OpenEXR: Integer overflow and uninitialized pointer cause invalid delete in OpenEXRUtil image resize
OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.12, a reachable assertion failure in the HTJ2K decode path allows a crafted HTJ2K-compressed EXR file to cause an unconditional process abort in any application that calls exr_start_read() on untrusted input, resulting in denial of service. The crash is triggered by a QCD marker whose lower five bits are zero, which OpenEXR passes into the vendored OpenJPH library while constructing the codestream and evaluating its quantization delta parameters. OpenJPH uses an assertion rather than a r
OpenEXR: Unhandled assert abort in HTJ2K decoder via crafted QCD marker (DoS)
OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.12, a crafted HTJ2K-compressed EXR file causes an unconditional process abort in any application that calls exr_start_read() on untrusted input, resulting in denial of service. The crash is triggered by a QCD marker whose lower five bits are zero, which OpenEXR passes into the vendored OpenJPH library while constructing the codestream and evaluating its quantization delta parameters. OpenJPH uses an assertion rather than a recoverable error to validate those bits, so any invalid value ca
OpenEXR: HTJ2K SIZ image-offset gap stack buffer overflow
OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. From version 3.4.0 through 3.4.13, a crafted HTJ2K-compressed EXR can crash OpenEXR during normal decode. An HTJ2K-compressed EXR whose JPEG 2000 SIZ fields place the first tile outside the visible image can reach invalid tile and codeblock geometry in the vendored OpenJPH AVX2 decoder, causing a stack out-of-bounds write and denial of service. OpenEXR's HTJ2K path validates the decoded codestream dimensions against the EXR chunk size, but it does not reject SIZ image-offset/tile-grid geometry where the first tile do
OpenEXR HTJ2K decoder heap buffer over-read in ht_undo_impl() (DoS)
OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.11, the HTJ2K (High-Throughput JPEG 2000) decoder, ht_undo_impl() in OpenEXRCore is vulnerable to a heap-buffer-overflow READ. The ht_undo_imp function copies decoded pixels out of a per-line OpenJPH buffer using the EXR channel's declared width as the iteration count. The codestream embedded in the EXR chunk can declare different (smaller) tile/line dimensions than the EXR header advertises, but ht_undo_impl() does not validate this — it pulls width 32-bit samples from cur_line->i32[]
OpenEXR: Integer overflow in the HTJ2K decoder leads to heap-buffer-overflow
OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.11, an integer overflow in ht_undo_impl() in src/lib/OpenEXRCore/internal_ht.cpp leads to a heap-buffer overflow when decoding a crafted HTJ2K-compressed EXR file. decode->channels[i].width (int32_t) is multiplied by bytes_per_element in 32-bit signed arithmetic. With large widths (e.g., >= 536870912 for FLOAT data), this overflows, producing a corrupted offset that is later used for pointer arithmetic and can cause a heap out-of-bounds write. The same unchecked multiplication pattern ap
OpenEXR: Shift exponent overflow in `readVariableLengthInteger()` (`ImfIDManifest.cpp`)
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, readVariableLengthInteger() decodes a variable-length integer from untrusted EXR input without bounding the shift count. After enough continuation bytes, the code executes a left shift by 70 on a 64-bit value, which is undefined behavior. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11.
OpenEXR: Out-of-bounds read in `IDManifest::init()` during prefix expansion
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, IDManifest::init() reconstructs strings from a prefix-compressed representation. If the previous string is longer than 255 bytes, the next string is expected to begin with a 2-byte prefix length. The code reads stringList[i][0] and stringList[i][1] without checking that the current string has at least two bytes. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11.
OpenEXR is Vulnerable to Integer overflow in ImageChannel::resize leads to heap OOB write via OpenEXRUtil public API
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, there is an integer overflow in ImageChannel::resize that leads to heap OOB write via OpenEXRUtil public API. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11.
OpenEXR has integer overflow in DWA decoder outBufferEnd pointer arithmetic (missed variant of CVE-2026-34589)
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In versions 3.4.0 through 3.4.9, 3.3.0 through 3.3.9, and 3.2.0 through 3.2.7, `internal_dwa_compressor.h:1040` performs `chan->width * chan->bytes_per_element` in `int32` arithmetic without a `(size_t)` cast. This is the same overflow pattern fixed in other decoders by CVE-2026-34589/34588/34544, but this line was missed. Versions 3.4.10, 3.3.10, and 3.2.8 contain a fix that addresses `internal_dwa_compressor.h:1040`.
OpenEXR has integer overflow in DWA setupChannelData planarUncRle pointer arithmetic (missed variant of CVE-2026-34589)
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In versions 3.4.0 through 3.4.9, 3.3.0 through 3.3.9, and 3.2.0 through 3.2.7, `internal_dwa_compressor.h:1722` performs `curc->width * curc->height` in `int32` arithmetic without a `(size_t)` cast. This is the same overflow pattern fixed in other locations by the recent CVE-2026-34589 batch, but this line was missed. Versions 3.4.10, 3.3.10, and 3.2.8 contain a fix that addresses `internal_dwa_compressor.h:1722`.
