PatchFirst · Latest vulnerabilities
Vulnerabilities published for linux-realtime-6.8 in the last 30 days: 759. Listed in the KEV catalogue: 0.
Vulnerabilities: 9429
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx6: fix firmware leak on teardown The firmware requested in gfx_v6_0_init_microcode() is not released when the GFX block is torn down, leaking the firmware resources. Add gfx_v6_0_free_microcode() and call it from gfx_v6_0_sw_fini() to release the PFP, ME, CE and RLC firmware. (cherry picked from commit 386e81346f95ab0be5a82c5535de932e7a456924)
In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add missing IS_ERR check for ovl_adaptor platform device platform_device_register_data() can fail and return an ERR_PTR, but the return value is used without checking, leading to an invalid pointer being stored in ddp_comp[].dev and passed to component_match_add() and mtk_ddp_comp_init(), which could result in a kernel crash. Add an IS_ERR() check to jump to the error handling path on failure.
In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix ovl adaptor platform device leak mtk_drm_probe() creates an OVL adaptor platform device with platform_device_register_data() when the display pipeline requires the OVL adaptor. If a later initialization step fails, the probe error path releases the DRM resources without unregistering the already registered OVL adaptor device. The normal remove path likewise leaves the device registered after the DRM driver is unbound. Keep track of whether the OVL adaptor was successfully registered and unregister it on probe failure. Also recover the platform device fro
In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix pdev reference leak in mtk_drm_bind() When the device is not the mmsys master, mtk_drm_bind() returns early after taking a reference on the disp-mutex device via of_find_device_by_node(), without ever dropping it: mtk_drm_unbind() only puts mutex_dev for the master. Drop the reference before returning from the non-master path.
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix IP instance memory leak on kobject add failure amdgpu_discovery_sysfs_ips() allocates ip_hw_instance with kzalloc_flex() and initializes its embedded kobject before calling kobject_add(). If kobject_add() fails, the return value is ignored and execution continues without dropping the initial kobject reference. The failed kobject is not retained in the kset list, so the normal sysfs teardown path cannot find it. As a result, ip_hw_instance_release() is never called and the ip_hw_instance allocation is leaked. Call kobject_put() when kobject_add() fails so t
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix ACP MFD device leak on init failure acp_hw_init() registers ACP child devices with mfd_add_devices() before attaching them to the ACP power domain and initializing the hardware. If attaching a child to the power domain fails, or if the ACP reset or clock enable operation times out, the failure path frees only the source cell, resource, and platform-data allocations. The child platform devices already registered by mfd_add_devices() remain registered and are never released. Remove the children from the power domain and unregister the MFD devices on failures
In the Linux kernel, the following vulnerability has been resolved: binder: fix is_failure flag for superseded transaction cleanup When a TF_UPDATE_TXN transaction supersedes a pending async transaction, binder_release_entire_buffer() is called with is_failure=false. Since the superseded transaction was never delivered, binder_apply_fd_fixups() was never called and no fds were installed in the target process. With is_failure=false, the BINDER_TYPE_FDA cleanup handler interprets stale buffer contents as installed fd numbers and passes them to binder_deferred_fd_close(), closing unrelated file descriptors. Pass is_failure=true since the tra
In the Linux kernel, the following vulnerability has been resolved: binder: fix leaked fd fixups on TF_UPDATE_TXN supersede When a TF_UPDATE_TXN transaction supersedes a pending async transaction in a frozen process, the outdated transaction is freed with kfree() directly. This skips binder_free_txn_fixups(), leaking all binder_txn_fd_fixup entries and their fget()'d struct file references. The leaked file refcounts never reach zero, so the struct file objects are permanently pinned in memory. They survive process exit and accumulate across invocations until file-max exhaustion. Every other transaction cleanup path (binder_free_transactio
In the Linux kernel, the following vulnerability has been resolved: nitro_enclaves: fix use-after-free on SLOT_ALLOC failure When ne_create_vm_ioctl() fails the SLOT_ALLOC request after anon_inode_getfile() has succeeded, the error path calls fput(enclave_file) and then frees ne_enclave. In normal userspace context, fput() defers the final __fput() via task_work. ne_enclave_release() therefore runs after ne_enclave has already been freed and dereferences ne_enclave->slot_uid, causing a use-after-free: KASAN: slab-use-after-free in ne_enclave_release. The enclave has no slot allocated and is not yet linked into the enclaves list on this er
In the Linux kernel, the following vulnerability has been resolved: USB: cdc-acm: skip URB restart in port_shutdown if disconnected acm_port_shutdown() is called from the tty-port machinery whenever the last user closes the port. acm_disconnect() sets acm->disconnected and calls tty_port_tty_vhangup(), which eventually triggers port_shutdown(). At that point acm_disconnect() has already called acm_poison_urbs() and is about to free the control and read URBs. However, acm_port_shutdown() unconditionally calls acm_unpoison_urbs() and, when the ALWAYS_POLL_CTRL quirk is set, immediately re-submits the ctrlurb and all read URBs. If the concu
