In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Use devm_pm_runtime_enable()
sashiko complained about early usage of the device while probe isn't
completed. This can be mitigated by delaying the pm_runtime_enable()
into the removal path instead doing it early. This ensures that in an
error case the device is removed (and imx_mu_shutdown()) before
pm_runtime_disable() so we don't have to do this manually.
For the order to work, lets move devm_mbox_controller_register() until
after the pm-runtime part. So the reverse order will be mbox-controller
removal followed by disabling pm runtime.
Use devm_pm_runtime
In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Add a channel shutdown field
sashiko complained about possible teardown problem. The scenario
CPU 0 CPU 1
imx_mu_isr() imx_mu_shutdown()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, 0, IMX_MU_xCR_RIEn(priv->dcfg->type, cp->idx));
imx_mu_specific_rx()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, IMX_MU_xCR_RIEn(priv->dcfg->type, 0), 0);
free_irq()
The RX event remains enabled because in this short window the RX event
was disabled in ->shutdown() while the
md/raid5: let stripe batch bm_seq comparison wrap-safe
In the Linux kernel, the following vulnerability has been resolved:
md/raid5: let stripe batch bm_seq comparison wrap-safe
Once the 32-bit seq wraps, a newer bm_seq can look smaller
than old, so .. covert to wrap-safe calculate way.
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix lease break and ack state handling
Do not skip valid lease states containing WRITE_CACHING when breaking
level-II/read leases for writes and truncates.
Handle lease break acknowledgments according to the SMB2 rule that the
acknowledged state must be a subset of the server's break target. Apply
the acknowledged state directly and keep the break pending on failed ACKs.
xen/gntalloc: validate grant count before allocation
In the Linux kernel, the following vulnerability has been resolved:
xen/gntalloc: validate grant count before allocation
gntalloc_ioctl_alloc() allocates the grant-id array before checking
whether the requested count fits within the global grant limit. Counts
above that limit cannot succeed, so reject them before the
user-controlled allocation reaches kcalloc().
Use a subtraction-based check while holding gref_mutex so adding the
requested count cannot wrap. Also cast the count before advancing the
per-file index so the page-size multiplication is performed in 64-bit
arithmetic.
netfilter: ipset: mark the rcu locked areas properly
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: mark the rcu locked areas properly
When we bump the uref counter, there's no need to keep
the rcu lock because the referred hash table can't
disappear. Also, from the same reason in mtype_gc we
need the rcu lock and not a spinlock.
drm/amd/pm/si: Don't schedule thermal work when queue isn't initialized
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm/si: Don't schedule thermal work when queue isn't initialized
When DPM is turned off with the amdgpu.dpm=0 module parameter,
the thermal work queue isn't initialized so we shouldn't
schedule any work on it.
(cherry picked from commit bd018d36171a695952c6d391471c279c9e05c8b2)
ksmbd: don't hold ci->m_lock while waiting for a lease break ack
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: don't hold ci->m_lock while waiting for a lease break ack
When a cifs.ko client caches a read-handle (RH) lease via deferred close
and a conflicting open arrives, ksmbd breaks the lease and waits for the
acknowledgment in wait_for_break_ack() for up to OPLOCK_WAIT_TIME (35s).
__smb_break_all_levII_oplock() runs that wait while holding ci->m_lock
for read.
cifs.ko reacts to a handle-lease break by closing the deferred handle
rather than sending a lease break acknowledgment. That close path
(close_id_del_oplock() -> opinfo_del()) takes ci->m_lock for write and
is exac
thunderbolt: Keep the domain reference while processing hotplug
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Keep the domain reference while processing hotplug
We process hotplug events in a workqueue that may run after the domain
has been removed by tb_domain_remove(). For example if user unloads the
driver while at the same time plugging a device router we may have
scheduled tb_handle_hotplug() to run. Avoid possible UAF in this case by
taking the domain reference before scheduling the hotplug handler in
tb_queue_hotplug().
net/mlx5: HWS, Handle destroying table that has a miss table
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, Handle destroying table that has a miss table
If a table has a miss table that was created by
'mlx5hws_table_set_default_miss' API function, its miss_tbl
keeps the table that points to it in a list.
If such table is deleted, we need to also remove it from the
miss_tbl list, otherwise the node in miss_tbl list will contain
garbage.
drm/amd/ras: reset CPER ring on corrupt entry size
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/ras: reset CPER ring on corrupt entry size
When CPER ring overflow handling advances the read pointer, it trusts the
parsed entry size from the current ring contents. Corrupt CPER data can
produce an entry size that does not advance rptr after dword conversion
and pointer masking.
