PatchFirst · Latest vulnerabilities
Vulnerabilities published for linux-intel-iot-realtime in the last 30 days: 593. Listed in the KEV catalogue: 0.
Vulnerabilities: 9453
In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Wait for RCU callbacks before unloading ib_core put_gid_ndev() is queued with call_rcu() and implemented in ib_core. Stopping the workqueues does not drain callbacks already queued, so RCU could invoke it after the module code has been unloaded. synchronize_rcu() does not wait for callbacks. Wait for them after all producers have stopped.
In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Drain RCU callbacks during module teardown devx_free_subscription() can remain queued after the last DevX event file drops its module reference or an auxiliary driver detaches its devices. mlx5_ib can then unload before the callback runs. Registration error unwind has the same risk because driver registration can attach existing devices before failing. Wait after all drivers have stopped.
In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Drain RCU callbacks during module teardown IPoIB reclamation completions can be signaled from inside an RCU callback. Teardown can wake before the callback returns and unload ib_ipoib while its code is still executing. Client registration failure can also remove already-added devices and queue callbacks. Wait after client and workqueue teardown.
In the Linux kernel, the following vulnerability has been resolved: esp: do not unref managed frag pages in esp_ssg_unref() esp_ssg_unref() releases the page references held on the source scatterlist after the AEAD operation completes. It calls skb_page_unref() on every frag page for an out-of-place transform (req->src != req->dst), and in the error path of esp_output_tail() (already_unref == true) on the request's own scatterlist. This is wrong when the skb carries managed frags (SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf and the skb does not hold a per-frag page reference; io_uring SEND_ZC with a registered bu
In the Linux kernel, the following vulnerability has been resolved: RDMA/rvt: Return NULL after port allocation failure rvt_alloc_device() deallocates the IB device when its port array cannot be allocated but then returns the pointer to the released allocation. Callers treat any non-NULL value as valid and dereference it, resulting in a use-after-free. Return NULL immediately after deallocation so callers can propagate the allocation failure.
In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Preserve unit 0 on allocation failure hfi1_free_devdata() assumes that the device was inserted into the unit table and unconditionally erases dd->unit. If xa_alloc_irq() fails, the zero-initialized unit remains zero, so full cleanup can remove an unrelated device from index 0. Release only the rdmavt allocation and return immediately while the unit table has not acquired the device.
In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Free RX data on late probe failure hfi1_init_dd() allocates the shared AIP/VNIC RX support before returning. If hfi1_init() or hfi1_register_ib_device() later fails, init_one() tears down the device data without calling hfi1_free_rx(). This leaks netdev_rx and its dummy netdev. Free the RX support after IB unregistration and before postinit_cleanup(), as done on normal device removal.
In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Prevent use-after-free in rdtgroup_kn_put() A struct rdtgroup is reference counted via rdtgroup::waitcount. Callers that need the structure to remain valid across a sleep (while waiting on acquiring rdtgroup_mutex) take a reference with rdtgroup_kn_get() and release it with rdtgroup_kn_put(). The release path is intended to serve as the fallback freer: if the count drops to zero and the group has already been marked RDT_DELETED, rdtgroup_kn_put() frees the structure. The bulk teardown paths free_all_child_rdtgrp() and rmdir_all_sub() resulting from a resctrl d
In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Fix UAF from worker threads when domains are removed The mbm_handle_overflow() and cqm_handle_limbo() workers read event counters and may sleep while doing so. They are scheduled via delayed_work embedded in struct rdt_l3_mon_domain. Architecture allocates and frees these domains from CPU hotplug callbacks under cpus_write_lock(), and the workers acquire cpus_read_lock() to keep the domain alive across their access. A use-after-free can occur when a worker is blocked waiting for cpus_read_lock() while the hotplug core holds cpus_write_lock(): the architecture f
In the Linux kernel, the following vulnerability has been resolved: rpmsg: glink: fix deadlock in endpoint destroy during driver detach During driver detach, the device core holds the device mutex throughout the driver's remove callback chain. When the rpmsg endpoint is destroyed as part of that teardown, the GLINK endpoint destroy implementation attempts to unregister the underlying rpmsg device. That unregistration calls device_del(), which tries to re-acquire the same device mutex already held higher up the stack, causing rmmod to hang indefinitely. The deadlock manifests with the following call chain: [<0>] device_del+0x44/0x414 <-
