtree inactivation When inactivating an inode with node-format extended attributes, xfs_attr3_node_inactive() invalidates all child leaf/node blocks via xfs_trans_binval(), but intentionally does not remove the corresponding entries from their parent node blocks. The implicit assumption is that xfs_attr_inactive() will truncate the entire attr fork to zero extents afterwards, so log recovery will never reach the root node and follow those stale pointers. However, if a log shutdown occurs after the leaf/node block cancellations commit but

wifi: mac80211: check tdls flag in ieee80211_tdls_oper

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check tdls flag in ieee80211_tdls_oper When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the station exists but not whether it is actually a TDLS station. This allows the operation to proceed for non-TDLS stations, causing unintended side effects like modifying channel context and HT protection before failing. Add a check for sta->sta.tdls early in the ENABLE_LINK case, before any side effects occur, to ensure the operation is only allowed for actual TDLS peers.

HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq The wacom_intuos_bt_irq() function processes Bluetooth HID reports without sufficient bounds checking. A maliciously crafted short report can trigger an out-of-bounds read when copying data into the wacom structure. Specifically, report 0x03 requires at least 22 bytes to safely read the processed data and battery status, while report 0x04 (which falls through to 0x03) requires 32 bytes. Add explicit length checks for these report IDs and log a warning if a short report is received.

atm: lec: fix use-after-free in sock_def_readable()

In the Linux kernel, the following vulnerability has been resolved: atm: lec: fix use-after-free in sock_def_readable() A race condition exists between lec_atm_close() setting priv->lecd to NULL and concurrent access to priv->lecd in send_to_lecd(), lec_handle_bridge(), and lec_atm_send(). When the socket is freed via RCU while another thread is still using it, a use-after-free occurs in sock_def_readable() when accessing the socket's wait queue. The root cause is that lec_atm_close() clears priv->lecd without any synchronization, while callers dereference priv->lecd without any protection against concurrent teardown. Fix this by converti

HID: core: Mitigate potential OOB by removing bogus memset()

In the Linux kernel, the following vulnerability has been resolved: HID: core: Mitigate potential OOB by removing bogus memset() The memset() in hid_report_raw_event() has the good intention of clearing out bogus data by zeroing the area from the end of the incoming data string to the assumed end of the buffer. However, as we have previously seen, doing so can easily result in OOB reads and writes in the subsequent thread of execution. The current suggestion from one of the HID maintainers is to remove the memset() and simply return if the incoming event buffer size is not large enough to fill the associated report. Suggested-by Benjamin

HID: multitouch: Check to ensure report responses match the request

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Check to ensure report responses match the request It is possible for a malicious (or clumsy) device to respond to a specific report's feature request using a completely different report ID. This can cause confusion in the HID core resulting in nasty side-effects such as OOB writes. Add a check to ensure that the report ID in the response, matches the one that was requested. If it doesn't, omit reporting the raw event and return early.

btrfs: reject root items with drop_progress and zero drop_level

In the Linux kernel, the following vulnerability has been resolved: btrfs: reject root items with drop_progress and zero drop_level [BUG] When recovering relocation at mount time, merge_reloc_root() and btrfs_drop_snapshot() both use BUG_ON(level == 0) to guard against an impossible state: a non-zero drop_progress combined with a zero drop_level in a root_item, which can be triggered: ------------[ cut here ]------------ kernel BUG at fs/btrfs/relocation.c:1545! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 283 ... Tainted: 6.18.0+ #16 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU

crypto: af-alg - fix NULL pointer dereference in scatterwalk

In the Linux kernel, the following vulnerability has been resolved: crypto: af-alg - fix NULL pointer dereference in scatterwalk The AF_ALG interface fails to unmark the end of a Scatter/Gather List (SGL) when chaining a new af_alg_tsgl structure. If a sendmsg() fills an SGL exactly to MAX_SGL_ENTS, the last entry is marked as the end. A subsequent sendmsg() allocates a new SGL and chains it, but fails to clear the end marker on the previous SGL's last data entry. This causes the crypto scatterwalk to hit a premature end, returning NULL on sg_next() and leading to a kernel panic during dereference. Fix this by explicitly unmarking the end

mpls: add seqcount to protect the platform_label{,s} pair

In the Linux kernel, the following vulnerability has been resolved: mpls: add seqcount to protect the platform_label{,s} pair The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have an inconsistent view of platform_labels vs platform_label in case of a concurrent resize (resize_platform_label_table, under platform_mutex). This can lead to OOB accesses. This patch adds a seqcount, so that we get a consistent snapshot. Note that mpls_label_ok is also susceptible to this, so the check against RTA_DST in rtm_to_route_config, done outside platform_mutex, is not sufficient. This value gets passed to mpls_label_ok once more in both

net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak When processing Router Advertisements with user options the kernel builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct has three padding fields that are never zeroed and can leak kernel data The fix is simple, just zeroes the padding fields.

ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach()

In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside ic

• Update to 4.4.0-1126.133

ip6_tunnel: clear skb2->cb[] in ip4ip6_err()

In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip4ip6_err() Oskar Kjos reported the following problem. ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr value. __ip_options_echo() then reads optlen from attacker-controlled packet data at sptr[rr+1] and copies that many bytes into dopt->__data,

• Update to 4.4.0-1126.133

crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption When decrypting data that is not in-place (src != dst), there is no need to save the high-order sequence bits in dst as it could simply be re-copied from the source. However, the data to be hashed need to be rearranged accordingly. Thanks,

netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent ctnetlink_alloc_expect() allocates expectations from a non-zeroing slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not present in the netlink message, saved_addr and saved_proto are never initialized. Stale data from a previous slab occupant can then be dumped to userspace by ctnetlink_exp_dump_expect(), which checks these fields to decide whether to emit CTA_EXPECT_NAT. The safe sibling nf_ct_expect_init(), used by the packet path, explicitly zeroes these fields. Zero saved_addr, saved_