PatchFirst · Latest vulnerabilities
Vulnerabilities published for linux-fips in the last 30 days: 393. Listed in the KEV catalogue: 0.
Vulnerabilities: 7065
In the Linux kernel, the following vulnerability has been resolved: leds: uleds: Fix potential buffer overread The name string supplied by userspace is not guaranteed to be null-terminated, so using strchr() on it might result in a buffer overread. The same thing will happen when said string is used by the LED class device. Fix this by using strnchr() instead and explicitly check that the name string is properly null-terminated.
In the Linux kernel, the following vulnerability has been resolved: mfd: sm501: Fix reference leak on failed device registration When platform_device_register() fails in sm501_register_device(), the embedded struct device in pdev has already been initialized by device_initialize(), but the failure path only reports the error and returns without dropping the device reference for the current platform device: sm501_register_device() -> platform_device_register(pdev) -> device_initialize(&pdev->dev) -> setup_pdev_dma_masks(pdev) -> platform_device_add(pdev) This leads to a reference leak when platform_device_registe
In the Linux kernel, the following vulnerability has been resolved: x86/boot: Validate console=uart8250 baud rate to fix early boot hang When the baud rate is empty, 0, invalid, or overflows to 0 when stored as an int, the system will hang during early boot because of a division by zero in early_serial_init(). Fall back to DEFAULT_BAUD when the resulting baud rate is 0 to prevent an early system hang.
In the Linux kernel, the following vulnerability has been resolved: s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init() ev variable is userspace controlled via event->attr.config and used as an array index after bounds checking, but without speculation barriers. Add the missing array_index_nospec() call to prevent speculative execution.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: retrieve ethhdr after potential skb realloc on RX pskb_may_pull() in batadv_interface_rx() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. This was done correctly for the VLAN header but missed for the ethernet header which is later used for the TT and AP isolation handling.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: access unicast_ttvn skb->data only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. This was done correctly for the ethernet header but missed for the unicast_packet pointer.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: reacquire gw address after skb realloc The pskb_may_pull() called by batadv_bla_is_backbone_gw() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: ensure minimal ethernet header on TX As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have at least eth header len bytes"), it is possible by for a local user with eBPF TC hook access to attach a tc filter which truncates the packet and redirects to an batadv interface. But the code assumes that at least ETH_HLEN bytes are available and thus might read outside of the available buffer. The batadv_interface_tx() must therefore always check itself if enough data is available for the ethernet header and don't rely on min_header_len.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: avoid request storms during pending request batadv_send_tt_request() allocates a tt_req_node when none exists for the destination originator node. This should prevent that a multiple TT requests are send at the same time to an originator. But if allocation of the send buffer failed, this request must be cleaned up again. But indicator for such a failure is "ret == false". But the actual implementation is checking for "ret == true". The check must be inverted to not loose the information about the TT request directly after it was attempted to be sent out. T
In the Linux kernel, the following vulnerability has been resolved: batman-adv: frag: free unfragmentable packet The caller of batadv_frag_send_packet() assume that the skb provided to the function are always consumed. But the pre-check for an empty payload or the zero fragment size returned an error without any further actions. A failed pre-check must use the same error handling code as the rest of the function.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: clean untagged VLAN on netdev registration failure When an mesh interface is registered, it creates an untagged struct batadv_meshif_vlan on top of it via the NETDEV_REGISTER notifier. But in this process, another receiver of this notification can veto the registration. The netdev registration will be aborted because of this veto. The register_netdevice() call will try to clean up the net_device using unregister_netdevice_queue() - which only uses the .priv_destructor to free private resources. In this situation, .dellink will not be called. The cleanup of the
In the Linux kernel, the following vulnerability has been resolved: batman-adv: frag: fix primary_if leak on failed linearization If the skb has a frag_list, it must be linearized before it can be split using skb_split(). But when this step failed, it must not only free the skb but also take care of the reference to the already found primary_if.
