PatchFirst · Latest vulnerabilities
Vulnerabilities published for linux-azure-fips in the last 30 days: 394. Listed in the KEV catalogue: 0.
Vulnerabilities: 7287
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: pass eth to mtk_handle_irq_rx in poll_controller mtk_handle_irq_rx expects a struct mtk_eth * (matching the request_irq cookie), but mtk_poll_controller incorrectly passed the net_device *. Calling ndo_poll_controller with CONFIG_NET_POLL_CONTROLLER enabled would then crash.
In the Linux kernel, the following vulnerability has been resolved: tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions mmio_trace_rw() and mmio_trace_mapping() retrieve mmio_trace_array into tr and pass it to __trace_mmiotrace_rw() and __trace_mmiotrace_map(). If these functions are invoked while mmio_trace_array is NULL (e.g. before initialization or after disabled), accessing tr->array_buffer.buffer will result in a NULL pointer dereference crash. Fix this by adding an explicit NULL check for tr at the beginning of __trace_mmiotrace_rw() and __trace_mmiotrace_map().
In the Linux kernel, the following vulnerability has been resolved: vxlan: re-fetch eth header after route_shortcircuit() Before route_shortcircuit(), the eth header pointer is cached from eth_hdr(skb). Inside route_shortcircuit(), pskb_may_pull() can be called, which may reallocate skb->head. In this case, returning to vxlan_xmit() leaves the cached eth pointer pointing to freed memory, leading to a use-after-free when dereferencing eth->h_dest. Fix this by updating eth = eth_hdr(skb) after calling route_shortcircuit().
In the Linux kernel, the following vulnerability has been resolved: i2c: amd-mp2: Unregister callback on adapter add failure amd_mp2_register_cb() stores the platform I2C context in the MP2 PCI driver's callback table before the adapter is registered. If i2c_add_adapter() fails, probe returns and devres frees the context, but the PCI driver can still dereference the stale pointer from its IRQ and system-sleep callbacks. Unregister the callback before returning the adapter registration error.
In the Linux kernel, the following vulnerability has been resolved: perf sched: Fix register_pid() overflow, strcpy, and BUG_ON register_pid() has several issues when processing untrusted perf.data: 1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap to a small value on 32-bit systems when pid is large (e.g. 0x40000000), causing realloc to return a tiny buffer followed by out-of-bounds writes in the initialization loop. 2. Heap buffer overflow: strcpy(task->comm, comm) copies the untrusted comm string into a fixed 20-byte COMM_LEN buffer with no length check. 3. BUG_ON on allocation failure: perf.data is u
In the Linux kernel, the following vulnerability has been resolved: perf tools: Use perf_env__get_cpu_topology() in machine__resolve() machine__resolve() accesses env->cpu[al->cpu].socket_id after checking al->cpu >= 0 and env->cpu != NULL, but without validating al->cpu against env->nr_cpus_avail. Since al->cpu comes from the untrusted perf.data sample, a crafted file with a large CPU index causes an out-of-bounds heap read. Use perf_env__get_cpu_topology() which validates both NULL and bounds. Also bounds-check al->cpu before the cast to struct perf_cpu (int16_t): without this, values like 65536 silently truncate to 0, bypassing the acc
In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_nat: reject unsupported target families xt_nat SNAT and DNAT target handlers assume IP-family conntrack state is present and can dereference a NULL pointer when instantiated from an unsupported family through nft_compat. A bridge-family compat rule can therefore trigger a NULL-dereference in nf_nat_setup_info(). Reject non-IP families in xt_nat_checkentry() so unsupported targets cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT compat users and leave the runtime fast path unchanged. [ The crash was fixed via 9dbba7e694ec ("netfilter: nft_c
In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: defer reset until cmd_mutex is unlocked vub300_cmndwork_thread() holds cmd_mutex while it sends a command and waits for the command response. If the response wait times out, __vub300_command_response() kills the command URBs and then synchronously resets the USB device through usb_reset_device(). That reset path re-enters the driver through vub300_pre_reset(), which also takes cmd_mutex. The worker therefore tries to acquire the same mutex recursively while it is still holding it from the command path. This issue was found by our static analysis tool and th
In the Linux kernel, the following vulnerability has been resolved: media: atomisp: gc2235: fix UAF and memory leak gc2235_probe() handles its error paths incorrectly. If media_entity_pads_init() fails, gc2235_remove() is called, which tears down the subdev and frees dev, but then still falls through to atomisp_register_i2c_module(). This results in use-after-free. If atomisp_register_i2c_module() fails, the media entity and control handler are left initialized and dev is leaked. gc2235_remove() unconditionally calls media_entity_cleanup() and v4l2_ctrl_handler_free(), but these are not initialized at every error path in gc2235_probe().
