Check all ancestor namespace transitions when rendering raw text in html in golang.org/x/net
In childTextNodesAreLiteral, walking up the tree previously stopped at the nearest foreign ancestor once an HTML integration point was found. However, that integration point may itself be a descendant of an element that was foster-parented into a foreign namespace (such as <mglyph> or <malignmark> fostered under <mtext>), causing a parser to resolve the subtree in a different foreign namespace upon re-parsing the rendered output. Continue walking the full ancestor chain and verify that every transition from a non-empty namespace occurs at an HTML integration point before emitting literal text.
Avoid quadratic complexity when coalescing text nodes in html in golang.org/x/net
When coalescing adjacent text nodes in addText and fosterParent, appending to an existing TextNode's Data via string concatenation (n.Data += text) reallocated and copied the accumulated string on every token. Inputs containing many short text runs separated by ignored end tags (such as "a</x>") caused O(n^2) allocations and byte copies. Accumulate coalesced text in per-node byte slices during parsing and materialize Data strings once at the end of parse.
HTTP/2 server crash due to HPACK encoder race in net/http
HTTP/2 servers could end up crashing due to inadvertently modifying its HPACK encoder concurrently. This happens because the server modifies the HPACK encoder from two goroutines without synchronization: one uses the encoder to encode a HEADERS frame as part of a response sent to a client and the other modifies the encoder's table size when handling a SETTINGS frame containing SETTINGS_HEADER_TABLE_SIZE that a client sends. A malicious client can repeatedly send a request while changing the header table size to crash the server.
Double flow control refund on HTTP/2 server streams in net/http
The HTTP/2 server can refund connection-level flow control twice for the same data: Once when a client resets a stream (refunding data for any sent-but-unread portion of the stream), and again when a request handler reads the buffered data. A malicious client can exploit this to bypass the configured connection-level flow control limit (MaxReceiveBufferPerConnection). Total buffered data is still limited by the concurrent stream limit and stream-level flow control.
Excessive CPU consumption from repeated initial window changes in net/http
A malicious HTTP/2 peer can cause excessive CPU consumption in the client or server by opening a large number of streams and then sending many small SETTINGS frames containing SETTINGS_INITIAL_WINDOW_SIZE values.
HTTP/2 transport accepts malformed framing-related headers in net/http
Historically, we have been rather lax about malformed framing-related headers in our HTTP/2 implementation, as they cannot interfere with HTTP/2 framing. However, this makes it possible for our HTTP/2 implementation to forward responses containing such headers to an HTTP/1 client when acting as a reverse proxy. If the HTTP/1 client also does not behave strictly enough, this can result in response smuggling.
HTTP/2 server memory exhaustion due to Trailer headers in net/http
When "Trailer" headers are sent by a client, the HTTP server internally uses the header values to populate the Request.Trailer map passed to the server handler. Because Request.Trailer is a map, each entry incurs memory overhead. For HTTP/2 servers, a malicious client can exploit this by sending a "Trailer" header that declares a large number of fields, causing the server to allocate a disproportionate amount of memory while bypassing Server.MaxHeaderValueCount and Server.MaxHeaderBytes limits. This exploit is not applicable for HTTP/1 servers, which do not support multiplexing a large number of requests over one TCP connection, and whose Ser
LXD client recursive file pull allows directory escape via malicious VM agent
Improper link resolution in the recursive file pull feature of the LXD CLI client in Canonical LXD versions 4.0.2 up to 6.9 (fixed in 4.0.14, 5.0.10 and 5.21.8) on Linux allows an attacker with root access inside a virtual machine to write attacker-controlled files or directory trees to arbitrary paths on the client host, with the operator's privileges. The attacker does this by using a modified lxd-agent that returns inconsistent SFTP directory listings and Lstat results.
Arbitrary file write on LXD host via symlink in migration stream
Improper link resolution in the migration receive path in Canonical LXD versions 4.0 and later (fixed in 4.0.14, 5.0.10, 5.21.8 and 6.10) on Linux allows an authenticated client that can create instances or custom storage volumes in a project, or a malicious migration source server, to write attacker-controlled files to arbitrary paths on the target host as root, leading to full host compromise. The attacker does this with a crafted rsync or btrfs send stream that plants a symlink in the transferred volume, such as rootfs or root.img, and then writes through it.
