In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix re-decryption of RESPONSE packets
If a RESPONSE packet gets a temporary failure during processing, it may end
up in a partially decrypted state - and then get requeued for a retry.
Fix this by just discarding the packet; we will send another CHALLENGE
packet and thereby elicit a further response. Similarly, discard an
incoming CHALLENGE packet if we get an error whilst generating a RESPONSE;
the server will send another CHALLENGE.
ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O
In the Linux kernel, the following vulnerability has been resolved:
ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O
When allocating blocks during within-EOF DIO and writeback with
dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an
existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was
set when calling ext4_split_convert_extents(), which may potentially
result in stale data issues.
Assume we have an unwritten extent, and then DIO writes the second half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| --
In the Linux kernel, the following vulnerability has been resolved:
nfsd: never defer requests during idmap lookup
During v4 request compound arg decoding, some ops (e.g. SETATTR)
can trigger idmap lookup upcalls. When those upcall responses get
delayed beyond the allowed time limit, cache_check() will mark the
request for deferral and cause it to be dropped.
This prevents nfs4svc_encode_compoundres from being executed, and
thus the session slot flag NFSD4_SLOT_INUSE never gets cleared.
Subsequent client requests will fail with NFSERR_JUKEBOX, given
that the slot will be marked as in-use, making the SEQUENCE op
fail.
Fix this by making su
s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
`css_alloc_subchannel()` calls `device_initialize()` before setting up
the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails,
the error path frees the subchannel structure directly, bypassing
the device model reference counting.
Once `device_initialize()` has been called, the embedded struct device
must be released via `put_device()`, allowing the release callback to
free the container structure.
Fix the error path by dropping the initial device reference with
`put_device()` instead of calli
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
In the Linux kernel, the following vulnerability has been resolved:
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
The ALB RX path may access rx_hashtbl concurrently with bond
teardown. During rapid bond up/down cycles, rlb_deinitialize()
frees rx_hashtbl while RX handlers are still running, leading
to a null pointer dereference detected by KASAN.
However, the root cause is that rlb_arp_recv() can still be accessed
after setting recv_probe to NULL, which is actually a use-after-free
(UAF) issue. That is the reason for using the referenced commit in the
Fixes tag.
[ 214.174138] Oops: general protection fault, probably for non-c
hfsplus: return error when node already exists in hfs_bnode_create
In the Linux kernel, the following vulnerability has been resolved:
hfsplus: return error when node already exists in hfs_bnode_create
When hfs_bnode_create() finds that a node is already hashed (which should
not happen in normal operation), it currently returns the existing node
without incrementing its reference count. This causes a reference count
inconsistency that leads to a kernel panic when the node is later freed
in hfs_bnode_put():
kernel BUG at fs/hfsplus/bnode.c:676!
BUG_ON(!atomic_read(&node->refcnt))
This scenario can occur when hfs_bmap_alloc() attempts to allocate a node
that is already in use (e.g., when node 0's b
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
In vidi_connection_ioctl(), vidi->edid(user pointer) is directly
dereferenced in the kernel.
This allows arbitrary kernel memory access from the user space, so instead
of directly accessing the user pointer in the kernel, we should modify it
to copy edid to kernel memory using copy_from_user() and use it.
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to
obtain a struct vidi_context pointer. However, drm_dev->dev is the
exynos-drm master device, and the driver_data contained therein is not
the vidi component device, but a completely different device.
This can lead to various bugs, ranging from null pointer dereferences and
garbage value accesses to, in unlucky cases, out-of-bounds errors,
use-after-free errors, and more.
To resolve this issue, we need to store/delete the vid
hwrng: core - use RCU and work_struct to fix race condition
In the Linux kernel, the following vulnerability has been resolved:
hwrng: core - use RCU and work_struct to fix race condition
Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread
exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex
lock, a concurrent hwrng_unregister() may call kthread_stop() again on
the same task.
Additionally, if hwrng_unregister() is called immediately after
hwrng_register(), the stopped thread may have never been executed. Thus,
hwrng_fill remains dirty even after hwrng_unregister() returns. In this
case, subsequent calls to hwrng_register() will fail to start new
threads, and hwrng
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix memory leak in ext4_ext_shift_extents()
In ext4_ext_shift_extents(), if the extent is NULL in the while loop, the
function returns immediately without releasing the path obtained via
ext4_find_extent(), leading to a memory leak.
Fix this by jumping to the out label to ensure the path is properly
released.
iommu/vt-d: Clear Present bit before tearing down context entry
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Clear Present bit before tearing down context entry
When tearing down a context entry, the current implementation zeros the
entire 128-bit entry using multiple 64-bit writes. This creates a window
where the hardware can fetch a "torn" entry — where some fields are
already zeroed while the 'Present' bit is still set — leading to
unpredictable behavior or spurious faults.