In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: prevent TVLV OOB check overflow A TT unicast TVLV contains the number of VLANs stored in it. This number is an u16 and gets multiplied by the size of the struct batadv_tvlv_tt_vlan_data (8 bytes). The size can therefore overflow the u16 used to store the tt_vlan_len. All additional safety checks to prevent out-of-bounds access of the TVLV buffer are invalid due to this overflow. Using size_t prevents this overflow and ensures that the safety checks compare against the actual buffer requirements.
In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Free arenas on btt_init() error paths The arenas allocated by discover_arenas() or create_arenas() are not freed on some error paths in btt_init(). This leaks memory when BTT initialization fails. Call free_arenas() from the affected error paths to release the allocations. [ as: commit message and log edits ]
In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Free arena sub-allocations on discover_arenas() error path Memory allocated by btt_freelist_init(), btt_rtt_init(), and btt_maplocks_init() is not freed on some discover_arenas() error paths. This leaks memory when arena discovery fails. Add the missing kfree() calls to release the allocations before returning an error. [ as: commit message and log edits ]
In the Linux kernel, the following vulnerability has been resolved: MIPS: DEC: Ensure 32-bit stack location for o32 prom_printf() In 64-bit configurations calling any firmware entry points from a kernel thread other than the initial one will result in a situation where the stack has been placed in the XKPHYS 64-bit memory segment. Consequently the stack pointer is no longer a 32-bit value and when the 32-bit firmware code called uses 32-bit ALU operations to manipulate the stack pointer, the calculated result is incorrect (in fact in the 64-bit MIPS ISA almost all 32-bit ALU operations will produce an unpredictable result when executed on
In the Linux kernel, the following vulnerability has been resolved: ntfs: skip extent mft records in writeback to prevent deadlock This patch fixes the ABBA deadlock between extent_lock and extent mrec_lock triggered by xfstests generic/113, that occurs since the commit 6994acf33bae ("ntfs: use base mft_no when looking up base inode for extent record"). Path A (inode writeback): VFS writeback -> ntfs_write_inode() -> __ntfs_write_inode() -> mutex_lock(&ni->extent_lock) -> mutex_lock(&tni->mrec_lock) Path B (MFT folio writeback): VFS writeback of $MFT dirty folios -> ntfs_mft_writepages() -> ntfs_w
In the Linux kernel, the following vulnerability has been resolved: ntfs: detect mapping-pairs LCN accumulator overflow The NTFS mapping-pairs parser accumulates relative LCN deltas in a signed integer. A corrupted attribute can drive that addition past the representable range. One corrupt runlist shape sets the accumulated LCN to S64_MAX and then adds a delta of 1 in the next mapping-pairs entry. Signed overflow is undefined and can turn an invalid runlist into a different set of physical clusters. Check the LCN addition for overflow before storing the next run.
In the Linux kernel, the following vulnerability has been resolved: ntfs: reject non-resident records for resident-only attributes The shared lookup-time attribute validator rejects non-resident $FILE_NAME and $VOLUME_NAME records because their formats require resident values and callers handle returned records as resident attributes. Other resident-only attribute types still pass through the generic non-resident mapping-pairs checks. That leaves real resident/non-resident union confusion paths. Inode load looks up $STANDARD_INFORMATION and then reads data.resident.value_offset without checking a->non_resident. ntfs_inode_sync_standard_inf
In the Linux kernel, the following vulnerability has been resolved: mips: sched: Fix CPUMASK_OFFSTACK memory corruption This patch addresses a critical memory management flaw. When CONFIG_CPUMASK_OFFSTACK is enabled, cpumask_var_t is a pointer. Consequently, sizeof(new_mask) evaluates to the pointer size, causing copy_from_user() to clobber the mask pointer. Furthermore, the old logic performed copy_from_user() before allocating the mask. Fix this by allocating new_mask first. To handle variable-sized user masks correctly, use cpumask_size() to truncate overly large user masks or pad undersized masks with zeros before copying the data dire
Check your installed stack and versions against the current vulnerability feeds.