linux-intel-iot-realtime vulnerabilities · Page 193

xfrm6: fix uninitialized saddr in xfrm6_get_saddr()

In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix uninitialized saddr in xfrm6_get_saddr() xfrm6_get_saddr() does not check the return value of ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable source address (returns -EADDRNOTAVAIL), saddr->in6 is left uninitialized, but xfrm6_get_saddr() still returns 0 (success). This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized address in xfrm_state_find(), triggering KMSAN warning: ===================================================== BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940 xfrm_state_find+0x2424/0xa940 xfrm

• Update to 5.15.0-1104.106

HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()

In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Check maxfield in hidpp_get_report_length() Do not crash when a report has no fields. Fake USB gadgets can send their own HID report descriptors and can define report structures without valid fields. This can be used to crash the kernel over USB.

• Update to 5.15.0-1104.106

media: cx23885: Add missing unmap in snd_cx23885_hw_params()

In the Linux kernel, the following vulnerability has been resolved: media: cx23885: Add missing unmap in snd_cx23885_hw_params() In error path, add cx23885_alsa_dma_unmap() to release the resource acquired by cx23885_alsa_dma_map().

• Update to 5.15.0-1104.106

Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ This adds a check for encryption key size upon receiving L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which expects L2CAP_CR_LE_BAD_KEY_SIZE.

• Update to 5.15.0-1104.106

KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB.

• Update to 5.15.0-1104.106

dm-verity: correctly handle dm_bufio_client_create() failure

In the Linux kernel, the following vulnerability has been resolved: dm-verity: correctly handle dm_bufio_client_create() failure If either of the calls to dm_bufio_client_create() in verity_fec_ctr() fails, then dm_bufio_client_destroy() is later called with an ERR_PTR() argument. That causes a crash. Fix this.

• Update to 5.15.0-1104.106

iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected") relies on pci_dev_is_disconnected() to skip ATS invalidation for safely-removed devices, but it does not cover link-down caused by faults, which can still hard-lock the system. For example, if a VM fails to connect to the PCIe device, "virsh destroy" is executed to release resources and isolate the fault, but a hard-lockup occurs while releasing the group fd. Call Trace: qi_submit_sync qi_fl

• Update to 5.15.0-1104.106

ALSA: mixer: oss: Add card disconnect checkpoints

In the Linux kernel, the following vulnerability has been resolved: ALSA: mixer: oss: Add card disconnect checkpoints ALSA OSS mixer layer calls the kcontrol ops rather individually, and pending calls might be not always caught at disconnecting the device. For avoiding the potential UAF scenarios, add sanity checks of the card disconnection at each entry point of OSS mixer accesses. The rwsem is taken just before that check, hence the rest context should be covered by that properly.

pstore: ram_core: fix incorrect success return when vmap() fails

In the Linux kernel, the following vulnerability has been resolved: pstore: ram_core: fix incorrect success return when vmap() fails In persistent_ram_vmap(), vmap() may return NULL on failure. If offset is non-zero, adding offset_in_page(start) causes the function to return a non-NULL pointer even though the mapping failed. persistent_ram_buffer_map() therefore incorrectly returns success. Subsequent access to prz->buffer may dereference an invalid address and cause crashes. Add proper NULL checking for vmap() failures.

• Update to 5.15.0-1104.106

fbcon: check return value of con2fb_acquire_newinfo()

In the Linux kernel, the following vulnerability has been resolved: fbcon: check return value of con2fb_acquire_newinfo() If fbcon_open() fails when called from con2fb_acquire_newinfo() then info->fbcon_par pointer remains NULL which is later dereferenced. Add check for return value of the function con2fb_acquire_newinfo() to avoid it. Found by Linux Verification Center (linuxtesting.org) with SVACE.