OpenEXR has HTJ2K Signed Integer Overflow in ht_undo_impl()
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. Versions 3.4.0 through 3.4.9 have a signed integer overflow vulnerability in OpenEXR's HTJ2K (High-Throughput JPEG 2000) decompression path. The `ht_undo_impl()` function in `src/lib/OpenEXRCore/internal_ht.cpp` accumulates a bytes-per-line value (`bpl`) using a 32-bit signed integer with no overflow guard. A crafted EXR file with 16,385 FLOAT channels at the HTJ2K maximum width of 32,767 causes `bpl` to overflow `INT_MAX`, producing undefined behavior confirmed by UBSan. On an
allocator-permissive h
OpenEXR: DWA Lossy Decoder Heap Out-of-Bounds Write
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, the DWA lossy decoder constructs temporary per-component block pointers using signed 32-bit arithmetic. For a large enough width, the calculation overflows and later decoder stores operate on a wrapped pointer outside the allocated rowBlock backing store. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.
OpenEXR has a signed 32-bit Overflow in PIZ Decoder Leads to OOB Read/Write
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.1.0 to before 3.2.7, 3.3.9, and 3.4.9, internal_exr_undo_piz() advances the working wavelet pointer with signed 32-bit arithmetic. Because nx, ny, and wcount are int, a crafted EXR file can make this product overflow and wrap. The next channel then decodes from an incorrect address. The wavelet decode path operates in place, so this yields both out-of-bounds reads and out-of-bounds writes. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.
OpenEXR has a signed integer overflow (undefined behavior) in undo_pxr24_impl may allow bounds-check bypass in PXR24 decompression
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, a signed integer overflow exists in undo_pxr24_impl() in src/lib/OpenEXRCore/internal_pxr24.c at line 377. The expression (uint64_t)(w * 3) computes w * 3 as a signed 32-bit integer before casting to uint64_t. When w is large, this multiplication constitutes undefined behavior under the C standard. On tested builds (clang/gcc without sanitizers), two's-complement wraparound commonly occurs, and for specific values of w the wrapped result is a small positi
OpenEXR has a misaligned write in LossyDctDecoder_execute leading to undefined behavior (DWA/DWAB decompression)
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, a misaligned memory write vulnerability exists in LossyDctDecoder_execute() in src/lib/OpenEXRCore/internal_dwa_decoder.h:749. When decoding a DWA or DWAB-compressed EXR file containing a FLOAT-type channel, the decoder performs an in-place HALF→FLOAT conversion by casting an unaligned uint8_t * row pointer to float * and writing through it. Because the row buffer may not be 4-byte aligned, this constitutes undefined behavior under the C standard and cras
OpenEXR has a signed integer overflow in generic_unpack() when parsing EXR files with crafted negative dataWindow.min.x
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.4.0 to before 3.4.9, a missing bounds check on the dataWindow attribute in EXR file headers allows an attacker to trigger a signed integer overflow in generic_unpack(). By setting dataWindow.min.x to a large negative value, OpenEXRCore computes an enormous image width, which is later used in a signed integer multiplication that overflows, causing the process to terminate with SIGILL via UBSan. This vulnerability is fixed in 3.4.9.
OpenEXR: Heap information disclosure in PXR24 decompression via unchecked decompressed size (undo_pxr24_impl)
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From version 3.4.0 to before version 3.4.8, sensitive information from heap memory may be leaked through the decoded pixel data (information disclosure). This occurs under default settings; simply reading a malicious EXR file is sufficient to trigger the issue, without any user interaction. This issue has been patched in version 3.4.8.
OpenEXR: integer overflow to OOB write in uncompress_b44_impl()
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From version 3.4.0 to before version 3.4.8, a crafted B44 or B44A EXR file can cause an out-of-bounds write in any application that decodes it via exr_decoding_run(). Consequences range from immediate crash (most likely) to corruption of adjacent heap allocations (layout-dependent). This issue has been patched in version 3.4.8.
OpenEXR: integer overflow lead to OOB in HTJ2K decoder
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From version 3.4.0 to before version 3.4.7, an attacker providing a crafted .exr file with HTJ2K compression and a channel width of 32768 can write controlled data beyond the output heap buffer in any application that decodes EXR images. The write primitive is 2 bytes per overflow iteration or 4 bytes (by another path), repeating for each additional pixel past the overflow point. In this context, a heap write overflow can lead to remote code execution on systems. This issue has been patched in versio
Academy Software Foundation OpenEXR EXR File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability
Academy Software Foundation OpenEXR EXR File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Academy Software Foundation OpenEXR. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of EXR files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context