ALSA: 6fire: fix OOB write from device-reported iso length
In the Linux kernel, the following vulnerability has been resolved:
ALSA: 6fire: fix OOB write from device-reported iso length
usb6fire_pcm_in_urb_handler() sizes each outgoing isochronous packet as
(actual_length - 4) / (in_n_analog << 2) * (out_n_analog << 2) + 4, where
actual_length is the unsigned length the device reported for the matching
IN packet. A packet completed with status 0 and actual_length < 4 wraps
the subtraction to 0x7fffffec; a zero-length isochronous packet is legal
on the bus, and the preceding loop rejects only non-zero status. The sum
reaches memset() on out_urb->buffer, a 4832-byte object from
kcalloc(PCM_MAX_PACK
wifi: virt_wifi: don't transfer operstate before register
In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: don't transfer operstate before register
virt_wifi_newlink() calls netif_stacked_transfer_operstate() before
register_netdevice(). If the lower device is dormant, that queues the
new netdev on lweventlist while it is still uninitialized. If
registration fails after that, for example because of an invalid name
such as "bad/name", free_netdev() immediately frees the object. A
later linkwatch_fire_event() then use-after-frees the list entry.
Move the transfer to after netdev_upper_dev_link(), as macvlan and
ipvlan already do.
drm/vc4: Use managed KMS polling to fix UAF on unbind
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Use managed KMS polling to fix UAF on unbind
vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides
no matching drm_kms_helper_poll_fini(). The output poll work stays
scheduled after unbind and runs on the freed drm_device:
# modprobe vc4; rmmod vc4; sleep 10
BUG: KASAN: slab-use-after-free in delayed_work_timer_fn
BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm]
Workqueue: events output_poll_execute [drm_kms_helper]
Allocated by task 171: __devm_drm_dev_alloc
Freed by task 262 (rmmod): drm_dev_put / component_del
Use d
ALSA: hda: trace PCM open only after assigning a stream
In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: trace PCM open only after assigning a stream
Stream assignment can fail when hardware streams are exhausted.
Move the tracepoint after the NULL check because its payload accesses
the assigned stream tag.
Detected by static analysis and reviewed with AI-assisted source auditing.
wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all()
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all()
When mac80211 removes a sta, it calls .sta_state() which in turn calls
ath11k_mac_station_remove(). In that function we clean up both peers &
arsta related resources.
But when the firmware crashes, ath11k calls ieee80211_restart_hw(), which
assumes that all driver related resources are cleaned up beforehand. This
cleanup is supposedly done by ath11k_mac_peer_cleanup_all() but does not
in fact free arsta->rx_stats / tx_stats.
Extract the arsta cleanup from ath11k_mac_station_remove() into a
new ath11k_mac_station
seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation
In the Linux kernel, the following vulnerability has been resolved:
seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation
When an SRv6 packet arrives on an interface enslaved to a VRF,
vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate()
has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the
common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of
a reassembled outer packet could even set it, with no VRF involved.
Commit 44930446dde4 ("ipv6: seg6: clear IPv4 control block on IPIP
decapsulation") then made the unreliable bit reliably clear.
The effect of the missing flag is visible with End.
net: bcmgenet: restore the hardware filters on open
In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: restore the hardware filters on open
bcmgenet_hfb_init() runs INIT_LIST_HEAD() on priv->rxnfc_list, which drops
every rule off the list, and bcmgenet_open() calls it on each ifup. Every
rule the user configured is silently lost:
# ethtool -N eth0 flow-type ether dst $MAC action 0
Added rule with ID 0
# ethtool -n eth0 | grep -c Filter:
1
# ip link set eth0 down && ip link set eth0 up
# ethtool -n eth0 | grep -c Filter:
0
Initialise the lists once at probe and restore the rules on open, as
bcmgenet_resume() already does.
ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup
In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup
When the forward output route cannot be used in icmp_route_lookup(),
it enters the "reverse path" and calls ip_route_input() on fl4_dec.daddr,
the original packet's source address.
ip_route_input() only returns an error for truly invalid packets. For
unreachable addresses it will succeed and return an input route whose
dst.output is set to ip_rt_bug(). The existing check only rejects
RTN_LOCAL routes, so the RTN_UNREACHABLE route types can still be returned
and later used for output, syzkaller triggering
net: fddi: skfp: fix NULL deref when setting the MAC address while down
In the Linux kernel, the following vulnerability has been resolved:
net: fddi: skfp: fix NULL deref when setting the MAC address while down
skfp_ctl_set_mac_address() calls ResetAdapter() unconditionally, without
checking netif_running(). ResetAdapter() first calls card_stop(), which
sets smc->hw.hw_state to STOPPED, and then mac_drv_clear_tx_queue(),
which walks the two transmit queues:
for (i = QUEUE_S; i <= QUEUE_A0; i++) {
queue = smc->hw.fp.tx[i] ;
...
t = queue->tx_curr_get ;
smc->hw.fp.tx[] is only populated by init_tx(), which is reached from
skfp_open() through init_smt() -> init_fddi_driver() -> init_fplus() ->
init_mac()
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: move switchdev call outside rcu
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferre
tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv().
In the Linux kernel, the following vulnerability has been resolved:
tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv().
tcp_v6_do_rcv() no longer calls skb_clone_and_charge_r() for
TCP_LISTEN since commit 073d89808c06 ("net: fix data-races around
sk->sk_forward_alloc").
However, there is still a small race window between tcp_v6_rcv()
and tcp_v6_do_rcv(), where concurrent close() changes TCP_LISTEN
to TCP_CLOSE, causing skb_clone_and_charge_r() to be called
locklessly and resulting in the splat below. [0]
Let's avoid calling skb_clone_and_charge_r() for TCP_CLOSE as well.