In that case the recovery loop keeps testing the same location while
holding the CPER ring mutex. This can hang the worker that is writing the
next CPER record.
Detect a no-progress rptr update and reset the CPER ring to an empty
state instead. This drops the corrupt contents and lets th
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Validate SENSOR_UPDATE payload size
SENSOR_UPDATE carries one or more sensor readings after the fixed
notification header. The parser derives the expected reading count
from the sensor description, but it did not verify that the received
payload contains those entries before parsing them.
Reject truncated update notifications before reading the variable
array.
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Validate BASE_ERROR_EVENT payload size
BASE_ERROR_EVENT carries a variable number of message reports,
with the count encoded in error_status. The notification parser used
that count without checking whether the received payload contained all
reported entries.
Reject truncated payloads before copying the report array.
wifi: mac80211: validate deauth frame length before reason access
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate deauth frame length before reason access
ieee80211_rx_mgmt_deauth() reads the deauth reason code before checking
that the fixed field is actually present in the received frame.
Validate the deauth frame length first and only then read the reason
code.
In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: reject short monitor TX frames
In monitor mode, lbs_hard_start_xmit() casts skb->data to a
radiotap TX header, skips that header, and then copies the 802.11
destination address from offset 4 in the remaining frame. The
generic length check only rejects zero-length and oversized skbs, so
a short monitor frame can be read past the end of the skb data.
Require enough bytes for the radiotap TX header and the destination
address field before using the monitor-mode header layout.
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix sched scan IE sizing
Scheduled scan built the probe request before iwl_mvm_scan_fits(),
so oversized IEs could be copied into the fixed preq buffer before
length validation. Move iwl_mvm_build_scan_probe() after the fits
check.
Also advertise max_sched_scan_ie_len using iwl_mvm_max_scan_ie_len()
so userspace limits account for driver-inserted DS/TPC bytes.
arm64: kprobes: Allow reentering kprobes while single-stepping
In the Linux kernel, the following vulnerability has been resolved:
arm64: kprobes: Allow reentering kprobes while single-stepping
A kprobe can be hit while another kprobe is in KPROBE_HIT_SS state. This
can happen when tracing or perf code runs from the debug exception path
while the first kprobe is preparing or executing its out-of-line
single-step instruction.
Currently arm64 treats a kprobe hit in KPROBE_HIT_SS as unrecoverable,
the same as a hit in KPROBE_REENTER. This is too strict. A hit in
KPROBE_HIT_SS is still a one-level reentry and can be handled by saving
the current kprobe state and setting up single-step for the new probe,
j
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: reject undersized HWSIM_ATTR_TX_INFO
hwsim_tx_info_frame_received_nl() casts the HWSIM_ATTR_TX_INFO payload
to a struct hwsim_tx_rate * and unconditionally reads
IEEE80211_TX_MAX_RATES entries (8 bytes) from it. The policy only bounds
the attribute from above (NLA_BINARY .len is a maximum) and the op sets
GENL_DONT_VALIDATE_STRICT, so a short or zero-length attribute is
accepted and the loop reads past the payload.
Require the exact length in the policy, so a malformed attribute is
rejected before the handler runs.
drm/gma500: return errors from Oaktrail HDMI I2C reads
In the Linux kernel, the following vulnerability has been resolved:
drm/gma500: return errors from Oaktrail HDMI I2C reads
xfer_read() waits for the HDMI I2C transaction to reach
I2C_TRANSACTION_DONE, but it ignores both timeout and signal returns from
wait_for_completion_interruptible_timeout(). If the interrupt never
advances the transaction state, the loop can wait forever.
Return -ETIMEDOUT when the completion wait expires, propagate interrupted
waits, and make the I2C master_xfer callback return the first transfer
error instead of reporting a successful message count.
ima: return error early if file xattr cannot be changed
In the Linux kernel, the following vulnerability has been resolved:
ima: return error early if file xattr cannot be changed
During early boot, the filesystem is read-only and any changes
to xattrs are not allowed. This fails in case of ext4 because
changing xattr starts an ext4 transaction which fails with the
following warning.
WARNING: fs/ext4/ext4_jbd2.c:75 at ext4_journal_check_start+0x63/0xa0 [ext4], CPU#1: systemd-sysroot/561
CPU: 1 UID: 0 PID: 561 Comm: systemd-sysroot Not tainted 6.19.12-1-default #1 PREEMPT(voluntary) openSUSE Tumbleweed c2dfc3c9d9f6f1233251c5d4410574fe82a348ee
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),