In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix port tear down use-after-free Some drivers for multiport devices access port driver data from completion handlers of shared URBs submitted at attach() or first open() and stopped at disconnect() or last close(), respectively. A simple NULL check before accessing the driver data makes sure that a port state container has at least been allocated, but a completion handler can still race with port tear down. Reorder the disconnect handling so that ports are not deregistered (and their driver data freed) until after all ports have been hung up and the driver d
In the Linux kernel, the following vulnerability has been resolved: usb: storage: sierra_ms: reject short SWoC info transfers sierra_get_swoc_info() requests sizeof(struct swoc_info) (60) bytes from the device via usb_control_msg(), but its callers only treat a negative return value as failure. A device that answers the vendor-specific GetSwocInfo request with a short IN transfer is therefore accepted, leaving the tail of the freshly allocated (kmalloc(), non-zeroing) swoc_info buffer uninitialized. truinst_show() subsequently prints swocInfo->rev, swocInfo->LinuxSKU and swocInfo->LinuxVer from that buffer into the world-readable (0444) "t
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: Fix the jack descriptor array sizes The jack in/out descriptor arrays in struct f_midi2_usb_config have the size of MAX_CABLES, which look reasonable -- but it turned out to be incorrect. Namely, the entries for those arrays are added from both inputs and outputs, hence for each loop cycle, it adds two, ended up with as twice as the expected size. This inconsistency may result in potential OOB when a large number of jacks are set up via configfs, although the max number of cables (the loop count) is limited to MAX_CABLES. For addressing it, correct th
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd generic_set_cmd() and generic_get_cmd() use the low nibble of ctrl->bRequest as an index into con->data[]: u8 cmd = (ctrl->bRequest & 0x0F); /* 0 .. 15 */ ... con->data[cmd] = value; /* OOB when cmd >= 5 */ struct usb_audio_control (include/linux/usb/audio.h) declares data as a 5-element array, so indices 5 through 15 write (or read) up to 44 bytes past the end of the array on the heap. A malicious USB host can craft a class-specific SET_CUR / GET_CUR request with an arbi
In the Linux kernel, the following vulnerability has been resolved: usb: typec: anx7411 - stop the IRQ before destroying the workqueue The IRQ is devm-managed, so it can still queue plat->work while remove() is tearing the queue down. Disable it first.
In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: fix IRQ storm on invalid event buffer count When dwc3_check_event_buf() reads a GEVNTCOUNT value exceeding the event buffer length, commit 63ccd26cd1f6 ("usb: dwc3: gadget: check that event count does not exceed event buffer length") returns IRQ_NONE without writing back GEVNTCOUNT. Since the DWC3 interrupt is level-triggered, the uncleared IRQ source keeps the line asserted, causing a tight IRQ storm that accumulates 99,900 unhandled interrupts and triggers spurious.c:184 BUG -> kernel panic. The resulting call stack: __report_bad_irq+0xac/0xc8 note
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: aspeed-vhub: cancel wake work on device removal wake_work is armed from the gadget .wakeup callback to resume suspended downstream ports, and it is never cancelled in ast_vhub_remove(), so a work item queued before or during removal can run after devm has freed vhub and its ports, a use-after-free. Cancelling the work alone is not sufficient: usb_gadget_wakeup() takes no lock and the unbind path never clears wakeup_en, so a remote-wakeup request in flight on another CPU can re-arm the work after the cancel and before vhub is freed. ast_vhub_del_dev() already
In the Linux kernel, the following vulnerability has been resolved: USB: gadget: dummy-hcd: Fix wait for outstanding request completions The dummy-hcd driver emulates synchronize_irq() by waiting until its private callback_usage counter drops to 0 (with the private lock not held). This counter is incremented whenever a gadget driver callback occurs (which requires the private lock to be dropped), but not when a request completion handler is called. This is an oversight. Request completion is triggered by timer interrupts (emulating device IRQs in a real UDC), and the interrupt handlers are supposed to have completed when the synchronize_
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix NULL pointer dereference in FUNCTIONFS_ENDPOINT_DESC When user space sets up FunctionFS with only full-speed descriptors (e.g., flags = FUNCTIONFS_HAS_FS_DESC) and the gadget operates at a higher speed (such as USB_SPEED_HIGH or USB_SPEED_SUPER), config_ep_by_speed() detects that the function lacks descriptors for the current speed, logs a warning, and falls back to full-speed descriptors. The endpoint is then successfully enabled via usb_ep_enable(), and epfile->ep becomes valid. However, when user space subsequently issues the FUNCTIONFS_ENDPOINT_D
In the Linux kernel, the following vulnerability has been resolved: usb: core: clear both ep_in and ep_out for non-ep0 control endpoints In usb_enable_endpoint(), non-zero control endpoints (where usb_endpoint_xfer_control(&ep->desc) is true) populate both dev->ep_in[epnum] and dev->ep_out[epnum] with the same struct usb_host_endpoint pointer. However, usb_disable_endpoint() only clears either dev->ep_out[epnum] or dev->ep_in[epnum] depending on the direction bit of epaddr when reset_hardware is set, leaving the opposite direction's array slot pointing to the disabled/freed endpoint. Clear both dev->ep_out[epnum] and dev->ep_in[epnum] whe
Check your installed stack and versions against the current vulnerability feeds.