PatchFirst · Latest vulnerabilities
Vulnerabilities published for linux-ibm-5.15 in the last 30 days: 0. Listed in the KEV catalogue: 0.
Vulnerabilities: 2540
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix some memleaks in gssx_dec_option_array The creds and oa->data need to be freed in the error-handling paths after their allocation. So this patch add these deallocations in the corresponding paths.
In the Linux kernel, the following vulnerability has been resolved: media: v4l2-tpg: fix some memleaks in tpg_alloc In tpg_alloc, resources should be deallocated in each and every error-handling paths, since they are allocated in for statements. Otherwise there would be memleaks because tpg_free is called only when tpg_alloc return 0.
In the Linux kernel, the following vulnerability has been resolved: media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity The entity->name (i.e. name) is allocated in v4l2_m2m_register_entity but isn't freed in its following error-handling paths. This patch adds such deallocation to prevent memleak of entity->name.
In the Linux kernel, the following vulnerability has been resolved: media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak Free the memory allocated in v4l2_ctrl_handler_init on release.
In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: avoid stack overflow warnings with clang A previous patch worked around a KASAN issue in stv0367, now a similar problem showed up with clang: drivers/media/dvb-frontends/stv0367.c:1222:12: error: stack frame size (3624) exceeds limit (2048) in 'stv0367ter_set_frontend' [-Werror,-Wframe-larger-than] 1214 | static int stv0367ter_set_frontend(struct dvb_frontend *fe) Rework the stv0367_writereg() function to be simpler and mark both register access functions as noinline_for_stack so the temporary i2c_msg structures do not get duplicated on the stack wh
In the Linux kernel, the following vulnerability has been resolved: media: go7007: fix a memleak in go7007_load_encoder In go7007_load_encoder, bounce(i.e. go->boot_fw), is allocated without a deallocation thereafter. After the following call chain: saa7134_go7007_init |-> go7007_boot_encoder |-> go7007_load_encoder |-> kfree(go) go is freed and thus bounce is leaked.
In the Linux kernel, the following vulnerability has been resolved: media: ttpci: fix two memleaks in budget_av_attach When saa7146_register_device and saa7146_vv_init fails, budget_av_attach should free the resources it allocates, like the error-handling of ttpci_budget_init does. Besides, there are two fixme comment refers to such deallocations.
In the Linux kernel, the following vulnerability has been resolved: media: usbtv: Remove useless locks in usbtv_video_free() Remove locks calls in usbtv_video_free() because are useless and may led to a deadlock as reported here: https://syzkaller.appspot.com/x/bisect.txt?x=166dc872180000 Also remove usbtv_stop() call since it will be called when unregistering the device. Before 'c838530d230b' this issue would only be noticed if you disconnect while streaming and now it is noticeable even when disconnecting while not streaming. [hverkuil: fix minor spelling mistake in log message]
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not compare internal table flags on updates Restore skipping transaction if table update does not modify flags.
In the Linux kernel, the following vulnerability has been resolved: NTB: fix possible name leak in ntb_register_device() If device_register() fails in ntb_register_device(), the device name allocated by dev_set_name() should be freed. As per the comment in device_register(), callers should use put_device() to give up the reference in the error path. So fix this by calling put_device() in the error path so that the name can be freed in kobject_cleanup(). As a result of this, put_device() in the error path of ntb_register_device() is removed and the actual error is returned. [mani: reworded commit message]
In the Linux kernel, the following vulnerability has been resolved: USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command The isd200 sub-driver in usb-storage uses the HEADS and SECTORS values in the ATA ID information to calculate cylinder and head values when creating a CDB for READ or WRITE commands. The calculation involves division and modulus operations, which will cause a crash if either of these values is 0. While this never happens with a genuine device, it could happen with a flawed or subversive emulation, as reported by the syzbot fuzzer. Protect against this possibility by refusing to bind to the device if either
In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix double module refcount decrement Once the discipline is associated with the device, deleting the device takes care of decrementing the module's refcount. Doing it manually on this error path causes refcount to artificially decrease on each error while it should just stay the same.
In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix RCU usage in connect path With lockdep enabled, calls to the connect function from cfg802.11 layer lead to the following warning: ============================= WARNING: suspicious RCU usage 6.7.0-rc1-wt+ #333 Not tainted ----------------------------- drivers/net/wireless/microchip/wilc1000/hif.c:386 suspicious rcu_dereference_check() usage! [...] stack backtrace: CPU: 0 PID: 100 Comm: wpa_supplicant Not tainted 6.7.0-rc1-wt+ #333 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_
In the Linux kernel, the following vulnerability has been resolved: wifi: rtl8xxxu: add cancel_work_sync() for c2hcmd_work The workqueue might still be running, when the driver is stopped. To avoid a use-after-free, call cancel_work_sync() in rtl8xxxu_stop().
In the Linux kernel, the following vulnerability has been resolved: cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it and return 0 in case of error. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: net: phy: fix phy_get_internal_delay accessing an empty array The phy_get_internal_delay function could try to access to an empty array in the case that the driver is calling phy_get_internal_delay without defining delay_values and rx-internal-delay-ps or tx-internal-delay-ps is defined to 0 in the device-tree. This will lead to "unable to handle kernel NULL pointer dereference at virtual address 0". To avoid this kernel oops, the test should be delay >= 0. As there is already delay < 0 test just before, the test could only be size == 0.
In the Linux kernel, the following vulnerability has been resolved: nfp: flower: handle acti_netdevs allocation failure The kmalloc_array() in nfp_fl_lag_do_work() will return null, if the physical memory has run out. As a result, if we dereference the acti_netdevs, the null pointer dereference bugs will happen. This patch adds a check to judge whether allocation failure occurs. If it happens, the delayed work will be rescheduled and try again.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()' Tell snprintf() to store at most 10 bytes in the output buffer instead of 30. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1508 dp_dsc_clock_en_read() error: snprintf() is printing too much 30 vs 10
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential NULL pointer dereferences in 'dcn10_set_output_transfer_func()' The 'stream' pointer is used in dcn10_set_output_transfer_func() before the check if 'stream' is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875)
In the Linux kernel, the following vulnerability has been resolved: media: edia: dvbdev: fix a use-after-free In dvb_register_device, *pdvbdev is set equal to dvbdev, which is freed in several error-handling paths. However, *pdvbdev is not set to NULL after dvbdev's deallocation, causing use-after-frees in many places, for example, in the following call chain: budget_register |-> dvb_dmxdev_init |-> dvb_register_device |-> dvb_dmxdev_release |-> dvb_unregister_device |-> dvb_remove_device |-> dvb_device_put |-> kref_put When calling dvb_unregister_device, dmxd
Check your installed stack and versions against the current vulnerability feeds.