This is fine for non-listeners becau
In the Linux kernel, the following vulnerability has been resolved:
tcp: do not let tcp_rmem be set below 4096
We can hit a division by zero crash in tcp_rcvbuf_grow()
and tcp_rcv_space_adjust():
divide error: 0000 [#1] PREEMPT SMP
RIP: 0010:tcp_rcvbuf_grow+0x187/0x450 net/ipv4/tcp_input.c:939
...
grow = div_u64(((u64)rcvwin << 1) * (newval - oldval), oldval);
The division uses oldval = tp->rcvq_space.space as divisor.
When tp->rcvq_space.space is zero, this leads to a divide-by-zero
exception.
tp->rcvq_space.space is initialized in tcp_init_buffer_space():
tp->rcvq_space.space = min3(tp->rcv_ssthresh, tp->rcv_wnd,
dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg()
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg()
In mmp_pdma_prep_slave_sg(), for_each_sg() iterates the scatterlist
putting each entry into 'sg', but the entry length is read from 'sgl'
(the list head) instead of 'sg' (the current entry):
for_each_sg(sgl, sg, sg_len, i) {
addr = sg_dma_address(sg);
avail = sg_dma_len(sgl); /* should be 'sg' */
Consequently 'avail' is always the length of the first entry. For
multi-sg lists this causes out-of-bounds reads when a later entry is
shorter than the first, and silent data loss when it i
Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained
hci_send_acl(), hci_send_sco() and hci_send_iso() queue hdev->tx_work
unconditionally. They can run from the L2CAP/SCO/ISO socket send path
while hci_dev_close_sync() is draining hdev->workqueue (HCIDEVDOWN
racing with a socket write). Since that queue_work() is not chained
work from the tx_work worker itself, __queue_work() sees the queue
marked __WQ_DRAINING, warns "cannot queue %ps on wq %s", and drops
the work:
WARNING: CPU: 1 PID: 5985 at kernel/workqueue.c:2352 __queue_work
Call Trace:
queue_w
Bluetooth: coredump: Quiesce dump work on unregister
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: coredump: Quiesce dump work on unregister
hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers
queue dump_rx without holding an hdev reference. Unregister leaves both
works live, so disconnecting during an active dump lets them access hdev
after hci_release_dev() frees it.
Shut down coredump processing during unregister. Close the producer gate
under dump_q.lock before disabling both works, then free the active buffer
and queued packets under hci_dev_lock. Serializing the gate with enqueue
prevents controller-specific workers from adding packets
Bluetooth: hci_qca: Do not write to the serial port after it is closed
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: Do not write to the serial port after it is closed
hci_uart_close() closes the serdev port if HCI_QUIRK_NON_PERSISTENT_SETUP
is set (for example, for the WCN399x family). A failed hci_dev_open_sync()
following a successful qca_setup() calls hdev->close() but not
hdev->shutdown(), so the port is closed while power->vregs_on is left true.
qca_serdev_remove() then passes its power->vregs_on test and calls
qca_power_off(), which writes to the closed port unconditionally.
Seen on a WCN3988 by unbinding the driver after a controller failure. The
trace below i
Bluetooth: ISO: Fix parent socket leak in iso_conn_ready()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix parent socket leak in iso_conn_ready()
iso_get_sock() returns the parent socket with a reference held, which is
dropped by sock_put() once the child socket has been set up. The error
path taken when iso_sock_alloc() fails only calls release_sock() and
returns, leaking the reference and thus the parent socket itself.
Drop the reference on that path as well.
Bluetooth: btmtksdio, btmtkuart: validate WMT event length before struct access
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtksdio, btmtkuart: validate WMT event length before struct access
btmtksdio.c and btmtkuart.c cast a received WMT event straight to
struct btmtk_hci_wmt_evt and read its op/flag fields without checking
the event is long enough to contain them, unlike btmtk.c. The
FUNC_CTRL case then further casts to struct btmtk_hci_wmt_evt_funcc
and reads its 2-byte status field, again without a length check.
Firmware that sends a short or malformed WMT event makes both drivers
read past the end of the received SKB.
Mirror btmtk.c: validate the base WMT header with skb_pull_
Bluetooth: RFCOMM: avoid socket lock inversion in listener cleanup
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: avoid socket lock inversion in listener cleanup
rfcomm_sock_cleanup_listen() closes unaccepted child sockets through
rfcomm_sock_close(), which takes the child socket lock before
rfcomm_dlc_close() acquires rfcomm_mutex. The RFCOMM worker takes these
locks in reverse order while handling connections and DLC state changes,
so lockdep reports a possible deadlock.
Close dequeued children without taking their socket lock. The accept queue
owns a reference to each child, and bt_accept_dequeue() locks the child
while unlinking it and clearing its parent pointe
af_unix: Unify scc_index when finalising SCC in __unix_walk_scc().
In the Linux kernel, the following vulnerability has been resolved:
af_unix: Unify scc_index when finalising SCC in __unix_walk_scc().
Commit bfdb01283ee8 ("af_unix: Assign a unique index to SCC.")
changed Tarjan's algorithm to update lowlink with lowlink,
which is called lowpoint (unix_vertex.scc_index).
unix_vertex_dead() assumes all vertices in an SCC share the same
lowpoint, but this is not always true if an SCC has two or more
back edges, depending on the order of DFS.
For example, the graph below has two back edges from B to A
and from C to B.
A --> B --> C
^ | ^ |
`----' `----'
If DFS walks through A -> B -> C -> B (-