• Update to 5.15.0-1104.106

rpmsg: core: fix race in driver_override_show() and use core helper

In the Linux kernel, the following vulnerability has been resolved: rpmsg: core: fix race in driver_override_show() and use core helper The driver_override_show function reads the driver_override string without holding the device_lock. However, the store function modifies and frees the string while holding the device_lock. This creates a race condition where the string can be freed by the store function while being read by the show function, leading to a use-after-free. To fix this, replace the rpmsg_string_attr macro with explicit show and store functions. The new driver_override_store uses the standard driver_set_override helper. Since t

• Update to 5.15.0-1104.106

wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band()

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band() Simplify the code by using device managed memory allocations. This also fixes a memory leak in rtw_register_hw(). The supported bands were not freed in the error path. Copied from commit 145df52a8671 ("wifi: rtw89: Convert rtw89_core_set_supported_band to use devm_*").

most: core: fix resource leak in most_register_interface error paths

In the Linux kernel, the following vulnerability has been resolved: most: core: fix resource leak in most_register_interface error paths The function most_register_interface() did not correctly release resources if it failed early (before registering the device). In these cases, it returned an error code immediately, leaking the memory allocated for the interface. Fix this by initializing the device early via device_initialize() and calling put_device() on all error paths. The most_register_interface() is expected to call put_device() on error which frees the resources allocated in the caller. The put_device() either calls release_mdev()

Bluetooth: hci_sync: annotate data-races around hdev->req_status

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: annotate data-races around hdev->req_status __hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock: hdev->req_status = HCI_REQ_PEND; However, several other functions read or write hdev->req_status without holding any lock: - hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue) - hci_cmd_sync_complete() reads/writes from HCI event completion - hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write - hci_abort_conn() reads in connection abort path Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while hci_se

btrfs: fix zero size inode with non-zero size after log replay

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix zero size inode with non-zero size after log replay When logging that an inode exists, as part of logging a new name or logging new dir entries for a directory, we always set the generation of the logged inode item to 0. This is to signal during log replay (in overwrite_item()), that we should not set the i_size since we only logged that an inode exists, so the i_size of the inode in the subvolume tree must be preserved (as when we log new names or that an inode exists, we don't log extents). This works fine except when we have already logged an inode in full mo

btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()

In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file() If overlay is used on top of btrfs, dentry->d_sb translates to overlay's super block and fsid assignment will lead to a crash. Use file_inode(file)->i_sb to always get btrfs_sb.

• Update to 5.15.0-1103.105

netfilter: ctnetlink: ensure safe access to master conntrack

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ensure safe access to master conntrack Holding reference on the expectation is not sufficient, the master conntrack object can just go away, making exp->master invalid. To access exp->master safely: - Grab the nf_conntrack_expect_lock, this gets serialized with clean_from_lists() which also holds this lock when the master conntrack goes away. - Hold reference on master conntrack via nf_conntrack_find_get(). Not so easy since the master tuple to look up for the master conntrack is not available in the existing problematic paths. This patch g

srcu: Use irq_work to start GP in tiny SRCU

In the Linux kernel, the following vulnerability has been resolved: srcu: Use irq_work to start GP in tiny SRCU Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(), which acquires the workqueue pool->lock. This causes a lockdep splat when call_srcu() is called with a scheduler lock held, due to: call_srcu() [holding pi_lock] srcu_gp_start_if_needed() schedule_work() -> pool->lock workqueue_init() / create_worker() [holding pool->lock] wake_up_process() -> try_to_wake_up() -> pi_lock Also add irq_work_sync() to cleanup_srcu_struct() to prevent a use-after-free if a queued irq_work fires after cleanup be

netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry New test case fails unexpectedly when avx2 matching functions are used. The test first loads a ranomly generated pipapo set with 'ipv4 . port' key, i.e. nft -f foo. This works. Then, it reloads the set after a flush: (echo flush set t s; cat foo) | nft -f - This is expected to work, because its the same set after all and it was already loaded once. But with avx2, this fails: nft reports a clashing element. The reported clash is of following form: We successfully re-inserted a . b

• Update to 5.15.0-1103.105

wifi: wl1251: validate packet IDs before indexing tx_frames

In the Linux kernel, the following vulnerability has been resolved: wifi: wl1251: validate packet IDs before indexing tx_frames wl1251_tx_packet_cb() uses the firmware completion ID directly to index the fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from the completion block, and the callback does not currently verify that it fits the array before dereferencing it. Reject completion IDs that fall outside wl->tx_frames[] and keep the existing NULL check in the same guard. This keeps the fix local to the trust boundary and avoids touching the rest of the completion flow.

• Update to 5.15.0-1104.106