In the Linux kernel, the following vulnerability has been resolved: rapidio/tsi721: prevent a bad dereference in tsi721_db_dpc() With a list_for_each() loop, if we don't find the item we are looking for in the list, then the loop exits with the iterator, which is "dbell" in this loop, pointing to invalid memory. This code uses the "found" variable to determine if we have found the doorbell we are looking for or not. However, the problem that the "found" variable needs to be set to false at the start of each iteration, otherwise after the first correct doorbell, then everything is marked as found. Reset the "found" to false at the start o
In the Linux kernel, the following vulnerability has been resolved: ocfs2: don't BUG_ON an invalid journal dinode [BUG] A fuzzed OCFS2 image can corrupt the current slot journal dinode while mount is still in progress. The mount path first reports the invalid journal block and then crashes in shutdown: kernel BUG at fs/ocfs2/journal.c:1034! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_journal_toggle_dirty+0x2d6/0x340 fs/ocfs2/journal.c:1034 Call Trace: ocfs2_journal_shutdown+0x414/0xc30 fs/ocfs2/journal.c:1116 ocfs2_mount_volume fs/ocfs2/super.c:1785 [inline] ocfs2_fill_super+0x30a9/0x3cd0 fs/ocfs2/super.c:1083 get_t
In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: fix unaligned memory access in timestamp adjustment Use get_unaligned_be32() and put_unaligned_be32() to safely read and write the timestamp fields. This prevents performance degradation due to unaligned memory access or even a crash on strict alignment architectures. This follows the implementation of timestamp parsing in the networking stack at tcp_parse_options() and synproxy_parse_options().
In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix OOB read from short trigger BA firmware response The firmware response length is only checked against sizeof(*rsp) (20 bytes), but when candidate_cnt >= 1, a 22-byte candidate struct is read at buf + 20 without verifying the response contains it. This causes an out-of-bounds read of stale heap data, corrupting the BA session state. Add validation that the response includes the candidate data.
In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_fq_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen Whenever fq_codel drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though fq_codel still has 1 packet on the queue and, thus, will mistakenly deactivate the parent's class causing issues like a recent report [1] and a wild memory access in qfq: [ 29.371146][ T360] Oops
In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Serialize readq reset state with q->lock snd_seq_oss_readq_clear() resets qlen, head, and tail without q->lock even though the normal reader and producer paths serialize the same ring state under that spinlock. A reset can therefore race snd_seq_oss_readq_free() or snd_seq_oss_readq_put_event() and leave stale records in the queue, drop freshly queued ones, or report the wrong readiness after wakeup. KCSAN reports a data race between snd_seq_oss_readq_clear() and snd_seq_oss_readq_free(). Take q->lock while clearing the ring and resetting input_time. Factor
In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at the 'out:' label, but only calls the matching get_cpu_var() after the 'i < 0' early-return check. When event->hw.idx is negative the function jumps to 'out:' without having taken get_cpu_var(), and the trailing put_cpu_var() then issues an unmatched preempt_enable(), underflowing preempt_count. On a CONFIG_PREEMPT=y kernel preempt_count would underflow and eventually present as a 'scheduling while atomic' BUG. Move put_cpu_var() to pair with g
In the Linux kernel, the following vulnerability has been resolved: char: tlclk: fix use-after-free in tlclk_cleanup() This patch improves the module cleanup process in the tlclk driver to prevent potential use-after-free and race conditions. Currently, the file_operations structure does not specify the .owner field, which could allow the module to be unloaded while user-space processes are still interacting with the device. Additionally, the tlclk_cleanup() function frees the alarm_events memory before ensuring that blocked processes in the waitqueue are fully awakened and that the switchover_timer has completed. To address these cases,
In the Linux kernel, the following vulnerability has been resolved: apparmor: fix potential UAF in aa_replace_profiles The function aa_replace_profiles was accessing udata->size after calling aa_put_loaddata(udata), causing a potential UAF. Fixed this by saving the size to a local variable before dropping the reference.
In the Linux kernel, the following vulnerability has been resolved: ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns() It's pointless to call WARN_ON() in case of an allocation failure in dev_change_net_namespace() and device_rename(), since it only leads to useless splats caused by deliberate fault injections, so avoid it. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
In the Linux kernel, the following vulnerability has been resolved: ACPI: processor_idle: Mark LPI enter functions as __cpuidle When function tracing or Kprobes is enabled, entering an ACPI Low Power Idle (LPI) state triggers the following RCU splat: RCU not on for: acpi_idle_lpi_enter+0x4/0xd8 WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228 The acpi_idle_lpi_enter() function is invoked within the cpuidle path after RCU has already been disabled for the current local CPU. Consequently, ftrace's function_trace_call() expects RCU to be actively watching before recording trace data, emitting
Check your installed stack and versions against the current vulnerability feeds.