In the Linux kernel, the following vulnerability has been resolved: hfsplus: validate thread record before delete key rebuild hfsplus_delete_cat() is called with str == NULL when the last open reference to an unlinked HFS+ hardlink backing inode is closed. In that case, the function finds the catalog thread by CNID and rebuilds the catalog key from thread.nodeName. That reconstruction path reads thread.nodeName.length directly from the catalog B-tree into fd.search_key and then copies length * 2 bytes into fd.search_key->cat.name.unicode. It does not first check that the found record is a thread record or that its size matches the thread n
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Publish channel state before callbacks Transport setup can enable callbacks before the setup routine returns. mailbox_chan_setup() registers the mailbox client with mbox_request_channel(), and the mailbox controller startup path can enable interrupt delivery before SCMI mailbox channel state has been published. Similarly, smc_chan_setup() requests the optional A2P completion IRQ before the SMC transport has made its cinfo pointer visible. If a pending or spurious callback fires in those windows, the transport RX callback can dereference a NULL transport
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Quiesce notifications before teardown scmi_notification_exit() clears and releases the notification instance, but transport callbacks can still deliver incoming notifications until the TX/RX channels are freed. During remove, an RX interrupt in that window can enter scmi_notify() while notification state is being torn down and then dereference freed memory. The same ordering exists on the probe error path after notification initialization. The notification late-init worker has a separate lifetime issue: protocol event registration queues ni->init_work o
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix SCMI device destroy lifetimes scmi_child_dev_find() drops the reference returned by device_find_child() before returning the scmi_device pointer. A concurrent unregister can then release the device while the destroy path is still using the returned pointer. Make the lookup helper return the device_find_child() reference and keep it until scmi_device_destroy() has finished unregistering the child. Also split device_unregister() in __scmi_device_destroy() so the SCMI bus ID is not made reusable until after device_del() has removed the old scmi_dev.N
In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-irqc: Fix generic interrupt chip leak on remove The driver allocates domain generic chips probe. However, on driver removal, the generic chips are not automatically freed when the interrupt domain is removed because the domain flags do not include IRQ_DOMAIN_FLAG_DESTROY_GC. This causes both the domain generic chips structure and the associated generic chips to be leaked. Additionally, the generic chips remain on the global list and may later be accessed by generic interrupt chip suspend, resume, or shutdown callbacks after the driver has been removed, pote
In the Linux kernel, the following vulnerability has been resolved: drm/bridge: tc358767: clamp the reported AUX read size to the request tc_aux_transfer() clamps an AUX read to the payload limit: size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size); After the transfer it replaces size with the byte count the controller reports in AUX_BYTES: if (size) size = FIELD_GET(AUX_BYTES, auxstatus); AUX_BYTES is GENMASK(15, 8), so it can be up to 255. Nothing clamps it back to the request. tc_aux_read_data() reads that many bytes into the 16-byte auxrdata stack buffer, then copies them into the caller buffer. A reported count
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments Make sure we don't end-up with a num_frags = 0 situation. For that, check that the required size is not 0 and put a checker on num_frags as well.
In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Avoid stack over-read in debug output helpers host1x_debug_output() and host1x_debug_cont() used vsnprintf(), which returns the length the formatted string would have reached with an unbounded buffer. That return value was passed straight to o->fn as the number of bytes to emit. This could cause a read past end of the output buffer if a call to host1x_debug_* produced a string longer than 256 bytes. This only affected the debugfs files as the printk debug sink ignores the number of bytes. In practice, this is very unlikely to occur. Fix by switching to vscnpr
In the Linux kernel, the following vulnerability has been resolved: drm/msm: Only fini scheduler after successful init msm_ringbuffer_new() destroys a partially initialized ring through msm_ringbuffer_destroy() when an allocation or scheduler setup step fails. If drm_sched_init() fails before it finishes initializing the scheduler, the failure path still calls drm_sched_fini(). That teardown path assumes the scheduler work items, lists, and workqueue state were initialized. Track successful scheduler initialization and call drm_sched_fini() only after drm_sched_init() returned 0. This issue was found by a static analysis checker and conf
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: remove broken string configfs attributes The UAC1_STR_ATTRIBUTE macro defines configfs show/store handlers for the fn_play, fn_cap, and fn_cntl string options. The store function contains an inverted null check on the kstrndup() return value. This means every write attempt returns -ENOMEM on success and dereferences a NULL pointer on allocation failure. The attributes have been broken and unused for many years. Remove the UAC1_STR_ATTRIBUTE macro and the three attributes it generated. The internal defaults (FILE_PCM_PLAYBACK, FILE_PCM_CAPTURE,
Check your installed stack and versions against the current vulnerability feeds.