Incorrect authorization in LXD storage volume API allows reading volumes from other projects
Incorrect authorization in the custom storage volume creation endpoint in Canonical LXD versions 5.0.0 and later (fixed in 5.0.10, 5.21.8 and 6.10) on Linux allows an authenticated client with permission to create custom volumes in a project to copy, and so read, any custom storage volume from any other project on the server, including its snapshots and configuration. The client does this with a crafted request that sets a source volume and source.project but omits source.type.
Path traversal in LXD btrfs storage driver allows arbitrary file deletion and write on host as root
Path traversal in the btrfs storage driver in Canonical LXD versions 4.0.2 and later (fixed in 4.0.14, 5.0.10, 5.21.8 and 6.10) on Linux allows an authenticated client with permission to create instances in a project to delete arbitrary files on the host as root. On hosts whose root filesystem is btrfs, the client can also place attacker-controlled content at arbitrary host paths, leading to full host compromise. The client does this with a crafted subvolume path containing ../ sequences, sent in either of two ways: in the optimized_header.yaml of an optimized btrfs backup, or in the btrfs migration header sent by a malicious migration source
Path traversal via Btrfs optimized-backup subvolumes[].path enables root file/dir manipulation in LXD
Path traversal in the Btrfs storage driver (unpackVolume) in Canonical LXD on Linux allows an authenticated user with instance creation privileges to delete or replace arbitrary files and directories on the host filesystem as root via a crafted subvolumes[].path entry in backup/optimized_header.yaml during a btrfs optimized backup import.
LXD Cross-Project Private Image Theft via Unsanitized GetImageFromAnyProject Local Reuse
Missing Authorization in imageDownload in Canonical LXD before 5.0.10, 5.21.8, and 6.10 on Linux allows a project-restricted client to access private images from other projects via local fingerprint reuse during image or instance import requests.
CLI Path Traversal via Content-Disposition in LXD Image Export/Copy
Path traversal in the CLI client image export and copy functionality in Canonical LXD from 4.0.2 before 4.0.14, 5.0.10, 5.21.8, and 6.10 on all platforms allows a remote malicious or machine-in-the-middle image server to overwrite arbitrary local files and execute code on the client system via a crafted Content-Disposition header filename parameter during unified image export or copy operations into a local directory target.
A path traversal vulnerability in LXD's instance template processing allows an attacker with container edit permissions, or any user launching a crafted image, to overwrite arbitrary files on the host system as root. When processing target template paths specified in metadata.yaml, LXD validates the path against a confined os.Root directory handle but subsequently opens and creates the file using os.Create with an unconfined string path. This discrepancy between path resolution checks and file creation allows an attacker to escape directory confinement, overwrite root-owned host files, and achieve host root code execution.
Incus has a project restriction bypass in instance copy across projects
Incus is a system container and virtual machine manager. Prior to version 7.2.0, missing authorization checks exist for instance copying where an attacker knowing the name of a project that they don't have access to and the name of an instance in that project can copy the instance to a new project. This issue could allow an attacker to access secrets in instances they are not authorized to access. Version 7.2.0 patches the issue.
Incus has a project restriction bypass for custom volume copy across projects
Incus is a system container and virtual machine manager. Prior to version 7.2.0, missing authorization checks exist for custom volume copying where an attacker knowing the name of a project that they don't have access to and the name of a custom volume in that project can copy the custom volume to a new project. This issue could allow an attacker to access secrets in custom volumes they are not authorized to access. Version 7.2.0 patches the issue.
Incus has an arbitrary file write on its client due to trusted image hash
Incus is a system container and virtual machine manager. Prior to version 7.2.0, an arbitrary file write exists in the Incus client when a malicious image server returns a crafted `Incus-Image-Hash` header. This can lead to arbitrary command execution as root on the server. Version 7.2.0 patches the issue.
Incus has an argument injection in backup compression algorithm leading to AFW and ACE
Incus is a system container and virtual machine manager. Prior to version 7.1.0, improper validation of user-provided backup compression algorithm leads to argument injection in the constructed command line. This leads to an arbitrary file write on the host, possibly leading to arbitrary command execution. Version 7.1.0 patches the issue.
Incus has arbitrary file read+write on host via templates/ symlink in malicious image
Incus is a system container and virtual machine manager. Prior to version 7.2.0, a specially crafted image or instance backup can be used to read or create/write arbitrary files on the host; possibly leading to arbitrary command execution. Version 7.2.0 patches the issue.