While x86 provides strong write ordering, the compiler may reorder writes
to the two 64-bit halves of the context entry. Even without compiler
reordering, the hardware fetch is not guaranteed to
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix e4b bitmap inconsistency reports
A bitmap inconsistency issue was observed during stress tests under
mixed huge-page workloads. Ext4 reported multiple e4b bitmap check
failures like:
ext4_mb_complex_scan_group:2508: group 350, 8179 free clusters as
per group info. But got 8192 blocks
Analysis and experimentation confirmed that the issue is caused by a
race condition between page migration and bitmap modification. Although
this timing window is extremely narrow, it is still hit in practice:
folio_lock ext4_mb_load_buddy
__migrate_folio
c
tpm: tpm_i2c_infineon: Fix locality leak on get_burstcount() failure
In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_i2c_infineon: Fix locality leak on get_burstcount() failure
get_burstcount() can return -EBUSY on timeout. When this happens, the
function returns directly without releasing the locality that was
acquired at the beginning of tpm_tis_i2c_send().
Use goto out_err to ensure proper cleanup when get_burstcount() fails.
power: supply: goldfish: Fix use-after-free in power_supply_changed()
In the Linux kernel, the following vulnerability has been resolved:
power: supply: goldfish: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler h
btrfs: fix EEXIST abort due to non-consecutive gaps in chunk allocation
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix EEXIST abort due to non-consecutive gaps in chunk allocation
I have been observing a number of systems aborting at
insert_dev_extents() in btrfs_create_pending_block_groups(). The
following is a sample stack trace of such an abort coming from forced
chunk allocation (typically behind CONFIG_BTRFS_EXPERIMENTAL) but this
can theoretically happen to any DUP chunk allocation.
[81.801] ------------[ cut here ]------------
[81.801] BTRFS: Transaction aborted (error -17)
[81.801] WARNING: fs/btrfs/block-group.c:2876 at btrfs_create_pending_block_groups+0x721/0x77
In the Linux kernel, the following vulnerability has been resolved:
net: usb: catc: enable basic endpoint checking
catc_probe() fills three URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX
- usb_rcvintpipe(usbdev, 2) for interrupt status
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a catc_usb_ep enum for endpoint numbers, replacing magic constants
throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints()
calls after usb_set_interface() to verify endp
ext4: fix dirtyclusters double decrement on fs shutdown
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix dirtyclusters double decrement on fs shutdown
fstests test generic/388 occasionally reproduces a warning in
ext4_put_super() associated with the dirty clusters count:
WARNING: CPU: 7 PID: 76064 at fs/ext4/super.c:1324 ext4_put_super+0x48c/0x590 [ext4]
Tracing the failure shows that the warning fires due to an
s_dirtyclusters_counter value of -1. IOW, this appears to be a
spurious decrement as opposed to some sort of leak. Further tracing
of the dirty cluster count deltas and an LLM scan of the resulting
output identified the cause as a double decrement in the
sched/rt: Skip currently executing CPU in rto_next_cpu()
In the Linux kernel, the following vulnerability has been resolved:
sched/rt: Skip currently executing CPU in rto_next_cpu()
CPU0 becomes overloaded when hosting a CPU-bound RT task, a non-CPU-bound
RT task, and a CFS task stuck in kernel space. When other CPUs switch from
RT to non-RT tasks, RT load balancing (LB) is triggered; with
HAVE_RT_PUSH_IPI enabled, they send IPIs to CPU0 to drive the execution
of rto_push_irq_work_func. During push_rt_task on CPU0,
if next_task->prio < rq->donor->prio, resched_curr() sets NEED_RESCHED
and after the push operation completes, CPU0 calls rto_next_cpu().
Since only CPU0 is overloaded in this scenario
In the Linux kernel, the following vulnerability has been resolved:
ipvs: do not keep dest_dst if dev is going down
There is race between the netdev notifier ip_vs_dst_event()
and the code that caches dst with dev that is going down.
As the FIB can be notified for the closed device after our
handler finishes, it is possible valid route to be returned
and cached resuling in a leaked dev reference until the dest
is not removed.
To prevent new dest_dst to be attached to dest just after the
handler dropped the old one, add a netif_running() check
to make sure the notifier handler is not currently running
for device that is closing.
In the Linux kernel, the following vulnerability has been resolved:
fat: avoid parent link count underflow in rmdir
Corrupted FAT images can leave a directory inode with an incorrect
i_nlink (e.g. 2 even though subdirectories exist). rmdir then
unconditionally calls drop_nlink(dir) and can drive i_nlink to 0,
triggering the WARN_ON in drop_nlink().
Add a sanity check in vfat_rmdir() and msdos_rmdir(): only drop the
parent link count when it is at least 3, otherwise report a filesystem
error.